is there a way to make it work with .ape files? i try to open ape files and it will open instead a prompt window in songbird asking which program to open the file with.
View 3 RepliesHas anyone gotten Songbird to play m4a files in Slackware? Is so, 'fess up! Songbird forums say this is possible in Linux with the right codec yet most in the forums, including me, fail. (There's also a plugin that doesn't work in linux.) All my other players handle m4a fine in Slackware 13, so I know I've got the proper codec.
View 7 Replies View RelatedMy Rythmbox and SongBird when I click a mp3 the fan goes into over drive and the mp3 song play timer goes up in three's and doesn't play any audio. But I can play the mp3 files in Audacious.
I have gstreamer installed and I can do gstreamer-properties and its setup right for alsa. Whats going on with Songbird and Rythmbox?
Has songbird officially dropped support for the Linux dist of songbird??
View 1 Replies View RelatedHow can I get mplayer to play files over the network? It seems like I am not the only one that wants this feature. Does anyone got a work around for this?
View 9 Replies View RelatedAfter many days of trying to tweak Ubuntu 9.10 desktop i386. This subject will focus on my dvd drive. ...Here is what I have done, but I'm not sure what I did or still need to do, or to do different. ...
Basically the problem is, I can't play store bought DVDs, but I can play my copies of them.
When using MDPlayer that I added to Ubuntu, I can play the copies of my store bought DVDs, but not the originals. However, when using Ubuntu 9.10's movie player, it wont do anything and I'll have to do a force quit to close it.
I learned that this may because there is a repository of packages that cannot be included into the Ubuntu distribution, as I'm sure you already knew.
...Yet, Most people have worked around these issues.
I came across the Medibuntu site: [url]
Running the Terminal, I added the bash command that adds Medibuntu's repositiry to Ubuntu. It also adds Medibuntu's GPG key to the keyring.
(The sudo wget - etc etc etc --quiet update)
Then I jumped down to the... "This command should be run in the Terminal, after adding the repository:" ...And did that. (sudo sed -e 's/ etc etc etc /medibuntu.list)
I'm install songbird from here :[URL].. I install this version because the latest version is so purple.everything is OK except the fact that I cant play my whole song in the library nor playlist, only able to play back & forth current song and the next one. I'm already try the new version though.. the problem stay.
View 9 Replies View RelatedI need to play or preferably convert (i.e. to MP3) old SNG files, which contain voice records. From what I could find, it's basically a MIDI created by synthetiser. I think it was recorded by some ancient VLC player. I failed so far to play it on anything I could download.
View 4 Replies View RelatedWhenever I plug my Zune in, Rhythmbox recognizes all the songs on it but when I doubleclick on a song to play it, the song doesn't play and Rhythmbox quits. Any suggestions on how to fix it? I'm running a Dell XPS 410 with 4GB RAM and a 1.75 GHz processor.Also, I imported a CD and it plays fine.
View 1 Replies View RelatedI just installed 11.4 and its working like a dream, only I cant seem to play .avi files. does anyone know a solution for this?
View 8 Replies View RelatedTo get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
I have tried to play mp3 files with sox play.
The result I get is:
play FAIL formats: no handler for file extension `mp3'
I have installed all libsox packages I could find, including libsox-fmt-mp3 and libmad0.
sox -h though, gives me:
AUDIO FILE FORMATS: 8svx aif aifc aiff aiffc al amb amr-nb amr-wb anb au avi avr awb cdda cdr cvs cvsd cvu dat dvms f32 f4 f64 f8 ffmpeg flac fssd gsm gsrt hcom htk ima ircam la lpc lpc10 lu m4a m4b maud mp4 mpg nist ogg prc raw s1 s16 s2 s24 s3 s32 s4 s8 sb sds sf sl sln smp snd sndfile sndr sndt sou sox sph sw txw u1 u16 u2 u24 u3 u32 u4 u8 ub ul uw vms voc vorbis vox wav wavpcm wmv wv wve xa
PLAYLIST FORMATS: m3u pls
AUDIO DEVICE DRIVERS: alsa ao oss ossdsp pulseaudio
(no mp3 mentioned there).
The reason I try to play mp3 files with sox is that I wanted to play a playlist with different formats and feed it to ices2 through a pipe, ie :
sox Musik/storlista.pls -t raw - | ices2 ices-pcm.xml sox
FAIL formats: no handler for file extension `mp3'
Fedora Core 11 and installed songbird via songbird wiki website.I want to play mp3 files with songbird (which is basically why i downloaded it cos i dont like amarok) but when i try to play a file, it gives this message:"MediaCore Error: An id3 tag demuxer plugin is required to play this stream, but not installed"i searched a lot on web but couldnt find a solution
View 14 Replies View RelatedSurprisingly, VLC doesn't play shockwave files. Can anyone recommend a shockwave player for Linux?
View 5 Replies View RelatedI have installed Amarok on clean Ubuntu 9.10 and when I tried to play some mp3 files it just skip them all and finish the play list. I don't know how to fix this, maybe I need something to be installed. On other programs the files works fine. I have some Intel efault sound card.
View 1 Replies View Relatedi tried to play any kind of video, it doesn't matter what it is and when i double click it to play, the program acts like it's loading it and then disappears. it doesn't matter what program it is, it does the same thing. i'm using ubuntu 9.10. is their anything i can do about that?
View 4 Replies View RelatedBut audio from DVD is working. May be set other output video driver? I'm gonna watch Kung Fu Panda Ubuntu 10.10 with Xfce4.
