Ubuntu Networking :: Connection Refused Through Wifi?

Jul 23, 2010

I cant connect with ssh to my workstation using my notebooks wireless lan. with cable I'm able to connect.so the funny thing is, if I first establish a connection from my workstation to my notebook (like ssh it or just ping the notebook) I'm able to create a ssh connection from my laptop to the workstation using wireless lan.scanning my workstation from the wireless lan of my notebook with

Code:
nmap -sT -p 22 ventury
says port 22 is closed

scanning it from the notebook with cable lan,it says port 22 is opened

scanning it from the wireless lan of my notebook an have sent a ping from the workstation before says port 22 is opened.ution.

I got a 64bit version of Kubuntu 10.04, up to date, installed on both, my workstation(ventury) and my notebook (defiant).the question is: Do I always have to ping my notebook first if I want to ssh from it to my workstation or is there some other solution? And why does it work fine with cable, but not with WiFi?

View 4 Replies


ADVERTISEMENT

Ubuntu Networking :: Setting Up Bluetooth Connection Between Two Computers Throws Connection Refused (111)

Apr 3, 2011

I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.

Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).

Any clues over here? I'm using pand 4.91 and blueman.

View 3 Replies View Related

Ubuntu Networking :: Get A 'Connection Refused' Error

Apr 21, 2010

I need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.

I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.

Here's what I tried:

Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)

Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.

I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.

In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.

Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.

View 1 Replies View Related

Ubuntu Networking :: Ssh/sftp Connection Refused?

Jun 13, 2010

I'm trying to establish a connection between two laptops using sftp but am getting the following error message:

Connecting to <IP>...
ssh: connect to host <IP> port 22: Connection refused
Couldn't read packet: Connection reset by peer

ftp isn't working either. Both machines are running Ubuntu and connect to the internet through the same wifi router in case that's relevant. What could be the problem?

View 4 Replies View Related

Ubuntu Networking :: Port 22:connection Refused With SSH

Dec 21, 2010

having a port 22:connection refused problem with SSH. None of what I have read has been what I have been experiencing, so I figured I would post here. The worst that could happen is this gets completely ignored, or I am told that there is already a solution, that I missed it, and directed to it. Here is my problem:

Just learned how to ssh into my machine a few days ago. Everything has been running smoothly until I ran into a little problem: all of a sudden I can't connect anymore. I have sshd-server installed and updated. I have sshd turned on

Code:
/sbin/service sshd start
And I even ran:

Code:
/etc/init.d/sshd start
Because I was told that it would start ssh from boot. Nothing has changed from today and yesterday and I haven't been having problems with port 22 being blocked.

I have also tried to ssh into the machine by the machine itself:

Code:
ssh <IP of machine>
with the same error.

View 4 Replies View Related

Networking :: SSH Connection Refused Port 22?

Mar 4, 2011

I get a connection refused error whenever I attempt to connect to a remote ssh server, I tried the test at and it says outbound ssh port 22 is not being blocked. I'm wondering what else could be the problem.

View 3 Replies View Related

Ubuntu Networking :: Trying To Open Two Ports - Connection Refused

Apr 12, 2010

I forwarded ports 28900(TCP/UDP) and 5029(UDP) to my linux box for a game. Testing my ports with a website now shows these ports as "connection refused" rather than "timeout" which means the connections are getting to my system but the iptables are blocking them. But I added 28900 as a test and it still won't accept anything on this port. This is my output of iptables -L

root@BPC3:~# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT tcp -- anywhere anywhere tcp dpt:28900

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT tcp -- anywhere anywhere tcp dpt:28900

What do I need to do exactly to add exceptions for 28900 TCP/UDP and 5029 UDP?

View 2 Replies View Related

Networking :: Open Connection Receive A Message "connection Refused"

Apr 6, 2010

i m using RHEL5 on my server machine and open suse 10 on my client machine.both system ping each other, firewall is off of my server machine,i put a file from my client to my server machine using scp command but ftp command is not working when i want to open connection i receive a message "connection refused".what can be the issue?

View 5 Replies View Related

Fedora Networking :: Ping OK But PuTTY Gets Connection Refused?

Jul 28, 2010

Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)

PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log

[code]....

View 8 Replies View Related

Networking :: Connection Refused Error 111 In TCP Client Server?

