im having a lot of issues with my video card, i can't install it correctly i get low graphics mode and some times a black screen..login+password i had read a lot of post, installed ubuntu a few times, done a lot of stuff but i can't get it, im a noob, using ubuntu for a week now and i love it.
View 6 Replies
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI tried to run the XBMC live disc but could not fully boot. Each time I could only get to a command prompt after the XBMC splash screen with spinning circle. So I thought, "Maybe because my computer is sort of old (Pentium 4, 2.26 Ghz, 512 RAM) it doesn't like the XBMC Live disc. It will probably work if I install to the HDD." I installed it only to get the same result, XBMC splash screen then loading of command prompt. Does anyone know how to fix this? Is the computer compatible?
View 1 Replies View RelatedI'm looking for a good video editor for after I make a video. I'm currently using gtk-record desktop, and I don't have a problem with that. It's when I use Pitivi that I actually can't edit the video or render it correctly. How to render the actual project. I'm using 10.04.
View 7 Replies View RelatedI have a couple of .avi clips in which the sound plays 2 seconds before the video, so I need a software that can re-sync the sound correctly with the video with affecting the video/audio quality, what program can I use? What is the name of this feature in video editing programs? I am using Ubuntu 10.04. I noted that the Multimedia & video forum have only threads about problems in playing videos & cards drivers problems.
View 3 Replies View RelatedIt seems my video drivers are not correctly installed. However, I'm not sure how to correctly install them.I'm using Ubuntu 10.10, nVidia Geforce Go 7700.
View 1 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
My desktop is off to the left and there is a space at the right. How do i correct this. I know i have done this before but i forgot. I looked at the 'Nvidia x server settings' but i have never figured the things in that out!
View 3 Replies View RelatedI'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies View RelatedI'm looking to put a new video card in my desktop. I need one that will be able to handle H.264 at 1920x1080, and I would like to find one that can do HDMI with audio. Shopping for video cards, as I heard somewhere, is the kind of thing that makes you want to bang your head against a wall until you go blind, because then you won't need to worry about it any more... someone will be able to recommend a model, or at least a chipset or something, before I rip my own eyes out.
View 6 Replies View RelatedI currently use "MSI Radeon HD 3650 Graphics Card - ATi Radeon HD 3650 750MHz - 512MB GDDR3 SDRAM - PCI Express" that have no HDMI and some problems with Ubuntu. Due to the Ubuntu compatibility problems I decided to ask you guys for recommendations before upgrading to a new video card.The only "demand" is that the card must have dual HDMI outputs, one for the monitor and one for the TV.
View 6 Replies View RelatedI'm planning to upgrade my wife's computer when 10.04 comes out, what is a good cost effective video card to support compiz effects?
View 5 Replies View RelatedI'm working right now with a newly installed Lucid 64-bit. Everything it's fine, but I would like to use the dual monitor for my work, and so I decided to ask to buy me a video card, since what I have now is an onboard graphic that doesn't allow me to do it. I don't need to play games (well I don't think my boss will be happy about it ), and I would rather go for a not expensive solution. But I have some doubts regarding the compatibility with my linux. I found several things on the web, but nothing regarding the video cards that I individuated. If the card is auto detected, it would be better of course.
The cards I was interested are:
ASUS RADEON HD4350 1GB DDR2
SAPPHIRE RADEON HD5450 512MB DDR3
But then i've seen on the web you might have problems with ATI in linux and so I went looking also for Nvidia which I found is generally better implemented under linux: ASUS GEFORCE GT 210 512MB DDR2
PALIT GEFORCE GT 220 SUPER 512MB DDR2 I don't have many models among which to choose, because of some conventions at my workplace. The tables of compatibility with ubuntu that I found are all related with much more expensive models, or models that I don't have in my lists. Could somebody tell me if one (or more) of the cards mentioned above work under ubuntu 10.6 64-bit? I have a Hewlett Packard system with:
HP 3674h motherboard
Intel core2 duo 3.16 GHz
8Gb RAM
250 HD
When I watch a HD movie, the video will freeze momentarily sometimes. Would a 8400GS or 9600GT take care of this?
My video card is a 7300 le,
CPU= Phenom 8450
Memory= 4gb PC2-6400
Power= OCZ Fatal1ty OCZ550FTY 550W
I recently installed a new evga nVidia GT 430 video card in my Ubuntu 10.10 32-bit system. This had the unforseen side effect of eliminating my sound.