View 1 Replies View Relatedready some 3gp files so had to install the w32codecs and mplayer version from the medibuntu repository. Now I can play back these files perfectly with mplayer from teh command line but when I open them with smplayer there is no video, just (choppy) sound. Xine also plays them back now although it didn't before. I know the first time I ran smplayer on this installation I had to choose which version of mplayer it was running with but don't know if I can do this again to tell it to use the installed medibuntu mplayer. I'm at a bit of a loss as to why the front-end smplayer would not simply play files with the exact same results as mplayer from the CLI. I haven't rebooted since,
View 9 Replies View RelatedError: GStreamer error: Internal GStreamer error: negotiation problem. Please file a bug at url. Additional information: gsturidecodebin.c(1563): setup_source (): /GstPlayBin2layer/GstURIDecodeBin:uridecodebin0:
Can't link source to decoder element
i get this error when i look in the error console
When I used Hulu Desktop on my old integrated VGA video output, it played fairly well. Now I got a new video card and connected my monitor and installed the latest drivers and it doesn't play as well, it buffers and I don't know how to explain the rest.
View 9 Replies View RelatedI run lucid. I already have installed Medibuntu and the package libdvdcss2. Nevertheless, I still can't get DragonPlayer to play a DVD properly. Indeed, Dragon starts to play the DVD. However, the image is distorted and you can't recognize anything... This is what the terminal messages say when I start Dragon over the terminal:
Code:
norma@norma:~$ dragon --play-dvd /media/cdrom0/
dragonplayer(2265)/kdeui (kdelibs): Attempt to use QAction "aspect_ratio_menu" with KXMLGUIFactory!
dragonplayer(2265)/kdeui (kdelibs): Attempt to use QAction "audio_channels_menu" with KXMLGUIFactory!
dragonplayer(2265)/kdeui (kdelibs): Attempt to use QAction "subtitle_channels_menu" with KXMLGUIFactory!
libdvdnav: Using dvdnav version 1.1.17 from http://xine.sf.net
[Code].....
i installed ubuntu 10.04 on my desktop pc. I previously used 8.10 without any problems. Now I have a problem with amarok. I can't play any music at all. i tried to find what the problem was but i don't seem to succeed so far.
View 1 Replies View RelatedI installed the adobe plugin, and my browser crashes. I uninstalled it, and installed the one in the apt repository (mozilla-plugin-gnash) and it shows up in my about: plugins in iceweasel, but flash just doesn't play.
View 4 Replies View RelatedAmarok just skips all songs one by one. It starts playing and ends song immediately and goes to next song.I ran Amarok in konsole..[URL].. I tried different audio files (mp3, wav...) but the same every time.
View 2 Replies View RelatedI see that whenever I try and run a video, the system defaults to try and run it in Banshee.Banshee, though, sits there with a black screen and the information on what it is supposed to be playing. Clicking the Play button does nothing. This includes OGG (OGV?) video files.Does anybody use this feature in Banshee and got it to work?
View 1 Replies View RelatedI just upgraded (full reinstall inc. format) from 11.1 (32bit) to 11.3 (64bit).
Everything is working correctly except gmplayer (installed from packman).
If I play movies using gmplayer they do not play smoothly, but the strange thing is if I play the same file with mplayer from a terminal it does play smoothly.
If I play the file from a terminal with gmplayer no errors are reported...
I was wondering if you could help me out with this Flash problem: sometimes, Flash elements don't play in my browser window - there's just a big white area where my Flash should be. I have to close and re-open Firefox. This especially happens when I activate the "Flashblock" plugin, a very useful tool that blocks all Flash unless you click on it and choose to play it. Whenever I have that enabled, most of the time, clicking on the "play" button produces the white area where the Flash object should be. It's Karmic 64 and Firefox 3.5, Shockwave Flash 10.0.
View 2 Replies View RelatedI have a PC running Windows 7 Ultimate 64-bit. I have about 50GB of music in the Music library. I can connect from, play to, and download music to my DLNA enabled phone (Samsung Galaxy S), everything works fine.
When I start Rhythmbox on my laptop (Ubuntu 10.10), it sees my PC (appears under "Shared" in the left panel), but the tracks won't show on the list, it seems as if it fails to retreive the list of media. No matter how long I wait, nothing happens, the tracklist remains empty forever.
I have installed the "coherence" plugin from the Software Center.
I'll attach the console output rhythmbox generates when starting up,
Sidenote: it works the other way around, I can "Play to..." Rhythmbox from Windows Media Player.
Code:
andras@ANDRAS-LAPTOP:~$ rhythmbox
(rhythmbox:1979): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
WARN coherence Dec 13 17:04:36 Coherence UPnP framework version 0.6.6.2 starting... (coherence/base.py:283)
WARN webserver Dec 13 17:04:36 WebServer on port 39537 ready (coherence/base.py:124)
WARN rb_coherence_plugin Dec 13 17:04:36 Media Store available with UUID
[Code]....
I'm well aware of Songbird no longer being supported for Linux but I know there is .deb package out there somewhere. Hopefully in the latest release for Linux as well. 've searched but have found nothing. The thing is, I can't find anything 'I like' other than Songbird. It's such a shame its no longer supported.
View 7 Replies View RelatedI know, Songbird does not currently support Linux... I got the x64 .deb file off this website (http://skyzim.com/songbird-1-4-3-installer/) and installed it without issue. I got it up and running then screwed something up with the graphics and needed to reinstall. Now when I get the same file off the website, install it, then try to run I get an error "GLib-ERROR **: /build/buildd/glib2.0-2.24.1/glib/gmem.c:157: failed to allocate 14145530384 bytes". I tried doing a sudo apt-get remove libvisual-0.4-plugins as was recommended elsewhere to no avail. Anyone know how to get songbird up and running again? I did a "Removal" through synaptic to uninstall the first time, perhaps that is an issue?
View 1 Replies View Related