I want to share my internet connexion via ad-hoc WiFi. If it's unsecured, it works fine, but when I use WPA encryption, it doesn't work anymore! I can connect from my iPod touch, but no internet. I connect to the internet from my laptop, via eth0 I want to share my internet connection via wlan0 I have no idea what's wrong
View 1 Replies
I've been reading around, but not had much success at all in trying to share the internet connection from my laptop to my phone.all the articles i read refer to earlier versions of Ubuntu and the packages they mention have become obsolete, according to the apt-get tool.im not that new to Linux, but my networking probably isn't up to scratch.if anyone could help me, that would be great, im using Ubuntu 10.04 at the time of writing.
View 2 Replies View RelatedI have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?
View 3 Replies View RelatedA while back I posted [URL] a question about Ubuntu 9.10 not recognizing my WEP encryption key. The problem that I had is still essentially the same: After upgrading to 9.10 beta, then trying to upgrade using the alternate install disc for the full version (because of the same problem) I ended up having to do a completely new installation. Anyhow the problem still stands: my internet card works and it detects available wireless networks, the only thing is that after entering the key in, it will attempt to connect, then after a min or so, it will ask for the key again, ad infinitum. The upshot is that I can't connect to the internet at all. Right now I'm on Windows 7 RC.
The only thing that has changed is that I tried disabling encryption entirely, and Ubuntu was still not able to connect (I think the connection just timed out after a few minutes). I should add that I have Verizon FiOS, an Actiontec router, and my computer (since it is far away from the router) connects through a Hawking_300N extender. Right now I am using Windows 7 RC (which unfortunately expires in a little over a week), so I can access the internet through Windows, and check for any posts, but I can't immediately provide any command outputs, I'd have to restart, and that would take a few minutes. Further, I have tried both Network Manager and WICD, both of which produced the same results. I have not tried any WPA encryption mainly because the router is shared, and I don't to mess with everyone using the router unnecessarily.
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI have a Dell Inspiron 1525 running Jaunty Jackalope. I have a good working wireless connection.
My daughter has a lot of iPod tunes stored on an old white chiclet Macintosh, which she needs to download to her iPod. Because the iPod is "corrupt" (meaning it was last connected to Windows!), we need to connect to internet.
Simplest way to do that would SEEM to be to plug an Ethernet cord between the two machines and let her Mac access internet via this Dell.
My experience with ethernet is, either it works out of the box, or it doesn't. If it doesn't, I have no idea how to make the connection work.
What do I have to do on BOTH the Jaunty and OSX sides to make the connection?
My computer running Ubuntu 10.04 (latest) is connected to the internet via an ethernet cable. I would like other devices to connect to the internet by sharing its connection via wifi. Is there a guide to do this? I haven't been able to find one which works out of the box.
View 2 Replies View RelatedI tryed to get network work like this share internet from wifi (wlan0) to ethernet (eth0).So the internet connection comes from the wifi and we share to other computer via ethernet[URL]But when I restarted my pc then it dont work and network says "wired network device not managed" How can I get it work aigan ?[URL]Now I have anohter problem when I connect autoeth then the wireless network dosent work anymore, I have to disconnect eth0 to have wirelles network working. how can I manage to get the bowh to work?
View 2 Replies View RelatedI have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedI'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies View RelatedI have network manager applet 0.7. How to create a wireless network? I have an internet connection and I want to share it with other computers wirelessly.
View 2 Replies View Relatedi have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View RelatedI have two wireless cards on my pc. One connected to the Internet and one free. I would like to connect the free one to a adhoc network with my netbook to share my connection because my netbook cannot reach the other side of my home.
View 1 Replies View RelatedI want to share my internet connection with my netbook which has a Win 7 starter OS. This is what I did: in Network Connections I set the IPv4 Setting of my network card to shared with other computers, plugged in the network cable into both machines, and now they both see a connection. Win 7 only sees the connection as Unidentified network with "No internet access". What should I do?
