Ubuntu Multimedia :: Finding Compatible External USB Video Capture Card
Nov 11, 2010
Does anyone know an Ubuntu 10.10 compatible video capture card that has composite connections for video and audio (yellow, red and white)? It must be external and do its own processing so it doesn't use the computer's own CPU. I intend to capture a live stream and have the Ubuntu PC serve it to other computers. I may use VLC or MythTV. I have looked on various related sites but finding a compatible USB one which does its own decoding is hard to find.
I am not having a big problem at all but my built in video system is clearly behaving like it does not have the right driver.
Are there any video cards out there that are directly well-supported by linux? i.e. genuine linux drivers that allow the card to function at full capacity or close?
I'm having problems with my video card (Radeon X1600) ever since I upgraded to 10.04 (video is fine until I stress the video card (eg using 3D acceleration)). This appears to be a problem with the drivers for the video card. I've had problems in the past with video cards (many because I didn't check that the card I'm buying is "Linux friendly" or not. Now I'm doing my do diligence and asking the community what video card I should buy to replace my current one? I have the following Motherboard: [URL]
i am looking for recommendations for a usb video capture card. i basically want to take co-ax input coming from a cable digital converter box and save the content (mpeg, avi, mkv, ...).
Maybe this question is asked too many times but I need a fresh one. Which Video Card and Printer should I buy that its 100% compatible with Linux? Because I have ATI Raedon x700 and Lexmark printer.
I installed a video card called ASUS EAH 4550 and installed the ATI drivers necessary for this video card. The problem is this, I current have two users using Debian. I have done all the necessary configurations via x.org and User 1 has no problem accessing GNome with Compiz as the window manager. However, if user 2 was to log in the same way as user 1 (through startx) the screen does not boot up Gnome but instead the screen powers off into standby mode. I've also tried creating a third user and the same thing occurs.
Currently I am typing through User 1 with no problem but additional users for some reason can not get a desktop screen.
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
I've got: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller as vga screen, and I would like to be able to change brightness and contrast.
I am new here and I have tried checking similar threads as well as other sources in the net but could not get my card working. I use Debian squeeze on a P4 2.4MHz machine with 2 GB ram. lspci can detect all 8 chips but could not load the proper module since it could not identify the vendor. I have tried unloading the SAA7134 module and reloading repeatedly all possible cards from 1 to 174 by "modprobe -i SAA7134 card=#,#,#,#,#,#,#,# #-numbers 1 to 174 one a a time.
My computer is a Dell Dimension 2350 (all factory stuff inside besides RAM cards) with a Intel 845G (I'm almost positive but id have to check windows to see, Factory made also). how do i get my video drivers compatible wiith ubuntu? Oh and my ubuntu version is 10.04.Also does getting your graphics card to be read on ubuntu get you to use Visual Effects (None, Normal, Extra).. And is their a simple fix to the dispearring pointer in 10.04 ?
I have created several DVDs from my camcorder (sony handycam DCR-HC21 NTSC); however, the recordings are too long. I would like to capture smaller segments of these and load them online to share with family and friends.I would like to know what is the most recommended software for this task. I am running Ubuntu 9.10.I would have done this by using a firewire cable directly attached from the camcorder to my laptop, but my laptop has only USB ports. So I ended up creating DVDs using an stand alone Video Recordable DVD Drive.
How do I capture video from my JVC GR-DF470 MiniDV camera into 10.04 Lucid.PiViTi looks good for an editing app, and I've installed OpenShot as well, but neither have a way of capturing the video from a camera. I used Kino previously in 8.04 Hardy, but it was buggy at best in 9.10 Karmic; I've just installed it in 10.04, but capture keeps stopping after 2 or 3 seconds. I also tried kdenlive, but the audio capture has a lot of 'noise' that is louder than the voices on the tape, and once it finishes capturing video, it doesn't display a 'Save' dialogue as it is supposed to - so that wasn't very successful either.So what can I use to capture video from a MiniDV Camera via Firewire.
I am working in a script I have, to capture video with sound from my capture board, wich is a clone of the pico2000. This script was working in Ubuntu 9.10 untill I reformated my machine and instaled the Ubuntu 10.10, 64 bits. The machine is an AMD Athlon II, 2.6GHz with 3 GBytes of Ram. The former script was:
This is on Karmic Koala 9.10. The video displays fine via guvcview using a Logitech webcam. The trouble is the capturing of the video. With .AVI, I've tried different video formats (MPEG-4, flash, etc.) and none of them will play. The generated .avi file seems to grow with data, but the result is just unplayable -- it just hangs, thinking it's playing. Is there a troubleshooting page or something to figure out what the problem I'm having with guvcviewer is?
I'm using natty. is there any way to get a Pinnacle DVC 101 to capture video from composite source on Ubuntu Natty? it seems that when new releases break functionality they often are never fixed.
I'm also unaware of a simple GUI application to use in order to capture the video. It would need start and stop features.
I've no idea what the heck is going on with my TV capture card, i went to the other posts about my Hauppauge Inc. HDPVR-1250 model 1196 but it all didn't work i have the ubuntu-restricted extras installed but mythtv is not picking up the card. i'm running ubuntu karmic.
