I hava a ASUS P5GC-MX/1333 and I want to install the driver from my Realtek audio, because, in windows 7 the volume is very loud, but in fedora even in the maximum is very low.
View 10 Replies
I have an AMD Athlon Regor 2.8 Ghz Dual Core CPU. About a month ago I overclocked the bad boy to 3.36 Ghz, on stock voltage. Since I have an AMD chip, I have the Cool and Quiet feature. With CnQ on, it never shows more than 2.8 Ghz (my stock speed), even on Full Load. However, with it off, it shows the correct 3360 Mhz all the time. I would like to keep CnQ, as well as my overclock. I've read in forums that it's okay to do that, that CnQ will automatically clock up to overclock when needed. But for me, with CnQ on, it only hits 2.8. Nothing more. Is this an Ubuntu problem? Is there a setting where I can change the maximum allowed speed of my CPU?
View 4 Replies View RelatedJust got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
View 7 Replies View RelatedI just did an upgrade from F12 64bit to F13 64bit and sound causes problem, It does work, but even when I set everything to max, the sound level is still way too low. I checked pulseaudio volume control, sound preferences etc, everything seems to be normal.
View 2 Replies View RelatedNot sure if others have noticed this. When I go into sound settings, click the output tab, select the sound device I want to edit and change the bass levels etc, close the window and go back in all the settings are reset to default and no changes are saved.
If I leave the window open and make the changes they are reflected in VLC for example, but if I close the window it again resets to defaults and my Bass is back at Maximum....
Is this a BUG I should report or is there something I can download to get this configured elsewhere or to fix this issue? I seem to recall something similar in Fedora 14 that was fixed, but I cant remember how I did it now
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies View RelatedI will be upgrading my RAM soon. What is the maximum amount of ram a 32bit OS can see?
View 14 Replies View RelatedMY current screen resolution is 1200X800 but from my monitor manual I can see that it support these resolution also 1366X768, 1280X960, 1280X1024 but there is no such option to change in my fedora 12. How can I change that?
View 14 Replies View RelatedIs there a limit to the number of files ext3 can support?
Reason I'm asking is because on one of my internal drives, I have around 750,000 files. The drive is 500Gb and currently using 150Gb... I noticed recently that when I try to copy a new directory or file, the transfer rate is extremely slow at times. It is sataII and sometimes it gets as low as 500kb/s (yes, kb!)
Would somebody please shed some light?
I noticed it might be related to the process gvfsd-metadata
I'm using Fedora 12 64-bit
The transfer is from an ext3 to ext3 filesystem.
I recently switched from Ubuntu to Fedora and had this screen brightness issue with my HP Pavilion dv3 notebook. The brightness is so blinding and I cannot adjust it.Fn keys works and responds but the screen stays the same.
View 9 Replies View Relatedguys when double-clicking the bar where it is close, maximize and minimize, or maxima and it will not restore I do not know what more I moved here I'm not getting to solve this problem anyone have any idea what can this be?
View 2 Replies View RelatedI upgraded to FC15 in early june, come June 15 Thunderbird suddenly ceases to send or receive any email. It pops up with the message "You may have exceeded you maximum connections" and I've tried changing the cache connection count to 1 instead of the default 5 and every OTHER post about that error suggests to no avail. Funny thing, my primary desktop is still on FC13, same thunderbird version, arch and account setup (with SSL enabled) and works flawlessly. Even with -safe-mode enabled it doesn't work. My lightning calendar also doesn't sync since then.
I have found that if I turn SSL off IMAP works again, SSL SMTP still fails. If I turn SMTP SSL off it sends mail. The calendar is an https (SSL) link. Obviously the issue is SSL and Thunderbird in FC15. There are no errors/messages in the console, maillog or the in-built error console.I will NOT use mail without SSL as I may occasionally use unencrypted WiFi.
I'm out in a village and we get more powercuts than I like, and recovering the journal on my server is getting rather irritating. I'm looking into getting a cheap UPS, the powercuts will last usually a maximum of 30 seconds, so I only need a few minutes.
I've been looking at:Plexus V 500VA UPS
Plexus V 1200VA UPS
APC SUA750I Smart-UPS 750VA
I know near to nothing about these things, my question is will those work with a machine with a 700W PSU? How do you know? The 500VA doesn't really mean much to me. Ideally I'd like to get my desktop on there too, but that's more for convenience than anything.
