when watching a movie in browser (ff/chrome) or using mplayer to replace flash on ..... for instance, i cannot skip around the video i'm watching...
- is there a way to be able to skip forward/backwards with mplayer?
- is there a way to replace mplayer with another program that will allow me to skip?
I am "fleshing out" my USB flash drive Netbook Remix of Ubuntu and have run into a snag on getting Mplayer Movie Encoder to work. Synaptics eventually showed 28 new packages will be installed which was done. But, the skin showing the "controls" (fast forward, pause etc) is dead. I am using the USB flash on a HP desktop and all other Remix features work well. Plus the Nvidea gui card fills my 19" flat screen exquisitely well. And, the stick works very nicely on my Acer Netbook (aspire one 250) too.
View 2 Replies View RelatedGNU/Linux kernel 2.6, Slackware 12.0
MPlayer 1.0rc2-4.1.2
GNU Bash 3.1.17
I've got a set of MP3 files on dir .../foo/ and I want mplayer to play them sequencely but skipping some of them. If I run 'mplayer *' this will do but ofcourse won't skip any files. I think a shell script could be written to do that. It would be something like this (using some pseudocode):
#!/bin/bash
#After an example from Intro_Linux by M. Garret.
LIST=$(ls *.mp3)
[code]....
how do I skip to a particular second/frame *while* watching a video in mplayer?
View 3 Replies View RelatedI recently bought an ASUS nettop that is supposedly able to play HD movies, but after installing Lucid and the proprietary drivers, HD movies (720p) are as jumpy as they are on my old non-HD PC. How can I figure out if there's some sort of problem preventing HD movies from playing at full resolution?
View 2 Replies View RelatedWhatever i try to play a .avi or play a Flash movie the movie does that... by the way the sound does the same thing. Followed the Multi-media and Restricted Format Installation Guide Used the MMCHECK - Check Your Multimedia in 10 Steps - Script File, as proposed by RedDwarf and Googled and found this: [URL] but it does not help me because I already run opensuse 11.3 with a 2.6.34-12 kernel My Laptop with the Problem:
Asus X51RL
Review Asus X51R Notebook - Notebookcheck.net Reviews
When playing a song, I am unable to manipulate the seek bar and skip to&fro, it's seems absolutely except for the fact the cursors (if that's the right word for it) glows, and it says "Jump to XXX" but it does nothing. This pretty much happens on any and every song, however if I play another track come back it may or may not work. Sometimes it works fine (usually not), but it'll freeze again after the track changes.
View 7 Replies View RelatedI just(4 hours ago at this writing) installed 10.04 LTS LL on my Toshiba Satellite. I transfered a few albums from my external HDD, to my laptop, and opened Rhythmbox. First, as usual with a new install, I had to dl Gstreamer, and some other plugins, to allow the program to properly play mp3's. This was done with no problems, of any kind, but I then found that, once a song began to play, I was unable to skip ahead in the track.
View 2 Replies View Relatedvideos/hulu/etc. are suddenly screwed up. i get no sound and the videos all play in fast forward. i'm assuming i missed the solution to this in one of the many ginormous threads on here...can anyone point me in the right direction?
View 1 Replies View RelatedDoes anyone have any experience of forwarding audio from Ubuntu to Windows 7 x64 via JACK? I'm struggling to find any useful documentation. I've tried to accomplish the same using a Pulseaudio server, which is better documented but the windows binaries are years old and as far as I can tell can't be made to work without disabling IPv6. Any other ways to forward audio would also be welcome. Bandwidth isn't really an issue as it's VM to VM on the same machine.
View 1 Replies View RelatedAfter working properly for over a year my videos started playing in fast forward. This can be on the internet (as in wwww.wimp.com) or my video clips located on my hard drive.
Also, on a different note my volume control stopped working. My keyboard has a volume control wheel that I used to use to control the volume of music and videos. First it gave out on my side and continued to work on my wife's side and now it doesn't work on ether. (the volume level bar pops up on the screen but doesn't affect the output) (The volume can still be controlled with the mouse though by clicking on the volume bar on whatever web page I am looking at.)
I'm having a problem running Mplayer in Ubuntu 9.1. I've installed and uninstalled several times. Mplayer refuses to open from the applications menu.n I attempt to open from terminal it comes up with the following: mplayer: error while loading shared libraries: /usr/lib/i686/cmov/libavcodec.so.52: file too short I've also tried other players such as Gnome Mplayer to play the video and it plays really fast with no audio or video. This has really been the only problem i've run into since switching from windows to linux two weeks ago.
View 3 Replies View RelatedI've installed both mplayer and mplayer-gui packages, but I cannot find and launch mplayer with graphical interface. I want the classic mplayer's gui and seems that isn't there after installed. Doesn't appear ind applications on launcher and when I'm trying to run from terminal the mplayer-gui command I get the error:command not found. So, where is mplayer-gui and how to get it back. This problem doesn't exist in any previous ubuntu version.
View 3 Replies View RelatedI'm currently using Debian Testing with Debian Multimedia Sid repos. The current Mplayer (3:1.0~rc4+svn20110308-0.0) seems to be broken - I can't encode AAC to AC3 on-the-fly anymore. I'd like to compile the latest snapshot or SVN version, but what is the easiest way to compile it with the same options as the one in debian-multimedia.org?
View 3 Replies View RelatedDovecot is setup to run on each startup but each time I restart my system, I find that it is not running(killed), when I check my logs it says time moved backwards for x seconds. Essentially, I'm having this problem, [url] what is the solution in ubuntu so that dovecot would not be killed on startup? currently I have to put /etc/init.d/dovecot restart into rc.local to restart it again...
