Ubuntu Multimedia :: Realtek ALC 883 Soundcard Recognized But No Sound
May 28, 2010
I have an MSI S420 with a realtek alc883 onboard. I upgraded from ubutu 8.04 to 10.4 recently, The sound worked in 8.04 although the mic did't work and the same thing in 8.10 (i went through all upgrades) it stopped working at all in 9.04 onwards.
If i did Lspci -v it did say the name of my card, ( I unmuted all in alsamixer and got the codecs but even a test soud won't work) I also dowloaded a driver from Realtek itself, that didn't work.
Then I edited alsabace.conf some more. I tried every one that could possily be it at [URL] including all that said MSI.
I then tried Lordraidens comprehensive sound guide from step 1 to step 5, I used the module-assistant and istalled a driver that was called "hda-realtek-codec" or so. It was the only appropriate one on the list.
I also run into someoe with thesame problem. [URL]
i think ill give up and use the 8.10 that is still on a other partition
Till around three hours back, sound was there. After restarting the computer, there was no sound. I checked the sound pref. Nothing was mute. The sound icon showed:
my onboard soundcard (hda-intel ALC662) is not recognized in my new computer. It works fine with other distros, but ubuntu just does not seem to find it:
cat /proc/asound/cards --- no soundcards --- lspci -vvnn:
I was, untill very recently, using ubuntu 10.10, and have just upgraded. In Ubuntu 10.10, I was easily able to record sound from my sound card in audacity. For whatever reason, since upgrading I have been unable to do so. I have no problem recording sound from my laptop's microphone, but can't seem to find an option to record from the sound card. I believe it's the same version of Audacity, so all I can assume is that it's an Ubuntu issue.
I'm having a bit of a furball trying to change a soundcard. I took out an Audigy card. KDE detected the removal of the old card and asked me if I wanted to remove the drivers. I said yes. I went into the bios and enabled the onboard sound. Now I've got no sound so I guess I've got some configuration to do. So far:
I have had on and off problems with my sound for quite some time now. Each time it would stop working, I would find a fix which would work for a month or so, then I would go back to having no sound. I have had consistent sound on my Windows partition, so I don't think something is wrong with the hardware. The first fix I used was using "sudo alsa force-reload" to get ALSA working again. The latest fix I used was to add the line "options snd-hda-intel model=toshiba" to alsa-base.conf, which worked up until now. My built-in computer speakers won't make any sound, nor will my external monitors when they are plugged into the headphone jack. I do get sound when I plug in a pair of USB headphones.
I have tried using the Comprehensive Sound Problem Solution Guide [url], but I run into a predicament...
aplay -l (with or without being root) gives...
Code:
Code:
Alsamixer isn't much help either. It shows the name of my card in the top left, but there are no sliders to adjust.
I've tried compiling the modules from source, reinstalling through Synaptic, and plenty of other things, to no avail. Ubuntu 10.04 on a Toshiba Satellite U305-S5107
Alright, just installed maverick, got the sound to work great on the 7.1 with pulseaudio. works great in movies, and everything else just wonderfully. the only thing i am stumped by is how to get the sound to loop from my digital input on my soundcard to my analog speakers also on the same soundcard. i know the sound feed works on the input as the makeshift VU meter/bar on my digital input in the sound preferences moves, but i can't get the sound to actually come through on my speakers.
I have an X-Station 25 synth, which has worked fine in the past on Ubuntu. Recently made a fresh install on Xubuntu, and for whatever reason, I'm getting no sound coming out when I just select USB audio.If I go into Sound Preferences, I can see the device. I can even select it for sound input. Hell, if I press some keys on the keyboard, I can see some of the squares on the input level go green.Evidently, there IS sound coming in via the USB connection, and Audacity is capable of recording it.
However, the only way of hearing it is by putting headphones directly into the unit and listening to the monitor output signal. The audio coming in, as detected, is not being played from my laptop speakers/headphones.Am I just missing something here, and that's MEANT to be the only way to hear the audio out?In alsamixer, there are no controls for the Xstation, and nothing seems to be muted. I've upgraded the firmware to the most recent version as well.
I updated my Slackware installation to 13.37 today. I was running current (a few weeks old).
I recently bought a new set of 2.1 speakers, so i thought of re-running alsaconf and then alsamixer.
Thats when i got this strange error:
Code:
These are the contents of my /etc/modprobe.d/sound.conf
Code:
Here is the output of lspci and dmesg:
lspci:
Code:
dmesg:
Code:
Ok...The funny thing is, the sound still works! (Alsamixer shows all the 6 channels of my previous 5.1 speaker system).
Additional Info:
*Am using a customized kernel - version 2.6.39-rc5. **It does not work in the default Kernel 2.6.37.6, not even in 2.6.38. *** It works in kernel version 2.6.35.x and 2.6.36.x. (I checked!)