View 3 Replies View RelatedI have an internet connection called 'tether0' in ifconfig.I also have a connection eth0 which is connected to a wireless router. I'd like to share the 'tether0' connection with the wireless router, so that wireless clients will access the internet through tether0.The guides I've seen don't seem to apply to my situation.how I should proceed? I'm not very experienced with networking,but understand most of the basic and intermediate terminology.
View 1 Replies View RelatedIn the documentation at [URL] it says
Quote:
Note: To clarify the above example here is an example configuration that will work - * 1. You are already connected to the internet using your wireless on port wlan0 * 2. The ethernet port eth0 is connected to the PC that needs to share your internet connection (or you could wire eth0 to a router for multiple machines)
I am trying to do precisely this, with my laptop aready connected to the internet via my HTC Hero on port usb0, and the router needing to share the connection plugged into the laptop's port eth0. Port eth0 is set to "Shared" as the doc describes.
The router in question is an old WiFlyer pocket AP, which has a fixed and unchangeable IP address on its wired port of 192.168.7.77. What happens is that when I plug it into the laptop's eth0, NetworkManager pops up the "eth0 Connected" message...and then "Disconnected"...and then "Connected"...and then "Disconnected"...etc.
I want to be able to share my cellphone's Internet connection through the laptop and out into the WiFlyer so that others can get a wireless connection in a location that has no other form of connectivity.
[Rooting the Hero and making it an AP won't work: it can't run Froyo and it can't broadcast wireless.]
I am running Ubuntu 10.10 on several desktops but they are not close to my router. I would like to use a wireless connection to go from my router to my Ubuntu laptop, then a wired connection from my laptop to a desktop. My laptop is WiFi enabled and has an ethernet connection.
View 1 Replies View RelatedAfter some fiddling around, I have come to the conclusion my current wifi access point hates my other computer's Broadcom chip or the drivers thereof. So, my current idea is as follows. I would like to use my netbook to connect to the wireless network, and then connect my other computer to it through ethernet. My netbook is dual boot XP and Ubuntu (think Ubuntu is a version behind) and I would be fine to set up this sharing in either and just leave it on as a repeater station. My other computer is dual boot XP and Fedora and I would prefer this work to allow me to have network in both. I have a straight-through cable and have verified that my network card supports the automatic crossing over behavior.
View 1 Replies View RelatedI've been having 2 issues with my internet connection on ubuntu for as long as I can remember, I've tried updates but they haven't seemed to work so great and am pretty fed up with this. So I have a Netgear wg111t wireless usb dongle which I got working through ndiswrapper. The 2 issues I am having are:
1. After a random period of time my internet just decides to disconnect, the strange thing is the bars at the top still say I'm connected. The only way to get the internet working again is to turn the pc off and on. Another way I have experienced this happening is usually when I'm downloading something off a torrent.
2. After restarting my pc the wifi usb isn't recognised and I can't connect to the internet.
I have been trying off and on for weeks to share my Internet connection with a Windows XP client (netbook). While I can ping back and forth between the two machines, in the form of a ping test, I can't get to the Internet from the client, no matter what I try.
My Ubuntu 9.10 desktop (host) has two NICs, eth0 and eth1. eth0 connects to the Internet. eth1 goes to the Windows XP client. Regardless of whether I use an Ethernet crossover cable or a standard cable, I can get the two machines to talk to each other, but no further.
Things I already tried:
-Tried setting eth1 to "shared" mode in NetworkManager on the host. I set the Win XP machine to automatically acquire an address & DNS. Didn't work.
-Manually configured the IP settings on both machines, like this:
client:
address 10.0.0.2
subnetmask 255.255.255.0
gateway 10.0.0.1
[Code]....
Despite all of the above, I still cannot share the host's Internet connection with the client. I don't understand where the client's traffic is going, and why I can't share the connection. As far as I know, I am not doing any sort of firewalling or blocking on the host, so there is no obvious reason that the client's traffic simply disappears. I just know that whenever I open a Web browser on the client, all I ever get is error messages.
