We tried to burn an audio cd with the default burner in Ubuntu, but we can only play the cd on the computer. I was not in front of the computer, another user was, but I think they used Audio CD Extractor )
View 4 RepliesI spent over an hour today and over an hour last night googling and trying everything and so far no success. I found many threads with oddly similar complaints, but their solutions haven't worked for me.Last week I upgraded my system, basically a complete overhaul (in the old case). The new system is based on an ASUS MB which comes with VIA VT1708B audio onboard. I installed the latest 32-bit Linux Mint on it. The case's front audio jack doesn't work, the rear audio works but is too quiet.
Things I have tried that have not worked:Different combinations of settings in the basic sound preferences dialog, the GNOME ALSA mixer, and the PulseAudio volume control (I've probably played around with these so much that I've tried every combination)
Getting sound out of the back ports just fine. Using an ASUS P5N73-AM motherboard and a fresh install of 10.04. Everything else works perfectly except the blasted front panel headphone port.
View 5 Replies View RelatedI run Ubuntu 10.10 on my Intel DG965RY. My front audio ports don't work in Ubuntu, the rear one does. I never got it working earlier when I had Ubuntu 10.04 but this time I am going to try it again. My codec is SigmaTel STAC9227
My ALSA information is here.
Handy details:
!!ALSA Version
!!------------
Driver version: 1.0.23
Library version: 1.0.23
Utilities version: 1.0.23
[Code].....
I know something that I will have to change the model of my module to make the front audio jack works but I couldn't find a model related line in my ALSA configuration file - /etc/modprobe.d/alsa-base.conf (I was able to get to that point in Ubuntu 10.04, may be something has changed).
After a recent hardware upgrade, I'm no longer able to use the front panel audio ports on my Antec P180 case. They worked fine before with my old ASUS motherboard, but with my new MSI 870-G45 motherboard I can't get them to work for some reason.
I checked out this thread, [URL] but didn't see much in the way of problems/solutions with front panel audio ports, but it's a lengthy thread so maybe I missed it.
now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies View Relatedwith my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
I lost front audio after alsa upgrade to 1.0.23 headphone and mic doesn't work anymore . Anybody out there who can help a newbee.
HDA-Intel - HDA ATI SB VIA VT1708S ALSA Information Script v 0.4.59.doc
ALSA Information Script .doc
I have openSUSE 11.4 KDE version (64-bit) on a desktop PC. My sound card is ASUS Xonar DX 7.1 (PCI-E). I am brand-new to the Linux experience. I get audio out to my speakers which are connected to the jacks of the rear I/O panel of my PC. I do not however get audio out to my headphones which are connected to the jack in the front panel. I know that the headphones work fine because they do so when I boot up in Windows XP. Here is what I discovered so far: KMix does not show that I have a front panel audio channel. But when I run AlsaMixer it does show that I have such channel and, upon manually turning the volume on, I do have sound out to the headphones.
Therefore, I deduct that I have some sort of configuration problem with KMix and would like to fix it as I prefer to use the GUI interface instead of the AlsaMixer one. It's just a matter of preference! I would like to troubleshoot things using the Audio Troubleshooting guide (SDB:Audio troubleshooting - openSUSE) but I notice that openSUSE's version 11.4 is not mentioned in it. Should I follow the instructions for version 11.3 or wait for an updated guide?
I have a stereo in my office. Its really a DVD player that will also play CD's. It has a nice surround sound setup. I have a bunch of mp3's on my computer that I would like to burn to a blank DVD that I have and play one long continuous DVD audio CD. Is this possible and if so, how do I do this? I have search for three days, and have come up empty.
View 2 Replies View RelatedA friend of mine has downloaded an album from itunes for me because I could not do it from Ubuntu. Afterwards he sent me the files.
Is there any way I can burn these files to an audio CD from Ubuntu?
Also... Can I just put these .m4a files on a USB stick along with my .mp3`s and expect all car radios to be able to play them?
I am having problems burning audio CDs with Brasero 2.30.0 after my upgrade to 10.04. I was trying to burn a .wav file to CD but Brasero ejects the media without burning anything after transcoding the wav file and creating an image. I'm attaching the error log to aid in debugging.I can burn data CDs fine. My burner, a Samsung SM-308B, can't burn DVDs so I don't know about burning them.
