Ubuntu Multimedia :: Best Video Card For H.264 And HDMI?
Jul 2, 2010
I'm looking to put a new video card in my desktop. I need one that will be able to handle H.264 at 1920x1080, and I would like to find one that can do HDMI with audio. Shopping for video cards, as I heard somewhere, is the kind of thing that makes you want to bang your head against a wall until you go blind, because then you won't need to worry about it any more... someone will be able to recommend a model, or at least a chipset or something, before I rip my own eyes out.
I currently use "MSI Radeon HD 3650 Graphics Card - ATi Radeon HD 3650 750MHz - 512MB GDDR3 SDRAM - PCI Express" that have no HDMI and some problems with Ubuntu. Due to the Ubuntu compatibility problems I decided to ask you guys for recommendations before upgrading to a new video card.The only "demand" is that the card must have dual HDMI outputs, one for the monitor and one for the TV.
I'm looking at upgrading my motherboard and graphics card. Ideally, I'd like to have 2 monitors running at once (DVI), and an output to an LCD projector (HDMI). If I can't have all 3 working at once, I'd like the 2 monitors on all the time (off the graphics card), and then switch from the monitors to the HDMI output so that only the projector is getting video.
So, If I get a motherboard with onboard HDMI, would it be possible to run the HDMI out at the same time as the graphics card output?
I intend to update my video card to allow the operation of all three of my monitors in a triple monitor configuration. I have a 790i motherboard with Nvidia chips, so I will most likely choose an Nvidia card for the upgrade. As I will need connections for three monitors, I will have to have two cards. It is my intention to have one large screen field spread across all three monitors. I assume the best way of doing this will be to use an SLI Bridge to link the two video cards. Thus the two video cards must be identical.
Question 01: Is this the best way of realizing a triple monitor setup?
While I am upgrading, I desire to also give the system the ability to play Blue-Ray High Def Movie one of the 1920x1200 monitors I will be using.
Question 02: What are the pitfalls of playing BD-Discs on Debian. I know I will be eventually acquiring a BD-Disc player (once the prices come down a bit more), but when shelling out for two video cards, I better think as far ahead as possible and get the two video cards that will do everything I can foresee them needing to do.
Question 03: As all of my monitors have HDMI input ports, I assume that I will need Video cards that have HDMI output ports to play full 1080P movies. Is this a valid assumption?
Question 04: Can anyone recommend a video card that does what I am wanting it to do? (This is to say Two Dual Link DVI connectors and an HDMI connector per video card with standard and high definition video playback capabilities). Keep in mind that I will most likely need to purchase two of them, to the Super Expensive Bleeding Edge cards are probably not going to be a practical option here.
Question 05: Is there a way that I can just play the BD-Discs with full resolution in a window on one of the three monitors I will have connected to the computer without having to go the HDMI route?
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Hardware: HP dv3505ea laptop Ubuntu: 10.04 LTS uname -a: Linux adventure 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 x86_64 GNU/Linux HDTV: Panasonic TX-L37D28BSA
I'm having trouble getting any output from my laptop's HDMI socket. I've had a search and can only find sound problems, mine is no visible output whatsoever.
Let me describe the setup: Laptop has a HDMI socket which I have never used before, HDTV has 4 HDMI inputs, I just bought a HDMI cable to connect the two to try it.
After connection I go to System->Preferences->Monitors and the TV is detected fine with the correct description and offers me 3 different resolutions. xrandr also works and gives me the same thing:
Code:
However none of the options display ANYTHING on the TV. The screen remains black, not even a flicker.
I have connected the laptop to the TV before using an analogue VGA (monitor) cable which worked in the same way with no problems.
Could this be an encryption/DRM/DVI problem? I have suspicions about the cable too because it is new and I haven't seen it work, but it wouldn't detect the correct TV description and resolutions would it? It was sold as an XBOX360/PS3 HDMI cable, is there a difference? It looks like a standard HDMI male-male cable.
Other things I've tried: Log off and log back on to restart the X server reboot
I've recently tried using my HDMI port on my Acer Timelinex 3820T. Audio works perfectly; video is another story altogether, however. I am able to see my mouse on my TV screen, and my top panel of my desktop is partially visible (it's cut out at the top). The icons on this panel respond to mouse kicks.
I have a Zotac MAG HD N01 desktop computer hooked up to my 40" LCD Samsung TV in the living room. On this machine, I have Ubuntu 9.10 minimal installed, and the system is configured using the XCI script (a customization script to configure the system as an HTPC with XBMC).
Now, since the original install, I've tweak it a little, and one of the things I have it doing is its booting into a minimal desktop using the NODM login manager and it goes into OpenBox. Everything works fine and dandy, however, when I leave it for a while, it looses its connection and says "Searching for Signal" on my TV. I can remedy the situation by just hitting a key on the keyboard (Ctrl for example).
This also happens if i'm watching, say a flash video in a web browser for a while (like a hockey game), and all of a sudden, the screen cuts out.I've checked in the openbox configuration, and screensaver is turned off, but I can't seem to find where to configure any sort of power management. Is there a way to turn off the, what I can only assume, is a power management feature?
