Error: GStreamer error: Internal GStreamer error: negotiation problem. Please file a bug at url. Additional information: gsturidecodebin.c(1563): setup_source (): /GstPlayBin2layer/GstURIDecodeBin:uridecodebin0:
Can't link source to decoder element
i get this error when i look in the error console
My Rythmbox and SongBird when I click a mp3 the fan goes into over drive and the mp3 song play timer goes up in three's and doesn't play any audio. But I can play the mp3 files in Audacious.
I have gstreamer installed and I can do gstreamer-properties and its setup right for alsa. Whats going on with Songbird and Rythmbox?
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
I changed the backend of phonon from xine to gstreamer because I wasn't able to play .avi files with xine. I installed libxine1, and libxine1-codecs, but Kaffeine, Dragon Player and Gwenview crashed when trying to play an avi file. After changing the backend I was able to play .avi files, but now I can't play DVD's, which I'm able to do switching back to the xine backend.
how to play dvd's with the gstreamer backend
Hello. I use dvd::rip 0.98.10 to create .wav sound files from DVDs and then play them in Totem Movie Player 2.28.2 (using GStreamer 0.10.25) mainly because I like the visualizations. It always used to work, but a recent batch will not play. I get: GStreamer encountered a general stream error. I probably used a more recent version of dvd::rip for the ones which don't play. Both MPlayer and VLC Media player plays them without a problem and older rips play fine in Totem too. The Audio/Video properties of a 'faulty' file (as shown in Nautilus) are greyed out for codec, channels etc., whereas a 'good' file shows Audio properties as Uncompressed 16-bit PCM audio etc., but running soxi on a good or bad file gives the same (good) results. I'd like to get this working, without doing anything to the .wavs preferably, so I guess I need to do something to Gstreamer, but I'm really not sure how to proceed. I'm using Linux Mint 8 64bit (rt kernel) and very nice it is too.
View 1 Replies View RelatedI want to play a raw file with gst-launch option
I had use some example from the man page but not worked.
I just reinstalled slackware on my computer so that I could have the 64 bit version and take advantage of all the ram in this machine. Anyway I did a brand new install Slackware64 13.1 from the dvd. I omitted the KDE packages and instead installed Gnome via the GSB project. After all that installed with seemingly no problem I opened up Rhythmbox and imported all my music, but it won't play any of my m4a files. A little research showed that installing gst-plugins-bad would solve this. So I downloaded it and built it from source, no problems in the configuring it or making it. But the problem persists. Here's a list from slapt-get search for gst showing the gstreamer packages that are installed...
gst-ffmpeg-0.10.10-x86_64-2gsb [inst=yes]: gst-ffmpeg (GStreamer "ffmpeg" Plugins)
gst-plugins-bad-0.10.19-x86_64-1_SBo [inst=yes]: gst-plugins-bad (a set GStreamer plugins)
gst-plugins-base-0.10.29-x86_64-1 [inst=yes]: gst-plugins-base (base set of GStreamer plugins)
gst-plugins-good-0.10.22-x86_64-1 [inst=yes]: gst-plugins-good (good set of GStreamer plugins)
gst-python-0.10.18-x86_64-1gsb [inst=yes]: gst-python (GStreamer Bindings for Python)
gstreamer-0.10.29-x86_64-1 [inst=yes]: GStreamer (streaming multimedia framework)
When system is playing a media ( e.g. sth.mp3 ) by a media player like Totem, then I open a browser and forward to a page that should play sounds, but everything is pretty normal except the sounds ( I mean there's no sound ).
When firstly open a browser to surf the pages. If there's sound played in the browser, I can't play a audio media in a standalone player ( e.g. Totem ) before I close the browser. But If there isn't any sound played in browser, the outside player will work normally.
The 2 situations happens between no matter Chrome or Firefox and a outside player. I guess there maybe a conflict between gstreamer and adobe flash player. But I am not sure what happened in my system.
Anyone else experiencing this problem?
I am on Kubuntu Natty 11.04 64 bit.
