is there any way to activate the graphic cards without a monitor?It seems in xorg.conf, a "Device" had to be referenced by a "Screen" to have it activated.
I wonder is there any other way to activate a graphic cards without monitor connected to it?
I inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
I am finding a lot of issues with flash in 11.4 release. As I know it is flash issue, because some people after updating flash on 11.3 got the same problem.
Flash seams to be crashing or/and slowing down web browser. After trying to figure out where is the problem, i found that:
1) removing SLI helped a little bit
2) updating to beta (270) nvidia drivers helped a little bit (moving window with flash animation from one screen to another one that is connected to different graphic card does not crash the browser anymore)
But still the problem exists.
For example, sometimes when i minimize the window with flash animation and i open new window (e.g. with spreadsheet) and move it on the same place where was previous window with flash, I can see this flash animation as a background of the new window....
Also, when i am moving the window with flash around, the flash disappears or gets gray.
Sometimes, ..... does not load the movie, but if i open the movie in VM windows, it works fine. After reloading Xwindows it works for a while also in opensuse.
I'm trying to set up a 4 monitor sys with 2 different cards. 1 is an ATI, the other an inVidia.
View 1 Replies View RelatedI'm having a rather hard time getting my 3 monitors setup as one display. I can get all three to work without too much heartburn using 3 separate X instances. The monitors are on 2 different video cards, one dual heads. The other on it's own card.
I've tried countless ways to get this to work, and I'm just not feeling the love. There are 2 17 inch monitors on the 1 video card and then the second video card has a 24 inch monitor on it. I can get the two monitors on one head to work with twinview, but the third one is left out.
The physical configuration looks like this..
17inch on the left of the 24 inch monitor, and another 17 inch monitor on the right, with the 24 inch monitor being in the center.
I'm going to include my current xorg.conf and lspci.
xorg.conf
Code:
harry@ubuntu:~$ cat /etc/X11/x
xinit/ xkb/ xorg.conf xorg.conf.backup
harry@ubuntu:~$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
[Code].....
This is my lspci output.
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600 Series
Initially I had just teh HD 3600 in the PC, using the "AMDccle" drivers and configuration running two monitors.
I then added an old RV280 PCI card to allow a third monitor. When the PC powers on the bios output is on the RV280, once linux starts the RV280 monitor goes to the ubuntu desktop colour, the two monitors on the HD3600 get a signal (power up) and display the logon screen.
When I log on the two HD3600 screens become my desktop. If I ctrl alt f1 etc. the terminal screen comes up on the RV280 and the two HD3600 screens go blank. This suggests that all 3 monitors/ 2 graphics cards are all working ok, and ubuntu is happy with them. My problem now is to make the RV280 accessable via X/gnome at the same time as the HD3600. It would be nice to have it as a 3rd monitor on a very wide desktop, but I'd settle for it being its own little window running various tasks/programs such as mail/firefox.
I'm currently using windows 7 on my computer, I have an ATI GPU and I am willing to install Ubuntu to finally rock it out. However I'm going to change my video card for a newer nVidia one in a few weeks and I'm wondering about the drivers change.. Under windows it should be quite simple however I'm quite afraid of possible issues I could have under Ubuntu. Probably (I believe and hope) everything will just work fine, simply plug and play, no conflicts, nothing at all. However I'm asking because I would like to avoid any issues, as I prefer dealing with windows one month or so more than having driver issues under ubuntu...
Resume: is it possible that changing GPU (brand) generates driver issue under ubuntu 10.10?
I'm using Ubuntu 11.04. I should have two graphic cards, and they are both detected in the terminal.
Code:
lspci | grep VGA
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200] [10de:084b] (rev a2)
03:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400GS] [10de:10c3] (rev a2)
Both cards have monitors plugged into their VGA ports, but only one of the monitors shows a display. The other monitor goes into power saver mode right after start up. Nvidia X Server settings only shows a single graphics card (the 8200) and a single monitor (detect monitor finds nothing). Going through Prefences: Monitors also only shows a single monitor and doesn't detect a thing when detect monitors is clicked.
Monitor one has 1440 x 900 resolution and I'm not sure what the resolution of Monitor two is supposed to be, but it displays rather nicely at being set to 1440 x 900.
Both graphics cards are detected and usable in Vista, but a quick switch of the plugs shows that only the 8200 is registering in Ubuntu.
Ideally I want to have a dual monitor set up, with one screen showing documents or pictures with the other using Gimp or Blender.
I have Installed Fedora 10 and I have assigned manual IP address to eth0 and trying to activate the eth0 but all buttons are disabled.
View 2 Replies View RelatedI am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between:
nvidia proprietary driver
ati proprietary driver
generic driver
Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers).
What would be the steps to make this (semi-)automatic and avoid restarting X?
Where could one find examples of such scripts?