View 9 Replies View RelatedI need to burn some music to a dvd (I don't have enough CDs to fit the music on them) I don't need to play the music on a CD player just a dvd player. How do I do this?If I can't do this, then how do I add a (blank) video to a lot of individual audio files?
View 5 Replies View RelatedBrasero is broken ([URL] .... - "impossible to link plugin pads") and neither Devede nor CD/DVD Creator offer me the classical Audio CD format.
What is a simple and fast way to get Debian/GNOME to burn an Audio CD. Blimey, that can't be that difficult??
For the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View Relatedhappened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies View RelatedWhen switching off an HP dv-2140us with a fresh/clean Ubuntu Lucid install, an audio pop noise can be heard, similar to a DC transient on a loudspeaker.This has happened before on an old computer of mine (as reported here), but newer Ubuntu releases (including Lucid) have fixed the issue.
View 1 Replies View RelatedI have a G62 HP laptop with Ubuntu 10.04 on it. I have updated alsa and everything else I can think of. When I have an HDMI coard plugged in, sound only comes out of the computer (I use VLC).
View 1 Replies View RelatedI have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
I have just migrated from windows to linux(Mandriva one 2010 with KDE4) and am a noob to linux.I Had never used Linux before. while everything is going on fine and am learning about it slowly. My problem is that though I am getting sound from my rear audio jack which is working perfectly, my front audio jack is not working at all. I am not getting any sound from it.... When in windows to disable front audio panel detection to get it warking. So I think there might be a similar workaround here... but that's just a guess. i am using a Gigabyte- GA31 MES2L motherboard which uses Realtek Audio Drivers.
View 2 Replies View RelatedI'm running Ubuntu 9.04 and I've just gotten round to updating the sound. The ALSA built in is too old to have support for the X-Fi chip used in the Forte so I built and installed ALSA 10.0.22.1. On reboot, it detects the card as X-Fi Titanium series (as expected), but when I run the test
Code:
speaker-test -D surround51 -c6 -twav I only get output from Center, Rear Left, Rear Right and LFE - i.e. the front channel is missing. I'm not sure if there are any ALSA configuration files left lying around from my old sound card (Intel HDA audio) and I've forgotton what they might be called or where they would be.
Can someone tell me the locations of the various ALSA configuration files? Or is this a known thing about the Forte? (Maybe the card has the front two channels wired differently or something) Or maybe there's a configuration option I've missed.
I'm using it on a small IBM machine in my closed ( ) which is my multimedia center, file sharing, router, http server & others. To escape the cable paradox, lately I came up with an idea to stream music from my mobile phone (LG GD880) via bluetooth to my SUSE box (which has it's audio output linked to my HIFI Sound system). This means pairing the devices and of course set the SUSE box as reciever. I found how to accomplish this here and here .
The problem: While trying to complete the above tutorial(s), I found that in /etc/bluetooth there is no ' audio.conf ' file, only ' main.conf '. If I insert the option: Enable=Source in main.conf, it has no effect what so ever. This means that org.bluez.AudioSource will not show up in D-Feet, thus I cannot take the next steps. What can I do? Is there another way to accomplish the audio streaming?
I have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
I have a stereo in my office. Its really a DVD player that will also play CD's. It has a nice surround sound setup. I have a bunch of mp3's on my computer that I would like to burn to a blank DVD that I have and play one long continuous DVD audio CD. Is this possible and if so, how do I do this? I have search for three days, and have come up empty.
View 2 Replies View RelatedOther day i installed limewire downloaded some music i went to burn them and did something wrong? after it was done i went out to my car ( can play MP3's in car) to see how it sounds and came up with a error i think what i did was just copy them over and burned them NOT convert or change to audio cd? steps or program to use that burns them into a audio cd and do i have to convert them first and can i use a DVD cd? (if not no biggie will use regular cd)
View 2 Replies View RelatedI am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
I had this issue in Slackware64 13 but I had hoped that it would have been fixed in 13.1. I have my permissions setup correctly, I can even burn DVDs just fine, but every audio CD I try to burn in k3b gives me an unknown error with regard to cdrtools (254). It gives me this error at about 200mb of writing every single time, even when simulating the burn. Here is the error log that k3b puts out.
Code:
Devices
-----------------------
TSSTcorp CDDVDW SH-S223C SB02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
[Code].....
Strange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.