I try to play some internet streams but when gstreamer is used as the phonon backend, Amarok never plays them. With Xine or VLC backend looks like I have no problems...
Exactly below you can find two of the streams I am trying.
mms://a1251.l4434923250.c44349.g.lm.akamaistream.net/D/1251/44349/v0001/reflector:23250
mms://best.live24.gr/best1222?MSWMExt=.asf
since I had to re-install Slackware 13.1 on my netbook and I have now build Clementine on it. I can hear webstreams on my main machine, also running Slackware 13.1 and Clementine 0.5.When I try to play a stream I get this error message in the console:Quote:Couldn't create gstreamer source element for <streamURL>
View 3 Replies View RelatedI installed gstreamer from sources 10.0.30 When i tried to test it as in the README, i got this error message
[Code]...
i have installed xchat but when i connect to ubuntu server and try to chat gstreamer chat room i get : #gstreamer :Cannot send to channei tried to google but dint find any solution
View 1 Replies View RelatedI'm using KDE and after some update GStreamer seems to be broken. Firstly it was unable to play sound at all, and I've got around this by changing Phonon preferred engine to Xine. But Clementine is still unable to play with error message:
Clementine Error
GStreamer could not create the element: volume. Please make sure that you have installed all necessary GStreamer plugins (e.g. OGG and MP3)
I've already read this and this topic, but none of the things, proposed to try, worked for me.
I've been trying to get soundconverter to work on ubuntu 10.10, I've checked I've got all the restricted packages installed, gone into synaptic and installed a bunch of gstreamer stuff, downloaded and compiled the latest version of soundconverter but whatever I do, the following happens:
1. open soundconverter
2. open file (wav)
3. set to convert to mp3 (default)
4. Click convert and instantly get the ever so helpful "general stream error" message!
I have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
I have a couple of audio problems that are bugging me.
The first one:
I have two backends for phonon: Xine and Gstreamer. :
Xine has the following devices listed:
And GStreamer has the following:
Almost everything works good with Gstreamer except that I cannot skip through song length in amarok (cannot do Fast forward or rewind). I have some long songs (non-stop remixes) and I want to play at different positions. If I select Xine backend, skipping works, but I get a new problem. The PCM slider (which I use as the main slider to work for both Master and LFE (subwoofer) I have) won't work. It won't respond to PCM slider. and The master channel works only if I lower the volume all the way to a little value (around 5%-10%). From withing amarok. If I don't use PCM slider, I cannot lower or raise the volume with one slider. I have to do it manually for both LFE and Master. (See the working sliders below):
Second problem.
My kmix will show these sliders everytime my computer boots.and everytime it works. Working sliders: But each time I "logout" and log back in, I get these sliders instead. I tried creating a new user, but the problem persists. And the problem is that I do not get any sound at all, regardless of sliding every single sliders all the way up.
not_working sliders (which I get ONLY but everytime I logout and log in):
Here is my alsa-info: [URL]
This file (and a couple others) are missing from packman ATM.I've seen them (need version 0.10.30 or greater) at multimedia:/libs.My doubt is, does these gstreamer packages housed at download.opensuse.org are limited due to DCMA/patent issues, like OOTB k3b/libxine are
View 7 Replies View RelatedI just installed Rhythmbox and the gstreamer fluendo package for mp3 support. But i am confused which package I should install to have AAC support. I am running OpenSuSE 11.3 64bits with LXDE
View 6 Replies View RelatedRecently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
I've just made the move to openSUSE* and after the installer seemed to bork my xorg.conf because of my Wacom tablet things have been going quite smoothly. My only problem at the moment is that MP3 playback through Exaile, Banshee or Totem stutters and pauses several times per track or more. The only commonality I can see is GStreamer, but nothing is giving me errors to the console.
Code:
rpm --query --queryformat '%{NAME}-%{VERSION}-%{RELEASE}-%{ARCH} -> %{VENDOR}
' gstreamer-0_10-ffmpeg gstreamer-0_10-fluendo-mp3 gstreamer-0_10-fluendo-mpegdemux gstreamer-0_10-fluendo-mpegmux gstreamer-0_10-plugins-bad gstreamer-0_10-plugins-base gstreamer-0_10-plugins-good gstreamer-0_10-plugins-good-extra gstreamer-0_10-plugins-ugly
[Code].....