Aug 24, 2010

I am facing connection refused error 111 in TCP client server program, in android native code which in C , but if code is in JAVA it works fine, but i want to continue in C only, in manifest file i have given permission and ip, port is correct .What am doing wrong?? or is their any network setting?? am using UBUNTU 10.04and If both client server Linux pc it works fine. only if android emulator becomes client then am getting connection refused

View 1 Replies View Related

Networking :: Connection Refused In PuTTy And SQLyog Can Not Connect?

Feb 27, 2010

I researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.

I have samba running and share files with my windows 7 machine, so they do connect.

When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.

I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.

I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'

Is SSH on there by a different name or do I need to install the service.

(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)

View 2 Replies View Related

Networking :: Ssh: Connect To Host 192.168.1.11 Port 22: Connection Refused

Dec 11, 2010

I cannot use GRsync from Ubuntu Desktop to PCLinuxOS laptop.The 2 computers can ping each other. I have disabled both firewalls. My laptop IP address is 192.168.1.11This is the error on Ubuntu Grsync:

ssh: connect to host 192.168.1.11 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
Rsync process exit status: 12

On PCLinuxOS it wont say Ethernet is connected when trying a static address setup.However it does connect to the internet via auto Ethernet setup and a LAN cable. It then says connected. In order to use SSH and GRsync what programs are required? I have these installed on both machines: grsync openssh-client openssh-server

View 5 Replies View Related

Networking :: Ssh - Connect To Host 10.137.216.170 Port 22 - Connection Refused

Jun 15, 2011

I am facing trouble to scp from server to to my local machine where as the vice-vesra is working fine.

The error is like below.

lost connection

View 4 Replies View Related

Networking :: Telnet: Connect To Address 127.0.0.1: Connection Refused

Jul 8, 2011

I am facing an error when I run the following command telnet localhost 7777

Trying ::1...

telnet: connect to address ::1: Connection refused

Trying 127.0.0.1...

telnet: connect to address 127.0.0.1: Connection refused

View 2 Replies View Related

Ubuntu Networking :: Telnet To Port 25; Connection Refused For All But Local Host

Jan 12, 2010

I can telnet (while on the actual machine) using

Quote:

telnet localhost 25

When I try and use the local machine's ip

Quote:

telnet 192.168.100.9 25

I get

Quote:

Trying 192.168.100.9...
telnet: Unable to connect to remote host: Connection refused

[Code].....

This last one is strange as I the IP looks odd.

What I am doing wrong, and how do I fix it. After much surfing many mosts say that telnet is not used anymore but I want to use it to test my smtp server.

View 9 Replies View Related

Ubuntu Networking :: Ssh: Connect To Host Srv3 Port 22: Connection Refused

May 4, 2011

I have installed ubuntu 11.04 and I'm now trying to connect to existing SUSE servers on the LAN. My home directory has a shared NFS mounted home on the SUSE servers while my home on the ubuntu machine is local. I can log in using ssh to all the SUSE servers except one. I get:

ssh: connect to host srv3 port 22: Connection refused

If I use the IP address of srv3 directly it works. Also, before I changed the default machine name ("ubuntu") I could log into srv3.

nslookup srv3 works OK.
ping srv3 works OK.

Even if I completely delete the .ssh directory in both my ubuntu home and in my shared home on the SUSE servers I still cannot log in using the srv3 name, only direct IP address works. I'm thinking that the login I did to srv3 before I changed the machine name for the ububtu machine must have goofed up something

View 2 Replies View Related

Ubuntu Networking :: Remote Server 11.04 Connection Refused When Monitor Not Connected

Jul 14, 2011

i done desktop config in ubuntu server 11.04 and connected via tightvnc,uvnc and in remote desktop viewer from another ubuntu machine also. I am not able to access(connect) the server in GUI mode(when monitor is removed) but i putty is working fine in cmd line.

View 1 Replies View Related

Networking :: Dual Wifi And Wired Connection: Make A Specific Website Use Only Wifi?

Apr 8, 2010

I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)

View 2 Replies View Related

Fedora Networking :: Ssh: Connect To Host 192.168.1.100 Port 22: Connection Refused

Nov 27, 2010

I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:

Code:

inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0

However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:

Code:

ssh: connect to host 192.168.1.100 port 22: Connection refused.

I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?

View 3 Replies View Related

Networking :: Telnet: Unable To Connect To Remote Host: Connection Refused

Jun 12, 2011

I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.

Code:

telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out

I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused

Code:

telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused

[code]....

View 4 Replies View Related

Networking :: Telnet: Unable To Connect To Remote Host: Connection Refused - LAN

Nov 10, 2010

When i am trying to telnet to a machine connected in our LAN ..

telnet: Unable to connect to remote host: Connection refused

What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.