I have been trying to put together a mythbox for myself. I installed Ubuntu 10.10 and the newest version of the Mythbox backend. My capture card that I am having issues with is a Hauppauge Wintv-HVR-1850 card, I followed the instructions on installation from linuxtv.org and did not get any errors. I tried to set up Mythtv and it didn't get a signal and couldn't find any channels. I would like to know if my card is even working so I tried using xawtv but still could not get a signal from my card.
how I can verify that my card is installed correctly?
I got my UGA video adapter in, when purchasing it I saw on its requirements that is showed it had linux support. However, when plugged it in and restarting no image but the default green image was shown. All wires are check and are plugged in. However, I am not seeing on the computer monitor and no 2nd monitor is found on the monitor settings. Also I would like to note that according to a little research, is that the usb video adapter uses displaylink. I am using Ubuntu 11.04, classic ubuntu and 2D unity desktop.
I need an external usb sound card which is compatible with linux (opensuse 11.2). I would like to use it to connect my old 3.5 jack speakers and microphone.Do you have one that is able to play sound and record your voice (skype phone calls).
As a TOTAL noob to Linux setting up my ATI All-In-Wonder 2006 AGP card with GATOS to allow me to transfer old video tapes to my computer (for further editing to DVD). I have Ubuntu 9.10 loaded and the relevant link for the GATOS stuff is:[URL]..
I use Ubuntu 10.04 in my HP 6530s notebook(2.0 C2duo1GB RAM, 512MB video). Recently i downloaded GyachE v1.1.48 for yahoo video chat. after installing GyachE when i started webcam its showing errors: Fatal: Video format not supported by Grab device.
Anybody had any success in getting ffmpeg to work as advertised with video capture from a webcam? I really want to convert the webcam output to VP8 or H264, but apparently ffmpeg can't even capture the webcam with a video4linux device.
I wanted to share this nifty technique I came across for capturing video using the command line. The problem: I have a bunch of old VHS tapes (remember those...?) and need to get them digitized. I have a VCR, and a Dazzle Hollywood DV Bridge which captures video to DV over Firewire (IEEE1394). I first tried using Final Cut Pro, but it wouldn't capture, perhaps because it expects a controllable DV camera, and the Dazzle isn't a DVC device. I then tried my other favorite video editing app, Kdenlive, but it seemed to have the same problem.
I took a quick stab at the other common editors in the repositories (Kino, Openshot, etc.), but no luck with any of them. Then I remembered the dvgrab command, and gave that a shot and it worked, giving me a nice .dv file. However, DV makes pretty big files, which I wanted to compress down to something more manageable. Since I was going to be digitizing hours and hours of tapes, it would be great if I could compress while capturing. A little more googling and I had the answer - you can pipe dvgrab directly into ffmpeg! Here's the command:
the first part starts the capture, in DV1 format, and outputs it to a pipe file. usually you give dvgrab a filename, like
Code:
dvgrab -format dv1 capture.dv
the second part does the encoding:
-f dv: use DV format -i -: input from the pipe -b 2000k: video encoding bitrate of 2000k/sec, high quality -ab 512k: audio encoding bitrate -y: overwrite file if it exists
I didn't set the codec explicitly, for Quicktime it defaults to MPEG4. This worked great, capturing a 2-hour tape into a high-quality quicktime around 2GB. But I also wanted to be able to view the capture while it was going. Since I left the field monitors and audio splitters at the office, I had to figure out how to do this in software. Turns out that the "tee" command does exactly what I needed - the shell never ceases to amaze! Here's the full command:
Code:
dvgrab -format dv1 - | tee >(ffmpeg -f dv -i - -b 2000k -ab 512k output.mov) >(playdv --disable-audio --no-mmap)
tee uses the
Code:
>(command)
syntax to pipe simultaneously to multiple processes. The only thing that didn't work was audio playback, which was choppy and introduced errors in the capture file. I think a little tweaking with the capture rates could fix that.
Up untill this week I used to grab a streamed video from my root/tmp file. Video is nolonger streamed to this file. What has happened? and how can I grab streamed video?
I'm trying to capture video from my Sony DCR-HC21 video camera. I've managed to install Kino fine but was getting the error
aw 1394 kernel module not loaded or failure to read/write /dev/raw/1394 I could get it working by opening as root but then the files belong to root which I didn't want. So I did the following (as suggested in another thread:
chmod 777 /dev/raw1394
And now I get the error "No AV/C compliant cam connected or not switched on"
I've tried so many things ie [URL]
and as I'm a novice I'm reluctant to keep trying random things when I don't really know what its doing.
OK, it's back to the first error, is there anyway to run Kino and capture video without changing to root?
On my Windoze machine, I use Replay Media Catcher 4 which runs silently in the background and captures any videos (FLV, AVI, MPG, WMV, etc) on any websites that I happen to go to, and saves them to a folder on my hard drive. Right now, if I want to save a video that I'm wathing from Ubuntu, I have to go to /temp, guess which file it is, and copy it after it downloads fully but before it finishes playing, otherwise Firefox deletes it from /temp right away. This is a pain.
Yes, there are screen motion capture utilities in the Ubuntu Software Center, but they're just screen scrapers that result in low quality copies without any audio. I want something that will actually capture the video stream and save it as a file. Even if it doesn't save all videos automatically like RMC4, and I have to right click on the video to Save As, that would be better than copying it from /temp at the precise exact moment.