I have a ASRock and Ubuntu 10.10. Everything worked fine till I had a short circuit. I started the computer, everything came up fine but the projector I have attached to the HDMI wasn't recognized anymore. I have a GeForce GT 425M and a Panasonic AE-2000 attached to it. The Xorg.0.log has following entries:
[ 12.838] (EE) NVIDIA(1): Unable to find available Display Devices for screen 1. [ 12.838] (EE) NVIDIA(1): No display devices found for this X screen
I have just installed kubuntu 10. My mobo is ASUS p7h55, which hastwo on board sound cards, one for stereo and the other for outputting sound through the hdmi link. When I connect my TV through HDMI, there is no sound. I go to Phonom, and there is only one card in the card selection box.I run aplay -l, and both cards are listed
I am trying to connect my desktop computer to my TV and I need some assistance with using audio over HDMI. I have an NVidia 580 GTX graphics card and I am on Ubuntu 10.04. I compiled and upgraded to newest alsa, so my HDMI audio shows up as one of the sound cards. I also read that I should manually unmute everything that shows up in alsamixer that is related with the NVidia card, and I did that as well. Unfortunately I still don't have any audio.. Here's the output of aplay:
Code: $ aplay -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=Intel HDA Intel, ALC1200 Analog Default Audio Device front:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog
I'm having a hard time with my hdmi output on my HP G60-128CA laptop to my HDTV.For now I'm getting video only with the Nvidia 173 driver no mater if I'm on 10.04 or 10.10. In the 2 cases, the sound is not passing. Let me add that all the options in sound preferences are available and all the speakers tests i did whit aplay worked ( no error messages), and no muted devices in alsamixer.In all my web searching one thing is strange to me: i didn't find a lot of problems regarding the hdmi display output whit the latest nvidia driver
but I had trouble trying to play an avi file on the bigscreen via my laptop's HDMI output.Although I could play the video in a full size box (with status bars and borders visible), both screens would go black when I double-clicked to go full size. This happened in both MPlayer and VLC as long as the HDMI cable was connected. Audio was fine.It presents as some sort off copyright protection, but I remember being able to watch movies fine in Maverick. Is anyone else having this problem with Natty?
I am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
The old Nvidia GT220 recently died in my HTPC and I replaced it with a new GT430. Sound over HDMI worked beautifully with the old card (after much trial & error,) but has now stopped working with the new card.Forgot to mention that everything appears to be unmuted in alsamixer. When I run "aplay -D plughw:1,3 /usr/share/ sounds/alsa/Front_Center.wav" I get no sound. I do however get sound from the headphone jack when I do the same command for the onboard sound card (0,0)
script which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog] Subdevices: 1/1
I have noticed that, using nvidia's latest drivers, HDMi output to my 32" LCD (1920x1080) and totem or vlc, the video on my LCD gets a bit "choppy" when the image changes faster.. some bars start appearing on the moving parts of the image.. like the system is having trouble rendering the video. This doesn't happen on my laptop screen even when both displays are running at the same time.
Also, this problem doesn't appear in windows 7, everything works perfectly there with one odd thing... the picture gets "choppy" on the laptop screen when I'm running both at the same time. It's not that noticeable, but I can tell the difference between windows and ubuntu in quality and it's annoying me
I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
I've had a look and can't find this particular problem on the boards (feel free to correct me if there is something useful already though). I've recently got a Sony HDTV, and have hooked it up via HDMI to an Nvidia GeForce graphics card. Surprisingly enough, I'd like to watch movies/TV this way. However I'm experiencing flickery horizontal white lines on the desktop, and horizontal lines through video. I generally use VLC to play stuff, and have the 805 Nvidia proprietary driver installed.
So far I've tried: Changing the resolution and refresh rate (Including the native TV ones) Using Twinview, Separate X Screen and unplugging my monitor altogether. Uninstalling the Nvidia Drivers and using the standard ones Re-Installing the Nvidia Drivers Xine Player Changing video output of VLC to X11 Using Force scaling (I think, it's a tv-specific setting to compensate for differences in native resolution) Switching desktop effects on and off
In short, it doesn't seem to be an issue with drivers, resolution, refresh rate, video files, codecs or players. How to stop these flickery lines as I wouldn't like to have to give up on the OS over one problem.
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time. Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard. I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
I'm working right now with a newly installed Lucid 64-bit. Everything it's fine, but I would like to use the dual monitor for my work, and so I decided to ask to buy me a video card, since what I have now is an onboard graphic that doesn't allow me to do it. I don't need to play games (well I don't think my boss will be happy about it ), and I would rather go for a not expensive solution. But I have some doubts regarding the compatibility with my linux. I found several things on the web, but nothing regarding the video cards that I individuated. If the card is auto detected, it would be better of course.
The cards I was interested are:
ASUS RADEON HD4350 1GB DDR2 SAPPHIRE RADEON HD5450 512MB DDR3
But then i've seen on the web you might have problems with ATI in linux and so I went looking also for Nvidia which I found is generally better implemented under linux: ASUS GEFORCE GT 210 512MB DDR2
PALIT GEFORCE GT 220 SUPER 512MB DDR2 I don't have many models among which to choose, because of some conventions at my workplace. The tables of compatibility with ubuntu that I found are all related with much more expensive models, or models that I don't have in my lists. Could somebody tell me if one (or more) of the cards mentioned above work under ubuntu 10.6 64-bit? I have a Hewlett Packard system with:
HP 3674h motherboard Intel core2 duo 3.16 GHz 8Gb RAM 250 HD
im having a lot of issues with my video card, i can't install it correctly i get low graphics mode and some times a black screen..login+password i had read a lot of post, installed ubuntu a few times, done a lot of stuff but i can't get it, im a noob, using ubuntu for a week now and i love it.
