General :: Internal Compiler Error: Segmentation Fault
Apr 6, 2010
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
I was in the process of installing something via apt-get. The laptop crashed halfway through, and now I cannot install anything new, do any updates/upgrades. I also cannot open Synaptic.When running apt-get in the terminal I get the following error:
When I compile my C program on SUSE, I receive a segmentation fault error. To my knowledge, this occurs when a program tries to recall memory but is not allowed to. So I'm using GDB for the first time to solve this problem. After a series of commands, I reach this point:
Code: #0 0x00002b13e1bab127 in getdelim () from /lib64/libc.so.6 #1 0x000000000040167b in main () at dmsp_cusp.c:158
Here's the offending code in dmsp_cusp.c: Code: 157 printf("enter the input file name:"); 158 getline(in_fname); 159 fp3 = fopen(in_fname, "r"); 160 if(fp3 == NULL) { 161 printf("can't open input file %s",in_fname); 162 exit(1); }
I am using Ubuntu 9.04 linux 2.6.28-11-generic. When I write a program that gives the "Segmentation fault" error, or when I send this signal (SIGSEGV) to a program, the "Segmentation fault" is shown and no core dumped. When I look for "core" file in the current directory, I can't find it, too.
I am using RHEL 6. When i use CAP3 software for the first time it successfully resulted. But second time when i used, it's showing "segmentation fault (core dumped)". Even after restarting and reinstalling it showing same error. When i google, i found it some memmory related problem. But no clear information.
I had Skype debian_2.2.0.35-1_amd64 on my Debian 2.6.32-5 amd64 and it was working without any problem. After re-installing my gnome desktop environment, my skype stopped working. I tried to re-install it. I found out it re-installs without any error but it doesn't launch and gives me "segmentation fault" error on terminal. I purged skype, deleted the .skype folder and installed it again with no luck. when I try to re-install skype via software center it says: "Sorry, 'skype' is not available for this type of computer (amd64)." what should I do to have the skype working on my system again?
I'm running ubuntu server 10.10 64 bit. 1. Set quota in /etc/fstab like this: /dev/sdb1 /var/www reiserfs defaults,usrquota 0 2 2. Checked quotas: # quotacheck -cavm quotacheck: Your kernel probably supports journaled quota but you are not using it. Consider switching to journaled quota to avoid running quotacheck after an unclean shutdown. 3. Tried to activate quotas using "quotaon -a" and got a segmentation fault error. When I change filesystem to ext3 (using mkfs.ext3 and changing /etc/fstab) it works well. So there are 2 problems, quotacheck warning about journaled quota and the segmentation fault error.
When I try to install wxGTK SlackBuilds. I get this error: Code: ./src/aui/auibook.cpp: In member function 'size_t wxAuiNotebook::SetSelection(size_t)': ./src/aui/auibook.cpp:3482: internal compiler error: Segmentation fault Please submit a full bug report with preprocessed source if appropriate. See [URL] for instructions. make: *** [auidll_auibook.o] Error 1 I tried redownloading the wxGTK-3.8.9.tar.gz file and reinstalling it, I get the same error.
I have a problem with a directory which contains my music collection. It can't be opened; all other directories work fine. I can cd into my ~/Music directory, but ls gives segfault and KDE programs hang when trying to open this directory. The problem probably has appeared after the rename of subdirectory under the Windows (don't remember particular ext3 driver; can check tomorrow).fsck says that the partition is fine. The whole disk is mounted on the single partition. Windows is located on another physical disk.Is there any way to recover my directory?
I have been trying for like 2wks to figure out why I keep getting seg faults in Viper WM from slackbuilds.I have it on 6 diff versions of slack, 12.2-current and also in debian and arch.In all of them VWM crashes with seg fault?!I really like it alot and need to figure out what the issue is?
I am using RHEL, and trying to execute a c program.I'm able to compile properly and execute until i reach a function getHandle, where the program gives a segmentation fault. Segmentation fault occurs in getHandle().
I have a strange problem. I have two Linux boxes. They are connected via a LAN. From machine 1 (Fedora Core 8) I can ssh to machine 2 (Fedora Core 3)without any problems if I am logged in as root on machine 1. If I am logged in as any other non-privileged user and attempt to ssh to machine 2, I get a segmentation fault and the connection is dropped (after ssh asks for the password).