* I ditched Fedora to get better Monodevelop support after using Redhat 7.3 and 9 followed by FC 3 and 6 then Fedora 7, 8, 9 and 10. The Ubuntu forums seemed to keep giving me occasional answers to questions, but the Suse build service gave me the RPMs, when the requirements matched.
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
now VLC is back again in Packman repos, but ... now I've got this issue:
Code:
#### YaST2 conflicts list - generated 2011-05-13 07:58:10 ####
patch:gstreamer-0_10-plugin-hal-4496.noarch conflicts with gstreamer-0_10-plugins-good-lang.noarch < 0.10.28-1.2.1 provided by gstreamer-0_10-plugins-good-lang-0.10.28-1.pm.40.3.noarch
[code]....
is it safe to apply this patch through "vendor change", but immediately after redo "switch system packages to packman"?
I've been using OpenSUSE 11.4 with GNOME for quite a while now and so far I've been a happy camper. This morning I decided to try GNOME 3 and the install went smoothly, with the only exception of rhytmbox(my music player of choice) not being available.Later I found rhythmbox for GNOME 3 in this repo: Index of /repositories/ GNOME:/ Apps/openSUSE_11.4+GNOME_STABLE_3.0.It works well but the Cover Art plugin won't load because it fails to import python-gstreamer.Should I report a bug against OpenSUSE 11.4 or maybe I am doing something wrong?
View 1 Replies View Relatedinstalled radio tray. entered url for radio station but getting error. "your gstreamer installation is missing a plug-in." How do I find out which plug-in?
View 4 Replies View RelatedWhen I try to use Rythmbox, I got a message error saying that your "GStreamer installation is missing a plugin" and it says that is ID3 tag demuxer I already have this streamer plugins installed, so I don't know which one is missing
[Code]...
I'm install songbird from here :[URL].. I install this version because the latest version is so purple.everything is OK except the fact that I cant play my whole song in the library nor playlist, only able to play back & forth current song and the next one. I'm already try the new version though.. the problem stay.
View 9 Replies View RelatedFedora Core 11 and installed songbird via songbird wiki website.I want to play mp3 files with songbird (which is basically why i downloaded it cos i dont like amarok) but when i try to play a file, it gives this message:"MediaCore Error: An id3 tag demuxer plugin is required to play this stream, but not installed"i searched a lot on web but couldnt find a solution
View 14 Replies View RelatedI just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.
It also says
Code:
The following plugin is required : MPEG-4 AAC decoder
Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?
basically what i'm trying to do is get sound from flash videos on videos. my plan is to use gnash to play flash files within firefox. since gnash uses gstreamer to output audio and since i'm using jack for playback, i need to somehow route gstreamer to jack. does anyone know how to do that? here is an ubuntu thread that may help, but i'm not sure how to translate that to fedora. i'm already able to hear the sine tone from running:
code:
gst-launch audiotestsrc ! audioconvert ! audioresample ! jackaudiosink
in the console. i just don't know what to do next.
how to disable gstreamer???? (and be able to re-enable it also?) i don't want to totally remove gstreamer - as it is required by alot of software. however, when i am using
proaudio apps with low-latency having gstreamer enabled is a problem. this is because ( i think ) that my crappy intel-hda (STAC9200) only has one sub-device, while many other cards have multiple.
so when gstreamer is there, i will get more xruns, and a nasty message in dmesg, something along the lines of "intel-hda switching to polling mode". overall performance of the card will suck. BUT! if gstreamer is NOT there, i can run low-latency(2ms) with pretty much no xruns(jackd). the only time i get the odd one is if i am switching drum banks in a wine VST.
well, i remove pulseaudio when i install Fedora, gstreamer doesn't work properly after that, you can't use rhythmbox, or anything. but you will get much better latencies and generally the card is very useful. ie: i can manipulate many sounds/samples/synths in realtime, or actually record in ardour with a decent load...