Ubuntu :: New Install But Nvidia Card Not Showing Desktop Correctly
Dec 15, 2010
My desktop is off to the left and there is a space at the right. How do i correct this. I know i have done this before but i forgot. I looked at the 'Nvidia x server settings' but i have never figured the things in that out!
I have this problem for a while but didn't notice it until lately(i did reboot the machine for few months). Now that i reboot it frequently i notice that the clock is always not what is supposed to be. I'm in Toronto, Canada so it should be GMT -5:00. Sometimes it shows GMT-6, sometimes -10, now is GMT -11. Anyone would know why i have this issue? I'm running Suse11.1 on a 64 bit. My laptop which runs on 32 bit is working fine.(well probably different versions for kernel and kde.(whatever was in th repository to be updated i updated)
2.6.27.39-0.2-default Version 4.3.4 (KDE 4.3.4) "release 2"
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
im having a lot of issues with my video card, i can't install it correctly i get low graphics mode and some times a black screen..login+password i had read a lot of post, installed ubuntu a few times, done a lot of stuff but i can't get it, im a noob, using ubuntu for a week now and i love it.
gtkrecordmydesktop gives me crummy playback if i have compiz on is there a recorder that does not give this problemi attached a screen shot of the playback issue
I'm going to be building a new desktop computer and I'm trying to decide between either an ati or nvidia graphics card. I've previously only used integrated intel graphics in my laptop and I've never had any problems. However, from looking at the forums it looks like neither ati nor nvidia will be quite as smooth. What's the current consensus for ease of use?
Well I was currently using Ubuntu 9.10 and up until just before the release of 10.04 it was allowing me to view what is now my problem. I attend an online school so this is a big problem for me. I can not view a course button that accesses my course. I was able to view these buttons a while ago in 9.10 but then I couldn't anymore and still can't in 10.04.
I tried results in Firefox, Opera and Konqueror and nothing is different. Here is a picture for what I am trying to show: [URL] The button should be in the lower left of that frame. It is not a website error because it works perfectly on my Windows box. Is there a quick fix like Javascript that is not showing correctly or something similar? AT first I thought it was a theme problem but I changed my theme and no different.
I have a strange problem, icons are not showing up correctly in various places, attaching some screens to better show the problem.
Anything I open that has a notification icon, just appears exactly the same, as you can see in one of the screens even hovering over certain things brings up that same icon...
Edit: After some searching I see it's an nvidia bug...
fonts not showing up correctly in web browsers and the likes, more specifically bold fonts. On some sites, these show up correctly, but on others, they don't. I have no idea what's causing this, as it seems to have happened without me doing anything (like, literally, I opened a terminal window, then went back to my browser (Chrome, but I suppose that doesn't matter, as it happens on all browsers) and the problem showed up. Note that these fonts used to show up just fine.
I am running Fedora release 14 (Laughlin) and my Vim version is 'VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Nov 16 2010 17:05:33)'. I've been trying for quite some time to get a more informative status line in my Vim window but to no avail. I am pasting my very last effort which is as simple as possible. Here is my .vimrc file:
Code: set statusline=%B set laststatus=2 Here is what the status line shows:
Code: Documents/Work/fileName.txt
The .vimrc file does get processed, I've tried many other 'set statusline' combinations but everything failed.
I've just managed to compress my LVs, extend my VG to my new SSD, move the LVs to the SSD and remove the old disk from the VG. All is well and good (mind you, I did kill my /home partition but it's sorted now...)
My next step was to shrink the PV (I think that's what I want to shrink?) so that I can add another partition to the SSD (to reduce compile times). See below for my current setup. I have a 35G PV with LVs totalling around 33G but the "partition" of the LVM is still 58G.
I found that some application icons in the panel bar (at the bottom) is not shown correctly, which makes it hard to tell which application it is when I iconify that application. For example, the emacs application icon in panel bar used to be like a goat head. But now it looks like a generic icon, which I cannot tell it is an emacs application. I attached a screen shot here to show this issue.
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
I am thinking to install Debian on my (currently Ubuntu) workstation because of some issues. My questions are:
- Should I use a daily build iso or the Alpha1 iso for Squeeze? - Which is the best way to install my 8600 nvidia card? - Is it ok if I use the same password for root and user, since it's a single-user system?
I need to install the nvidia driver on a PC that don't have any nvidia card in it.It's on a PXE server with read-only client's / . Those clients have nvidia cards.When this server had a nvidia card in it, i simply chrooted in the exported / , then i could install this driver.
I have been looking in ebay and it looks like I can buy any Nvideo Card I want. So Im looking for something that is inexpensive But it has to be easily installed as far as the drivers are concerned . Ideally just install it and it can be recognised and drivers installed and set up. It probably is asking for to much but Im new to linux and Ive read a few descriptions of installing drivers and I dont have a clue. My old Via/s3g is freezing the screen. I need very little when it comes to a video card, I dont do games, I watch some you tube . So simple and inexpensive is the word.
This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
I'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code: Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions. Code: kernel-headers-2.6.18-238.12.1.el5.i386 kernel-devel-2.6.18-238.12.1.el5.i686 Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5. Code: Select all$nvidia-detect Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1) Uh oh. Your card is not supported by any driver version up to 304.125. A newer driver may add support for your card. Newer driver releases may be available in backports.
A few years back I gave linux a try. It was fun but eventually I dropped it because simple tasks like installing software were always a practice in goose hunting and copy/paste command marathons. I am trying again to get fedora up and going. Thinking many of the old methods would be cleaned up by now. I was trying to install nvidia drivers for my 8800 card.
I download the *.run file and it tells me I need to disable "X...etc" so I init 3 to the command prompt and run the *.run file there. Then the installer says.... "hey buddy.. you need gcc to make this work". ok.. I type init 5 to get back to the internet browser. So I search about google for a few moments and then find the yum command for getting gcc installed. Run the gcc and again... init 3 to get back to the command prompt and run the *.rn file for the nvidia drivers. This time the installer says... "hey man... you need the kernel source tree".
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
I have a problem with getting the picture to display properly on my HDTV. Using the regular driver (whichever that is) the picture displays flawlessly, but when I'm using the NVIDIA driver it displays really weird. URL...As you can see the top and the right of the picture is missing, and there is a large black bar to the left of it.Since it only does this with the NVIDIA driver I guess the driver is at fault here. The graphics card is a 8400GS and I'm running Xubuntu 10.10. The HDTV has a native resolution of 1366x768, and I've connected to it using HDMI.
I have tried messing around with overscan compensation in nvidia-settings, but it didn't help much.What can I do to fix this?
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?