Everything was working up until last Friday (8/6/2010). I did upgrade the machine 1 from 512Kb to 2.0Gb memory then..
machine1_root#ssh anyaccount@machine2 <-This works machine1_anyotheraccount$ssh anyaccount@machine2 <-segmentation fault
mount -t aufs -o dirs=$CHANGES=rw:/initrd/loopfs=ro none /unionCould anyone tell me what this command is trying to do..And, what could be the possible reason for it resulting in a segmentation fault
I have a post on [URL].. with "how to configure mutt mail client for mail server other that gmail" subject and it has no good result and at the end the person who answered me said it may be a mutt bug that I had to report it ,but I thing mutt is old enough to not to has this such a big bug. My problem is when I configure mutt with gmail it works fine but when I configure it with mine it returne segmentation fault error.and don not want to use other mail client in place of mutt. why mutt mail client get such this error with my configuration?
I would like to add a new user with useradd (on Debian 4.0), I get the message Segmentation fault. I made a strace, that says: access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) I have read maybe the libc6 is missing or damaged, so I installed it again (apt-get install libc6, install was successfull), but the problem is still there. I touched it (touch /etc/ld.so.nohwcap)
When I try to design a small filesystem, it always have the Segmentation fault.#: make makefile
Format will erase all context on the disk. Are You Sure? y
Program received signal SIGSEGV, Segmentation fault.
The question is,I cann't find the fseek.c anywhere,so I cann't solve the problem,can you help me?thanks very much.I think I should try my best to find the error in the code,code is too long,so the question i describe is not in detail.
My centos linux mailserver has crushed and does not allow any login form any user including root. I have managed to start it in single user mode but using vi editor, df command gives segmentation fault. I suspect the /var/* is full but I can neither remove any file/folder/mail/logs nor copy these to make a backup.Attempt to do this as single user/root is met with readonly files yet I have given full permissions to the files and the folders.
I am testing PCLinux 2009.1 prior to installing. My desktop currently runs on ME and has been out of use for some time. It still works however and I can still get online. I'm currently using a laptop running XP. I would like to make use of my old desktop and tried to test PCLinux 2009.1 today. I followed the instructions obtained online and booted from the Linux cd. The pc booted up ok and displayed the first screen allowing me to select the "Live CD" option. After enter my system hung up at "Probing SCSI Devices:Segmentation fault".
I recently bought an HP OfficeJet 6500 AIO printer. Since the printer has ethernet connectivity, I have managed to setup the printer with the 32bit openSuSE 11.2, 11.3 machines I have in my network. However, the 64bit 11.1 is another beast. I cannot make the printer work. The default and updated from officials repos hplip does not contain the PPD file for the printer/scanner/fax.I added the "Printing" repository (Index of /repositories/Printing/openSUSE_11.1) and downloaded the 64bit versions of hplip, hplip-hpijs packages. Now, the issues:hp-setup does not run with "Segmentation fault" error! Although I can see the printer, setup and modify it's configuration, cups cannot print, not even a test page.The errors I have are:
Code: Unable to execute /usr/lib64/cups/filter/hpcups: No such file or directory
Regarding the 1st error, I "solved" it by using the hplip-qt3 package from KDE_3 repository. And when I used that version of hplip, (3.10.9-4.2, instead of the 3.10.9-31.1 of the Printing repository), I had no more filter related problems (foomatic etc).For the second one, it is obvious that the problem is related to the location of the 64bit filters.The /var/log/cups/error.log has the following lines:
Code: I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstops (PID 30039) I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstoraster (PID 30040) code....
On two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
I am using a ubuntu 10.10 desktop,i cannot login to my system it doesnt accept the password. when i login in safe mode i get through but when i run any command i get segmentation fault.
I am no longer able to run K3B. I get an error "Executable: k3b PID: 8469 Signal: 11 (Segmentation fault)". I tried uninstalling and reinstalling K3B but still the same. I googled the error message and have not come up with any results other than it seemed to be a bug with earlier versions of Linux than mine. One change I have made to my system is updating the kernel to 2.6.35-30 generic
