I've got a little video and I want to crop it so that a part of it falls away. I installed and tried Openshot, Kino, Pitivi and Kdenlive, but I can't seem to find a way to crop my video. Isn't there any way to crop videos in Ubuntu, or am I just blind and overlooking the function?
View 9 RepliesI have a bunch of images I took of the same thing, but I was holding the camera, so each one moves a little bit. Is there some way to crop the images so that the focal point doesn't move between pictures?I've done some searching but I haven't had much luck finding anything.
View 1 Replies View RelatedMS office 2003 came with a prgram called "Microsoft Office Photo Manager". It was a surprisingly lightweight application that could adjust color, crop and resize photos. Very simple interface, easy to use. Perfect for simple modifications to digital photos. Is there anything like this in linux? Gimp is certainly not it. Office Drawing and F-Spot photomanager are not it either.
View 3 Replies View RelatedI'm trying to find a US source for an inexpensive PCI video card, most bang for the buck.It must be a standard PCI card.
View 9 Replies View RelatedI need to know a command that is able find the hight and width of a video. I know in VLC you can go into the Codec details but I need something in the command line because I have hundreds of files that I need to organize. I could not find any VLC command that does what I want to do.
View 2 Replies View RelatedI've successfully install tovid on my natty ubuntu
with sudo apt-get install tovid
Reading package lists... Done
Building dependency tree
Reading state information... Done
tovid is already the newest version.
but can't find it on menu applications / sound & video and any other tab
have tried refreshing gnome panel
killall gnome-panel
but doesn't solve problem?
I'm trying to get the screen graphics working correctly on a newly purchased ACER Aspire 7740G laptop. It has a 17.3" 16:9 screen with an ATI Radeon Mobility HD5470 512MB graphics card.
The command LSPCI in Terminal gives.....
"02:00.0 VGA compatible controller: ATI Technologies Inc Device 68e0"
I've also uploaded /var/ log/ xorg.0.log.
In System/Preferences/Display the pink coloured monitor screen has 'UNKNOWN' displayed on it with only 3 resolutions available.
I installed the ATI Catalyst Control centre but when it initialises, it produces an error saying that there is no driver installed - I thought the XORG log shows that the driver is installed.
The command ATICONFIG in Terminal reports.........
"aticonfig: No supported adapters detected" !
I been struggling with this since Karmic and I know others have as well. This is really the only thing making me keep a Windows install around for my personal stuff.
Problem: Convert .TS files to iPod or really any smaller format keeping A/V sync after edit. I can covert my .TS file perfectly if I do not edit it but I want to just do a simple, quick trim of 2 mins from beginning and end.
HandBrake with convert the file perfectly but cannot trim. Avidemux does a great job on the video but I always have to play with the audio shift to get it in sync. It is usually betwenn -250ms to -1000ms off but I cannot count on it. If I run the video through DGIndex in Wine or view it with Mediainfo both programs detect the an offset problem but they are always wrong by almost 500ms and it is never constant.
Regular video editing I have pretty good luck with my normal DV files and I could even run the .TS files through other programs but it is too time consuming to be useful form this simple task. Anytime I want to take my recorded TV .TS files I cannot edit them quickly without making a full project out of it in Openshot Cinelerra, etc.
Has anyone found a quick, reliable way to do some lite video trimming in Ubuntu and keep A/V sync without having to resort to any Windows programs?
EDIT: Also I really do not want to resort to have to demux separately either. I know I am asking a lot but I got spoiled with a couple of Windows programs that will edit without reencode programs like VideoReDo can do the editing and converting all at once (for $100 !).
I am using Open Office 3.1 and I am working on a presentation, that I have to give in march and I am wondering how to crop pictures after pasting them into the presentation. Could not find any way to do this yet.
View 4 Replies View RelatedI have the ETOPO1 global relief model, [URL]...in georeferenced TIFF format. What I want to do is crop out a section (specifically the area of New Zealand's continental shelf), and then reproject that section into a different projection (the New Zealand Continental Shelf Lambert Conformal 2000 (NZCS2000) projection).
Matters are complicated somewhat by the fact that the region in question crosses the 180 degree longitude line. I've tried googling, reading the GRASS manual, playing around in QGIS, and even have the book "Desktop GIS" by Gary E. Sherman. But the seemingly simple task of cropping a raster DEM has defeated me. I cannot do it in ordinary imaging software, because the bits per pixel of the raster is too high; programs like the GIMP would grossly quantise the relief.
I want to crop a postscript poster. it is an A0 size, and I want to crop it into exactly four pieces to print on four A2 pages, pack them in my bag, and go to the conference (actually a long trip). Is there a way to use terminal, to crop this file? I rather use terminal instead of Gimp or other graphical packages.
View 1 Replies View RelatedAfter spending a few hours and having some little sleep, I am very puzzled and disturbed by the fact that new-new-02-5-1.png does not have the intended 818x788. It must have to do with cropping with nonzero offsets.
View 2 Replies View RelatedBefore migrating to Fedora/linux, during my window days, one of my programme of choice was MS word. regardless of all it's bugs, it did all i needed it to do (eventually). Now in Fedora I have Open Office. As far as word processing it's fine. But when it comes to inserting Images I hit a brick wall.
when it cam to making bingo cards, I could choose multiple images and resize them with one click, move them all together and crop them on the fly. Open Office doesn't do that. My question is: What other option are there in the fedora world that could help me.
I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedWhen I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View Relatedthe movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedI'm using 9.10 on acer aspire one (not the netbook remix).im using the default messanger client empathy.everything else works fine but when i try to video chat the video chat begins but if the other person even moves a litte or even nods his head then the video becomes so choppy that u cant see anything and then after 5 min comes back to normal for a second or two.i have all the latest updates and gstreamer0.10-ugly-multiverse which is required for video chat b/w empathy and gtalk.
View 1 Replies View RelatedMy system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies View RelatedJust installed Ubuntu 10.10 on an old Dell Dimension 8400 with an ATI RV370 Radeon X300 video card and 512MB of Ram. The video seems to go very fast and skips. I followed the Comprehensive Multimedia & Video Howto but still have the same issue. I have also read many posts but I have trouble understanding some of the responses. Could it be the low amount of RAM?
View 1 Replies View RelatedI have an integrated intel video and latest xserver-xorg-video-intel driver(using only stable repo). Now I wanna watch high-res video. From the bits of info collected from all over internet I understood that I need to:
1.aptitude install libdrm libva.
2.compile or find the .deb mplayer-vaapi and install it.
3.add -vo vaapi -va vaapi to the mplayer command line in gnome-mplayer.
My question : is that correct or did I miss something? Do I have to compile latest libdrm and libva or the ones from the squeeze repo will be good? Do I need kms enabled, i.e. install firmware-linux-nonfree?
OpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
I been looking on Google to convert videos to mp3 audio and all I get is just a video conversion from one format to another and some things I installed just get error messages so I took them back off. Anyone know the proper syntax in Mencorder to convert a video just to audio? Or any other program I can use that won't cause this much trouble?
View 7 Replies View RelatedFrom this link a video is present.Usually I see videos from any other website in /tmp but the same did not applied to video on the link I posted. Where can the video but present in the ubuntu directory structure while watching the web page firefox.
View 2 Replies View Related