I'm about to buy a laptop and there are some interesting and affordable Toshiba ones, but they all have Intel GMA 4500M graphic card. I have NVIDIA card on my desktop and their drivers work perfectly, i was just wandering what the situation with Intel's graphic cards is. I need 3D rendering for compiz and stuff, is it too much of a hassle to enable them?
View 2 Replies View RelatedI have 2 video cards installed, and I only have one 22" monitor (1680x1050 pixels).ATI Radeon HD 4290 Nvidia 7300 GT Silent How can I make the both video cards render OpenGL stuff at the same time? Is it even possible?
And which GPU is faster? ATI Radeon HD 4290?
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies View RelatedIs there a graphic tool that can monitor the traffic over a USB port?
ie like system monitor for network traffic but over a specific port?
Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).
Can I do this in linux (Slackware)?
I would like to know how to monitor dual nic cards graphically in real time. I want to be able to see the traffic of each port separately.
View 3 Replies View RelatedI'm wondering a couple of things about my LAMP stacks:
1) How do I get a list of all the network cards installed in a linux box? I've run this command and it shows 2 network cards which is probably all of them:
Code:
mii-tool -v
2) How can I check the percent utilization of a given network card? I.e., at any given time, what linux command will tell me the how much of a network card's bandwidth is being consumed? I've checked both ethtool and mii-tool and I don't really see any helpful stats.
3) How can I make sure that a linux box will optimally use both network cards? I'm a bit fuzzy on how IP addresses and network cards and hostnames work together.
I want to buy a laptop with gma 4500hd WHAT I WANT IS
1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup
searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
I have an ubuntu PC with 512 MB ram and an 3d graphic card that can normally support Guild Wars on windows xp. I installed the game with Wine an the game opens, I can see my character menu but the problem is none of the 3D graphic parts works, I just see a black screen.I even installed directX.
View 3 Replies View RelatedFirst of all, this tutorial will use NDISWRAPPER, not b43, not wl (Broadcom STA). So, hooray for new method (actually, the only method ). Now, I don't want anyone to get scared because of bad experiences with Ndiswrapper or whatever, it's actually quite easy. I did not come up with any of this info. I'm just putting this guide together from Kacper Szczesniak's info (who came up with this method), WifiDocsDriverbcm43xxFeisty_No-Fluff from the Ubuntu Wiki, and my experience. The Broadcom STA (wl) driver has references to monitor mode in it's code, but does not have that functionality in reality. The Broadcom Windows driver on the other hand does have this capability. So, for monitor mode to work, you will need a patched version of ndiswrapper.
1) Install the Linux kernel headers:
Code:
sudo apt-get install linux-headers-$(uname -r)
2) Install the tools required to compile Ndiswrapper:
Code:
sudo apt-get install checkinstall dh-make fakeroot gcc build-essential
3) Unload current Ndiswrapper module, if running:
Code:
sudo rmmod ndiswrapper
[code]....
have an Nvidia 8400GS installated (one VGA one DVi) and I have two Acer monitors (same size different model) one is attached VGA otehr DVI. The dual graphic seems to work; however, it is MIRRORED! It is not a "spanning" desktop that I would prefer. I tried to install the drive from nvidia but once I try to restart X it won't load and I have to revert back to my backup config which mirrors the desktop on both screens. (I can see myself typing on both screens.
[Code]....
I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies View RelatedCurrently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
I have two Ubuntus installed on my computer, but 10.04 doesn't have the right graphics driver, because it's not fast like the other one.So I need to change my graphics driver.Does anyone know how?
View 5 Replies View RelatedI am runnin Ubuntu 9.10- the Karmic Koala on acer aspire laptop. since everythin in this netbook is crap. so I hardly can see movies that so much going on in them( when so much happens, the screen freezer for a while therefore i miss the most interesting bits) I used kinda every players. the only one that works for me is mplayer since it does not require high spec it works good but it has its own costs. if I use mplayer then i have the porblem of the sound (eg i can hear stuff before it happening) I am now just wondering if there is a way to decrease the quality. I really dont care if i have great quality or not as long as i can c whats happening ( at least for this netbook anyway)
View 1 Replies View RelatedBasically my portable computer's speakers have "Dolby Home Theater - Virtual Surround Sound" written on them. Now I figure there has to be some software (in Windows) that controls the whole thing. Is there something similar that in Ubuntu?
View 4 Replies View RelatedI can only log into X with "vesa" driver (otherwise it gives me the black screen) and ubuntu never boots directly into GDM, always the console.
View 1 Replies View Relatedim using ubuntu 10.10 now, kernel 2.6.35-23, in the past time im believe there is too much issues appears regarding to vaio z dual vga with ubuntu that ubuntu running both vga which cost battery power, but with ma kernel now it seems running a single and a default vga only, ma laptop [URL]
[Code]..