I had no idea that the new video card would include a new sound module. My intent is for my system to use my Soundblaster Audigy2 soundcard in 5.1 output mode. The system still seems to be configured to do that, but the nVidia HDMI Stereo output module seems to have taken over in Sound Preferences.
Here is the output of lspci:
Code:
lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
[Code].....
I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.
View 7 Replies View RelatedI just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:
Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection
[Code]...
I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?
Seemingly at random when I reboot my PC which I do every now and then, when I get it back up and running it will sometimes have switched my video card from using /dev/video1 to /dev/video0 or vice versa. It's not a huge deal but it is slightly annoying and I would like to understand why it does it and how I can stop it from flip flopping.
Not sure what you need to know in order to answer but I use 9.10, gnome 2.28.1, the video card is a Hauppauge 150 PVR something.
I'm trying to find a US source for an inexpensive PCI video card, most bang for the buck.It must be a standard PCI card.
View 9 Replies View RelatedI'm looking at upgrading my motherboard and graphics card. Ideally, I'd like to have 2 monitors running at once (DVI), and an output to an LCD projector (HDMI). If I can't have all 3 working at once, I'd like the 2 monitors on all the time (off the graphics card), and then switch from the monitors to the HDMI output so that only the projector is getting video.
So, If I get a motherboard with onboard HDMI, would it be possible to run the HDMI out at the same time as the graphics card output?
I have a GeForce 8600M GS card in a Dell Vostro 1710, which has appeared to be playing up lately, but I'm unsure whether it's the hardware itself or have I not properly set things up.
I have Ubuntu 10.04 installed with compiz, and 'rotate cube' enabled. The 'deformation' is set to cylinder. I recently tried using rss-glx (really slick screensaver) when the slow-down and screen freezes happened.
The symptoms:
Odd behaviour begins after attempting to log in after the screensaver has blanked the screen, i.e. screensaver ran for a while then the screen blanked. When logged back in, a 'cylinder' rotate freezes and the screen does not refresh. Clicking around the screen refreshes it somewhat. Switching between screens becomes next to impossible and a restart is required.
In general rotating the cube is OK, rotating the cylinder seems a task on the video card and rotating the sphere is horribly slow.
Things done so far:
Each time I log in, I need to open the NVidia settings and change the powermizer to 'prefer maximum performance'. On next reboot I will try this in xorg.conf code...
My questions are:
- How can I verify the card is working correctly, enough to be able to decide whether it's hardware or software at fault?
- If the hardware is proven to be OK, what am I then leaving out?
I am trying to install Gnome remotely via SSH. So far, everything is fine, but desktop-base refuses to install. Here is the output:
[URL]
I searched around and found this thread: [URL], and that appears to be the same issue. Although, I don't quite understand how to fix it.
It's a geforce 9500gt 1Gb 128bits. How can i see if it's working or not? And where can I find a driver to it? I've looked in the geforce's site and i've downloaded a file with the extension .run, but this file didn't work. What should i do? Core2Quad, 4GBram, geforce 9500gt 1Gb 128bits, asus's motherboard, hd 500gb sata. Ubuntu 9.10 64bits.
View 6 Replies View RelatedI'm trying to get the screen graphics working correctly on a newly purchased ACER Aspire 7740G laptop. It has a 17.3" 16:9 screen with an ATI Radeon Mobility HD5470 512MB graphics card.
The command LSPCI in Terminal gives.....
"02:00.0 VGA compatible controller: ATI Technologies Inc Device 68e0"
I've also uploaded /var/ log/ xorg.0.log.
In System/Preferences/Display the pink coloured monitor screen has 'UNKNOWN' displayed on it with only 3 resolutions available.
I installed the ATI Catalyst Control centre but when it initialises, it produces an error saying that there is no driver installed - I thought the XORG log shows that the driver is installed.
The command ATICONFIG in Terminal reports.........
"aticonfig: No supported adapters detected" !
I've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
ron@desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
[code]....
Does anyone know an Ubuntu 10.10 compatible video capture card that has composite connections for video and audio (yellow, red and white)? It must be external and do its own processing so it doesn't use the computer's own CPU. I intend to capture a live stream and have the Ubuntu PC serve it to other computers. I may use VLC or MythTV. I have looked on various related sites but finding a compatible USB one which does its own decoding is hard to find.
View 2 Replies View Related