View 8 Replies View Related

CentOS 5 Networking :: Unable To Connect To Remote Host: Connection Refused

Feb 5, 2009

telnet localhost the output is...

Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused

I don't understand what is the problem. Its not configured properly how do i configure it?

View 7 Replies View Related

CentOS 5 Networking :: Error: Unable To Connect To Remote Host: Connection Refused, It Happens With Any Port

Feb 11, 2009

I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.

View 3 Replies View Related

Ubuntu Multimedia :: PulseAudio Volume Control - Connection Failed:Connection Refused

Jul 4, 2010

I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.

I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.

[Code]....

View 9 Replies View Related

Server :: Vsftpd Not Working: Connection Attempt Failed With "ECONNREFUSED - Connection Refused?

Apr 28, 2010

vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".

View 7 Replies View Related

Ubuntu Networking :: SSH And FTP "connection Refused" Check Point Router?

Jan 8, 2010

I have a new server running on xubuntu 9.10 behind a "Check Point Safe @ Office security appliance" (a LAN switch with an obnoxious firewall), and cannot make ssh, ftp, telnet, or vnc connections to it from outside the network. All I get are "connection refused" errors. I've made sure sshd, x11vnc, and proFTPd are running when I test the connections, and that ufw (firewall) has all of their default ports completely unrestricted. I've set a rule on the router to allow and forward all connections and all ports to the server, and I've also also put it on the exposed machines list, which reads like it should provide full access to any incoming connection. I still can't make connections to it, and it's driving me nuts. Does anyone have suggestions (or requests for more information)?

(ps- The router isn't really a choice: even if I bought another, I'd have to hide it and hope no one notices the policy breach)

View 1 Replies View Related

Ubuntu Networking :: Internet Ftp "connection Refused" Works Locally

Mar 23, 2010

I am trying to set up an ftp server on my home machine so a friend and I can exchange large files. I have set up pure-ftp server and gftp client.Pure-ftp works fine behind my Dlink DSL 2740B router using host name '192.168.1.100' but not over the internet using host name '80.47.xxx.xxx' I get the message

Quote:

Looking up 80.47.xxx.xxx
Trying 80.47.xxx.xxx:21
Cannot connect to 80.47.xxx.xxx: Connection refused
Operation cancelled

I have set up port forwarding as per the attachment.I haven't set up a software firewall and my iptables -L looks like:

Quote:

$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)

[code]....

The username I am using is part of "ftpgroup" and is the same user that works behind the router.Putting the computer in the DMZ doesn't help.I have a similar problem with SSH so I assume the problem is with the router.Other threads suggest the culprits should be port forwarding or a firewall but I can't see what is wrong.

View 1 Replies View Related

Ubuntu Networking :: "Connection Refused" - Script - Access All PCs In LAN Via Ssh From Server

May 10, 2011

I need to access all PCs in our LAN via ssh from our server in order to do some maintenance. All of them have Ubuntu or Kubuntu Lucid Lynx. Some of the PCs allow this access with no problems, but most of them not. They just answer "Connection refused". I realized that these PCs don't start sshd at startup. If I type "sudo service ssh start" manually in these PCs then sshd starts and all works. But I need it to be started automatically.

I tried some workarounds to solve with no success. I always tried to run a script at startup that could start ssh. If I write a script with this single command inside (service ssh start) and execute it as root, it doesn't work! It doesn't start ssh. But if I execute the same command directly in the command line, it works. I don't understand this behaviour. Also I don't understant why it doesn't happen to ALL the computers. Some of them start ssh at startup with no problems.

View 6 Replies View Related

Ubuntu Networking :: Keep Getting A "Connection Refused" Error?

Apr 16, 2010

I'm trying to set up SSH on my work computer (9.10) but I keep getting a "Connection refused" error.I can connect to myself with 127.0.0.1 no problem but not through my IP.

View 8 Replies View Related

Ubuntu Networking :: Interhack And Error "Can't Access() Script - Could Not Create Socket: Connection Refused"

Feb 12, 2010

I'm trying to run Interhack (spoiled variant of Nethack) for local game. Is looking through settings I saw that:

[Code]....

When I try to start it with ih_server option it gives me that error: Code: Can't access() script Could not create socket: Connection refused I think my problem is closed port: Code: nc localhost 9999 localhost [127.0.0.1] 9999 (?) : Connection refused How do I fix this?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved