When I watch a HD movie, the video will freeze momentarily sometimes. Would a 8400GS or 9600GT take care of this?
My video card is a 7300 le,
CPU= Phenom 8450
Memory= 4gb PC2-6400
Power= OCZ Fatal1ty OCZ550FTY 550W
when I'm traying to watch 720p and 1080p movies, MKV format. The movie is breaking all time, do I need to install any codecs or extansions, or use another application.I tried VLC player, and it is same. Well i had same problem with Ubuntu 10.10 and could't fix it.
View 2 Replies View RelatedI made a mistake and bought a $50 IBM A50 to use as a media server...Installed Karmic on it and figured out that the video card couldn't handle anything beyond the factory setting of 800:600, something like that...
I have not taken the time to learn about video cards and now I suffer....I found this "solution" EVGA 256-P1-N399-LX GeForce 6200 256MB 64-bit GDDR2 PCI Video Card
Which has mixed reviews on newegg
I want to use this machines( or another) to playback movies on my flat screen. I suppose I need to find out more about my TV as well...
I use Ubuntu 10.04. I need to play a full HD (1080p) video on my pc:
CPU: AMD Athlon X2 7750 BE
MB: ASUS M3A32-MVP
RAM: 2x1GB KINGSTON 1066MHz
VGA: ASUS 8800GS
I think my PC should be able to play it, but the video is really not fluent. What should be wrong? Power less hardware? Wrong codecs?
I can play any video file even 720p but when I am trying to play 1080p video files my video lags.
View 5 Replies View RelatedI have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. Do you or does someone you know have the same setup as I do? If so, do they have 1080p video playback working? If so, what driver are they using? I've tried following every guide I could find, but no luck so far. I have libvdpau1 and libvdpau-dev installed. I have the nvidia 195.36.24 driver installed (I used the nvidia installer). I have mplayer installed (which I compiled from source with --enable-vdpau).
I try to run mplayer with this command:
Code:
mplayer -vo vdpau -vc ffh264vdpau path/to/myfile.mkv
I get the following message in my terminal:
Code:
Error opening/initializing the selected video_out (-vo) device.
I have libvdpau-dev and libvdpau1 installed.
After Googling this problem, I found a post that suggested the following steps:
Code:
sudo add-apt-repository ppa:nvidia-vdpau
sudo apt-get update
sudo apt-get install nvidia-glx-195 nvidia-195-modaliases
It turns out that I had already added the nvidia-vdpau repository. However, despite that, I get:
Code:
E: Couldn't find package nvidia-glx-195
The same problem exists for the nvidia-195-modaliases package. Do these packages exist? Is there some other way to get them?
I'm just getting started with Ubuntu 64-Bit. Basically, I have Totem Movie Player and VLC Media Player installed and every time I watch a movie in either one of them. If I tab out of them or minimize them, when I bring the media player back up the screen is black. The sound still works perfectly but I can't see the movie and I've tried several media players out and they all do the same thing. Basically I can't multitask or bring up anything else while I watch a movie or I have to restart the player because of the media screen going black.
I'm not sure if my computer specs will help but here they are:
Ubuntu 10.04 Lucid 64-Bit
Intel Xeon X3210 2.13GHz Quad
4GB DDR2-800 RAM
ATI Radeon 4870 512MB Videocard
every video is flickering and not smooth why is that and what can i do about it.
View 1 Replies View Relatedi have just recieved some updates to my system, after the updates my video players are all showing movies in blue. online videos are fine but all my videos on my laptop are blue.
View 3 Replies View RelatedI have recently installed Lucid on an Acer Aspire 5570Z laptop. It has an Optiarc DVD RW AD-7530A DVD-RAM writer. I am having trouble in playing video/movies on DVD.
When I am inserting a movie DVD, the drive is working (i.e. is busy) continuously but the disc is not being recognized and mounted. Disc Utility is showing "No Media Detected".
The same DVD discs are playing OK in my desktop (running Hardy) and on another laptop (running Lucid).
However, that Audio and data CDs are playing/reading OK in the same drive. Even blank DVDs are being recognized and mounted OK.
I know Ubuntu has limited flash support but how else do I view a high definition 1080p video? Its all choppy to say the least, after a few seconds, its just like a slide show. I am using flashplugin-installer from adobe to render flash files.
View 2 Replies View RelatedWhat software(exceping drivers) do you need for maximum performance with blu-ray movies or .mkv files? Is there any place I can find linux codecs or video players? I'm using Slackware64 13.37
View 7 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
I wanting to build a media player/PVR MythTV linux PC for my TV which will be capable of simultaneously encoding video(both h.264/MPEG-4 and xvid) whilst playing back 1080p video. That way I can watch hd video I've recorded whilst I'm recording and converting another programme in the background.
Hauppauge HVR-4000HD - Video Capture + DVB-S2 receiver
Shuttle XPC SG45H7 - Barebone with built-in Intel GMA X4500HD Graphics
Intel Core 2 DUO E6500 2.93GHZ
2GB RAM
...And if not, what do I need? Would a quad core CPU be a safer bet, or is that overkill?
I ended up getting 1080p playback working perfectly with vlc on my 1201n about 2 months ago, but then I decided I'd reformat my system to clean it out a little. There's other tutorials out there, but none are as straightforward as that one. I literally copy and pasted the commands and it worked like magic...now I have the latest nvidia driver installed, but vlc 1.1 won't let me check the GPU acceleration box under Preferences > 'Input and Codecs'.
I remember that this tutorial gave you PPAs for debs of vlc pre-1.1 git files, and a list of all the necessary software to install (vlc, vdpau, smplayer). It was hosted on a site other than ubuntuforums, and it was the only one that worked at the time for me.
Anyone know what I'm talking about, or give similar links? I think with this new nvidia driver stuff is actually being slowed down a bit, but that doesn't explain why VLC won't let me activate GPU acceleration.
I have a high resolution file (1080p) encoded with H.264 and when I play it back, it lags at certain parts (and enough parts to destroy the job of watching the video).
I don't think that my computer is that crappy and it has been able to play many H.264 encoded files with high resolution - so there is always a possibility that this file is just encoded poorly (lacking a better computer, I cannot test).
For information, I'm running Ubuntu 9.10 64 bit. I have a Intel Core2 Quad CPU Q9550 (@2.83 GHz). I have 8 GB of RAM (forgot the speed off the top of my head). And a Nvidia GeForce GTX 280 (1 GB of memory).
During the playback, the RAM is far from being completely used; however, it seems that one (and only one) of the cores of my CPU becomes saturated at 100% precisely at the moments in which the file lags. When the CPU utilization is below 100%, there is smooth playback.
My question is - is it possible to use all four cores during playback, or is such a process not capable of easy parallel processing.
Another side question is, how can I be sure that my GPU is being used in the decoding process - or is that also being under-utilized?
This forum has been a wonderful treasure of knowledge. I am stuck up with something thats getting onto my nerves. I have installed lucid and followed the perfect desktop guide.
I have a mkv file (4.6Gigs) 1080p HD with DTS 5.1 audio. when I play the file either of the video or audio gets stuck (mostly video) I tried every possible configs from this forum but in vain. Im using Dell LAT D830 with 2GB RAM 2.2GHz CPU NVIDIA Graphics.
I'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies View RelatedI'm having trouble getting 1080p out my xfx 9800gt that has an onboard hdmi socket. No doubt my HDTV is 1080p (panasonic TH-427PZ70B a few years old now), and it will do and has run at 1080p 60hz.
It auto detects the display as simply panasonic-tv and outputs at 1080i. As I've been running mythtv with tv tuners this actually worked quite well as dvb-t is interlaced anyway and most ofthe HD video files I play are 720p. However I would like to run it at 1080p for all the usual reasons- especially as I have some 1080p files I'd like to enjoy in all their glory!!
This doesn't seem to be ubuntu specific as mandriva behaves the same, and makes no difference if I use the open source (default with 9.10), the official nvidia package or as I've just tried 10.04 with default and nvidia.
I've searched around for nvidia hdmi 1080p etc but can't seem to dig up anything useful. Surely I should be able to force the graphics card to output standard 1080p 60hz?
Should I be able to do this through xrandr by setting a modeline or in xorg.conf or nvidia control pannel!?
I had a problem playing full HD videos (1080p @ 30 fps), frames dropped, CPU utilisation (on 1 of 2 CPUs) maxed out etc.As I'm still stuck on Hardy I didn't find much stuff that directly answers my question on how to play this... After hunting about a bit the following two links gave me some idea of what needs to be done, namely install a new version of Mplayer that supports VDPAU (NVidia's hardware video acceleration solution).
[URL]
Luckily I had a NVidia video card that supports VDPAU and I had installed the NVidia proprietary drivers before [URL]To check if your NVidia card supports VDPAU please look at the proprietary driver release details.