View 1 Replies View RelatedJust did a fresh install of Karmic, got all necessary decoders installed for video and audio playback...I think.
Problem is I can't forward/search in audio files I am playing. I mean I can only Play, Pause, Stop or "Next-track" a music file. Video files are fine.
I've tried Exaile, Rythmbox and even Totem. It is like the audio files are "half read-only".
If I drag a horizontal scroller in the music player and let it go, it will only jump back to the position where it is actually playing.
Has anyone experienced, this? I am a missing something in gstreamer or something like it?
How do i make VLC jump forward or back using the mouse wheel regardless of where i have the mouse cursor in the window? I went to preferences and changed the hotkey to 'short forward jump' to mouse wheel forward, but nothing seems to happen when i press the forward button.
View 2 Replies View RelatedIs it possible (by command line) to move forward to a time point in an audio file?
View 3 Replies View RelatedI have a file like this:
Code:
I need to search it backwards for "notable line" strings AND the first numeric string preceding that line. I've discovered that it's easy to search backwards by tac file | grep pattern, but how to tell grep to continue searching from where the pattern was found? In short, I want to make the output of the example above into this:
Code:
Or I must use another tool, like awk or sed? If so, how do I do so?
I'm trying to use sed to search and replace backwards. The problem is that I have a shell script that is required to put commas into big numbers. For example
9999999 as 9,999,999
I've tried a few things, but none seem to work:
Code:
$ echo 9999999 | sed -e 's/([0-9]{3})/,1/g'
,999,9999
$ echo 9999999 | sed -e 's/([0-9]{3})$/1,/g' -e 's/([0-9]{3})/1,/g'
999,999,9,
$ echo 9999999 | sed -e 's/([0-9]{3})$/1,/g' -e 's/([0-9]{3})/,1/g'
[ode]....
It would be much easier if I could search backwards! For example Bash parameter substitution style:
Code:
$ echo 9999999 | sed -e 's%([0-9]{3})%,1%g'
I am trying to take advantage of VDPAU for playing video files with my ASRock ION 330. As far as I know, MPlayer and VLC both include VDPAU support. Ok then, I managed to make MPlayer work from the command line:
mplayer -vo vdpau -vc ffh264vdpau ./filename.mkv
In this way it plays a 720p content smoothly, with under 10% CPU use. Great!The problem is when I try to make this permanent, i.e., configuring the files ~/.mplayer/config and ~/.mplayer/gui.conf.This is what I have in there:
config
======
vo=vdpau,xv,
vc=ffh264vdpau,ffmpeg12vdpau,
[code]....
But still, when I open MPlayer from the menu, no matter what file I try to open it gives this ugly message:Error opening/initializing the selected video_out (-vo) device. With regard to VLC, I had no luck, although I am using the latest "1.0.3 Goldeneye" version, I don't know how to make use of VDPAU.
Running Lucid Lynx. VLC works fine but Xvmc output uses less CPU on my PIII 750 laptop and isn't supported by VLC. I installed Mplayer but I can't play anything from the Mplayer GUI. I get the message "FATAL: Could not initialize video filters (-vf) or video output (-vo)". The interface is all black so I can't see the controls. I installed Gnome Mplayer GUI and now I have different problems. Playing video files, including VOB files from a DVD works fine. Trying to play a DVD with or without menues does not. I followed the instructions at URL.... What could be wrong?
View 3 Replies View RelatedSo I'm running Ubuntu 10.10 64-bit on an HP Mini 210-1190NR. Everything runs fine except mplayer. I installed mplayer from the repos but when I try to play a video I get no sound. I can't figure out why.
Here's the output:
Code:
mplayer star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv
MPlayer SVN-r32636-4.4.5 (C) 2000-2010 MPlayer Team
160 audio & 350 video codecs
Playing star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv.
Cache fill: 3.12% (262144 bytes)
[Code]...
I'm trying to use mplayer to stream some content from the net to my desktop. This worked fine the first time I did it (though failed dismally on all subsequent occasions. Now, the first umpteen times, I was behind a proxy. Now I am not behind a proxy, but mplayer still looks for the proxy settings. Why? I have changed the proxty settings in the network proxy (applied globally), in Firefox and every where else I can think of. I use the following command:
Code:
mplayer -dumpstream -dumpfile ~/Desktop/<desired_filename>.avi http://<source>.avi
and I'm told in response
Code:
Resolving www<proxy> for AF_INET6...
What gives? Why is mplayer trying to use a proxy, and how can I tell it not to?
i followed this thread and got mediatomb on my ubuntu 10.04 lucid running. i have a samsung UE-32B7020 tv.
the only problem is that for .avi and .mp4 movies (these are the ones i tried), fast forward and rewind do not work. transcoding is not enabled.
Every music or video player I use there is the same problem, I can't fast forvard the song. the seeker is grey and I can't move it so I can't move the slider to, for example, to middle of the song.
View 8 Replies View RelatedI'm running CentOS 5.3 on a laptop and there are numerous warnings in the dmesg output that look like:
Warning Timer ISR/0: Time went backwards: delta=-252671169 delta_cpu=-248671169 shadow=6729603658291 off=235680520 processed=6730092000000 cpu_processed=6730088000000 0: 6730088000000
I am running a LAMP system with CentOS 5.4.The clock just automatically shifted backwards by 19 hours and 30 minutes crippling some of my reports and probably damaging something else along the way.The router supplying IP to this server is a DD-WRT and shows proper time.By the way what does that mean? time drifted by that 33.667 ms?
View 8 Replies View Relatedwhat do i need to write to get the mediafile info from mplayer?
View 6 Replies View RelatedThe DVD is mounted. From the console, I input "mplayer dvd://", and I receive the following output:
MPlayer SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
[code].....