I have had no issues setting up a shared connection when the host runs Windows XP, so I am pretty sure there is no broken hardware causing the problem. Why can't I share the connection under Ubuntu?
My friend is trying to share his clearwire connection with me using Windows ICS. Using network-manager or wicd, I am unable to connect to his share. I am able to connect unencrypted with iwconfig, to the ad-hoc network, and then use dhclient to gain ip address.
I am not able to connect to WPA encrypted share using network-manager or wicd. nm-applet crashes when trying to connect. I am attempting to setup wpa_supplicant, but haven't got it working yet.As usual, the wireless networking out of the box experience in Ubuntu doesn't work. This is extremely frustrating. If Ubunut's goals are to be the default desktop, then these guys need to get wifi that "Just Works"...
I have two laptops (Dell & Lenovo), both have wifi.
I am having one wired Ethernet connection.
I want to share this Internet connection among two system , to access Internet from both the system.
I had tried by creating a wireless network, but was not able to do so.
I face in getting my wireless connection work. I am able to establish connection with my router and browse router configuration pages successfully. However, trying to access any other internet address (through browser or ping etc) results in intolerable poor performance (70% to 100% packet loss in ping). Ethernet connection (eth0) works perfectly though. Am furnishing the details below:
Netbook: HP Mini 311
Product No: VM257UA#ABA
Model No:311-1000NR
Ubuntu Netbook Remix:
[Code]...
I have been using windows 7 for awhile now, and i was using connectify (an internet connection sharing program that turns your laptop into a wireless router), and i'm planning on completely switching to Linux from a dual boot, and i was wandering if there is a way to share an internet connection (mainly to my PS3) on Ubuntu 10.04 x64, and wirelessly if possible, though i wouldn't mind if it was through Ethernet.
View 1 Replies View RelatedIm living in a student-city where we get one internet-cable in the wall each, if we need more we are told to use a switch. But, since ive got some tech that depends on wifi, I was wondering if its possible to setup my ubuntu to work like a sort of wifi-switch?
Basically, Im not allowed to set up anything that resembles a router..(so no dhcp) all i need is what a switch would do, only wireless and wpa/wep would be very nice
Atm ive got my cabled network plugged into my onboard ethernet-port, and ive got a d-link DWA-556 (Atheros AR5008 I think) wifi card that i wanted to use to share my connection. is this doable?
Trying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
Hello. I want to use my Debian box as an internet connection for a Win95 laptop. The laptop is old enough that the only port I have available to connect to the internet from is the serial port. I have heard that a serial port redirector will allow it to access the internet through my debian box, but I have no clue how to set one up. Any advice. Thanks
View 3 Replies View RelatedIm posting after reading through a lot of articles explaining the same thing on how to share an internet connection from a computer with two NICs.
I have the following simple setup
When I first followed this guide
I was able to ping between the GW and a client on the LAN but couldn't access the internet from it. So I started to configure different things to get it to work which failed.
Now I can't ping between GW and the LAN. I tried to follow the same guide over again and even flushing the tables but still...
These are my current settings (without any chains).
(this client also has a wireless connection displayed in 'ifconfig')
Over the last several days, I've been trying like hell to share my (wired) Internet connection with a netbook, running Windows XP, attached via crossover cable to my desktop's extra NIC (eth0). The eth0 link is established, but I can't get to the Internet from the Windows XP machine.I can ping one machine from the other, but any bits sent from the Win XP netbook mysteriously disappear when trying to reach any website.
There is no firewall running on the Ubuntu machine as far as I know. Windows Firewall is likewise disabled on the Windows XP machine. The Ubuntu machine connects to the Internet through another wired NIC, eth1.In Windows XP parlance, what I am trying to do would be called "bridging," where eth0 and eth1 would be the two parts of the bridge. In fact I already made it work, with both the netbook and my desktop running Windows XP. It took about 5 minutes.I can't believe what a huge pain this has been in Ubuntu. I'm pretty much ready to give up. There seems to be no way to get an Ubuntu system and a Windows XP system to share an Internet connection.