Well I installed Ubuntu 10.10 64Bit along side Windows 7, and I've been unable to get any sounds working, apart from the log on sound. So I tried installing some drivers, and now there is no sound at all, and no sound devices show up in System-Preferences-Sound-hardware
I'm using the on board HD Audio (ALC 889A) and using the optical Audio out for 5.1 Surround sound.
I've tried just using the Stereo ( Green Jack ) out, and still nothing. The suggestions on the on the Ubuntu site, and the following post didn't seem to work either.
[url]
I Can't find a great deal of posts with the Realtek HD audio.
I have just installed a Xonar dg onto Ubuntu10.10The MBoard is also Asus with a built in card that works ok. The AlSA site says it may work (although no drivers for this are specific) as it uses a CM 18786 chip & I believe snd-cmipci contains the driver for this.My motherboard has its own driver built in, I can turn this of in the BIOS.Is their an easy install/driver option with Ubuntu 10.10?
I'm running Ubuntu 9.10, but so far I've been unable to get sound to work. I know my sound card is Realtek, because I've had to install the HD Audio Codec Driver when I was on Windows. I downloaded the driver for Linux and it is currently sitting in my home folder. When I tried to Code:sudo ./installthe driver, it failed for the following reason:
Code: WARNING!!! The mixer channels for the ALSA driver are muted by default!!! **************************************************************************
I was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
I can't get any sound to come out of my laptop through Kubuntu. Please help me by giving me step by step instructions, because I'm a total noob at such things. I've went through the Comprehensive guide as well -to no avail. to sum it up:
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code: Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux Code: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
I tried to install the latest RealTek driver for Linux and it has wiped all my devices. I've tried reinstalling the alsa-base packages but it hasn't worked
I have no HDMI sound for my ASUS ENGT 240 gard. I've used the recommended driver 10.04 offered and currently using the one right from [URL] for 10.04 64 bit. Don't know how to get the boxes around code, but here's what I have for aplay -l, aplay -L, and lspci.
aplay -l **** List of PLAYBACK Hardware Devices **** aplay -L pulse Playback/recording through the PulseAudio sound server
Sound used to work fine on my computer, but one day my headphone jack stopped working -- when I tried to use it, no sound played through the headphones but did play through the computer's speakers.After I tried to fix it, I lost ALL sound on my computer. I noticed in my sound preferences it says "Dummy Output" and no other hardware.The problem seems common -- I've Googled the issue to death and read many threads here about the same problem -- but no matter how many times I've tried, I can't find a solution that works for me.I'm relatively new to Ubuntu and so there's still a great deal of stuff that
I recently upgraded to Ubuntu 11.04 (natty-64 bit) and my wireless PCI card is not being recognised by default. Previously, when I upgraded to 10.10 I had to go to the Realtek website, download the driver for RTL8185 and install it (following instructions in the readme file) to get my wireless card recognised and working properly. This time around, that approach doesn't seem to work. When I try to install it using "make" I get the following error:
make: *** /lib/modules/2.6.38-8-generic-pae/build: No such file or directory. Stop. make: *** [all] Error 2
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
I bought a Toshiba A500 two days ago (was in a rush, my old A200 had a catastrophic failure) and the wireless doesn't work. I have two network related devices listed with lspci:
To my question: I found this article (HOWTO: Xplora E16 Ubuntu 9.04 32Bit and 64Bit with wired and wireless networking - Novatech Community Forums), which seems be consistent with my situation (wired connection works, wifi doesn't and my kernel is 2.6.31). I ran the installation and it appears it worked...BUT, is this going to create major problems down the line (kernel upgrades, etc.?)
Installed Ubuntu today but i cannot get any sound from my pci soundcard the only sound i get is through the inbuilt sound in my motherbaord. Is there a way I can get linux to play sound through the soundcard instead? I have looked for driversasus xonar) but there appears to be no such thing for linux.
Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code: [root@donnie rtl8712]# make all make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
Recently I installed a new soundcard to my computer, and I don't have any sound anymore in Linux. Now I have in YaST two sound chips, one AC97 and my soundcard Asus Xonar Essence STX. Obviously Linux detected my soundcard since the custom driver called "Virtuoso" is there. However, my soundchip has still the slot 0, and my soundcard is not configured yet. And here I'm stuck, because:
1. when I tried to delete the AC97 entry, YaST hangs (actually y2base or something like that, the sound subprogram). Alternatively, I tried to just disable the driver, but this wasn't possible (unlike with Windows, where you just click a checkbox).
2. when I tried to configure my new soundcard, the configuration program got stuck again - with every of the three alternatives (fast setup, normal setup and custom setup or so).
I also tried whether the old soundchip is still working, plugging in my headphone into the output of the AC97 soundchip, but I didn't hear anything, so system sound really seems to be broken.