Quote from Wikipedia:
"Currently only second generation of PureVideo HD bit-stream processor in some of NVIDIA's GeForce 8 series and later graphics cards hardware that has support since the Beta device driver version 180.06.[4] Unsupported hardware from the GeForce 8 series includes the 8800GTS 320/640MB editions and the 8800GTX. Later cards based on the G9x series cores e.g. the 8400GS and the 8800GTS 512mb (G92 core) are supported."
I usually play using VLC but was put-off from trying to upgrade that to CDPAU support because of this little detail from the Ubuntu forum links above:
Quote:
"VLC is available with vdpau by way of VA-API, in this PPA:[URL]However, to install it you'll have to upgrade your precious and very touchy ffmpeg packages. There have been a couple of SONAME upgrades since Karmic's ffmpeg was released, and this will inevitably result in breakage of anything that A) uses dynamic ffmpeg, and B) is not rebuilt against the new version, ie. every package that's on your system that didn't come from that PPA."
I've tried watching material in 1080p resolution on my notebook and i experienced some slowdowns, tearing, etc. Video is encoded by x264 and sound is flac 5.1, all in mkv container. I know it's quite heavy one, but it was playing quite good on windows+CoreAVC, so i expect no less from my shiny Ubuntu I did a bit of googling and found out that AVIVO/UVD/Whatever is already turned on by default in fglrx drivers when using Xv, yet CPU is struggling on 90-100% load. Is there a way to turn hardware decoding on? It doesn't seem to work by "default" (or i'm too desperate to acknowledge that hardware acc is already on and still struggling to decode this ).
Specs of my notebook:
Intel Pentium Dual-Core T4200 2.0 GHz
Mobility Radeon HD4570 256MB with fglrx from maverick repo
3GB RAM (doh!)
mplayer and codecs from medibuntu repo
mplayer uses -vo xv -va pulse , ffh264 and ffflac codecs
I'm looking to put a new video card in my desktop. I need one that will be able to handle H.264 at 1920x1080, and I would like to find one that can do HDMI with audio. Shopping for video cards, as I heard somewhere, is the kind of thing that makes you want to bang your head against a wall until you go blind, because then you won't need to worry about it any more... someone will be able to recommend a model, or at least a chipset or something, before I rip my own eyes out.
View 6 Replies View RelatedI am preparing to purchase a new laptop, with Ubuntu 10.04 built in, from System76 with 8.0 GB DDR3 1333 MHz RAM, ATI 4570 graphics with 512 MB GDDR2 memory, 500 GB 7200 RPM SATA II hard drive, and I get to choose a CPU. I am wondering: 1) Would I get better 1080p video playback performance with a dual core Core i7-620M or quad core Core i7-840QM CPU? 2) What is the best playback software in Ubuntu that takes full advantage of such a CPU, and also the GPU?
View 3 Replies View RelatedI currently use "MSI Radeon HD 3650 Graphics Card - ATi Radeon HD 3650 750MHz - 512MB GDDR3 SDRAM - PCI Express" that have no HDMI and some problems with Ubuntu. Due to the Ubuntu compatibility problems I decided to ask you guys for recommendations before upgrading to a new video card.The only "demand" is that the card must have dual HDMI outputs, one for the monitor and one for the TV.
View 6 Replies View RelatedI'm planning to upgrade my wife's computer when 10.04 comes out, what is a good cost effective video card to support compiz effects?
View 5 Replies View RelatedI am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI'm working right now with a newly installed Lucid 64-bit. Everything it's fine, but I would like to use the dual monitor for my work, and so I decided to ask to buy me a video card, since what I have now is an onboard graphic that doesn't allow me to do it. I don't need to play games (well I don't think my boss will be happy about it ), and I would rather go for a not expensive solution. But I have some doubts regarding the compatibility with my linux. I found several things on the web, but nothing regarding the video cards that I individuated. If the card is auto detected, it would be better of course.
The cards I was interested are:
ASUS RADEON HD4350 1GB DDR2
SAPPHIRE RADEON HD5450 512MB DDR3
But then i've seen on the web you might have problems with ATI in linux and so I went looking also for Nvidia which I found is generally better implemented under linux: ASUS GEFORCE GT 210 512MB DDR2
PALIT GEFORCE GT 220 SUPER 512MB DDR2 I don't have many models among which to choose, because of some conventions at my workplace. The tables of compatibility with ubuntu that I found are all related with much more expensive models, or models that I don't have in my lists. Could somebody tell me if one (or more) of the cards mentioned above work under ubuntu 10.6 64-bit? I have a Hewlett Packard system with:
HP 3674h motherboard
Intel core2 duo 3.16 GHz
8Gb RAM
250 HD