Will any of these do the job? Any Linux compatibility issues I should plan for? Any recommendations from personal experience is greatly welcome Edit: I will be happy with a UPS that can inform Linux power is down, and get the server to cleanly shutdown straight away, I'm more interested in a clean shutdown than maintaining power to use the machines during the outage. Edit 2: Can UPS devices be piggybacked to one another to provide extra uptime? i.e. Could I run 2 of the 30's so when the first runs down, the 2nd carries on?
Whenever I play streaming videos, (mpg, wmv, etc), the volume will move from where it's set to maximum level. Then I have to adjust the sound. If I play another streaming video it will do it again. I'm using F11 with Gnome. How to stop it from happening? No matter how I adjust player's volume, it starts off at maximum level. This is my sound info I'm using:
Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
tell me the maximum limit of connections FTP server
View 2 Replies View Relateddebian 8 64bit
How do I enable louder than 100% in sound settings?
Every time I reboot I have to reset the audio card and run alsaconf. These settings are never saved. How can I get Suse to save these settings?
View 9 Replies View Related10.10 x64. This did not occur before I dist-upgraded from 10.04.I use a USB headset that has always "just worked," as long as I have it selected under both Input and Output in Sound Preferences.Now, periodically I'll hear a pop in my headset, the music/sound will mute for a second, and then come back louder. What's happening is that in Sound Preferences, the default selections are being reset. The sound comes back louder because of my volume settings. Additionally, on boot I run a script to set a few keybindings I use for Ventrilo. When all of this happens, I have to run this script again to get the bindings back.
To fix it, I have to go into sound preferences, select my headset in both Input and Output, fiddle with the volume so it returns to normal, and then rerun my binding script.My first guess was that the headset's connection is "farting", like it'd do a disconnect/reconnect, and Ubuntu deals with it by selecting visible hardware. But I can't for the life of me reproduce it. It just happens randomly.I guess it's possible that the script's issue is related to ventrilo/wine, and not a direct result of this sound issue. I'm mentioning it in case it isn't.I reproduced it by pulling the USB cable out and putting it back in. So there's either a short or Ubuntu is resetting the USB port periodically. Does it drop ports like that?
I am running a dedicated audio PC (Ubuntu 10.04 on Intel Atom 525) with a Juli@ sound card. I had everything set up and working great up until I accidentally pulled the sound card out of its slot while the computer was running. After that, the computer no longer recognized the Juli@ card.
I managed to fix the basic problem by following the Comprehensive Sound Problem Solution Guide- deleting and reinstalling ALSA is what did the trick. The only problem remaining is that the computer no longer remembers the output settings in the Sound Preferences dialog. The setting stays for as long as the computer is on, but as soon as I turn it off and reboot it, the sound output setting reverts back to the internal audio. I tried 'sudo alsactl store 1', but this does not work. Does anyone know how to fix this?
This computer runs KDE4.4, Debian Squeeze, used by my wife who is a complete computer illiterate. Sound is provided by a HDA Intel card with controller with Realtec ALC888 chip. The C200 webcam is connected but not use for sound.When she starts the computer, she is not able to use Skype: the sound is not captured. She is barely able to find KMixer, but when she does, there are 2 input controls shown:- Internal Audio Analog Stereo- Logitech C200 Analog MonoNothing more, no controls, no flags, no way to add any more controls, not even through settings or whatever.
<rant mode>What else did you expect in KDE4. This desktop is famous for oversimplification of settings, making sure that whatever you want o change is not possible thru the GUI. But gets controlled thru KDE anyway in the way you didn't intend.</rant mode>Anyway, when I open alsamixer, not less than 6 capture controls are available:
- Front Mic Boost (level)
- Mic Boost (level)
- Capture (flag + level)
[code]....
Using Dell Inspiron 1564. In windows 7 and other distros like ubuntu, openSUSE sound was perfect. However the sound here is pretty low. Not sure if there's some configuration I am missing. I ran alsaconf, maxed out the bars in alsamixer and did a alsactl store. But the sound is still low.
Code:
# lspci | grep Aud
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
02:00.1 Audio device: ATI Technologies Inc RV710/730
Once I bring up alsamixer, or mixer from menu, how do you save the settings and have them restored next boot so you don't have to always set them again after a re-boot up?
View 1 Replies View RelatedMy system (Ubuntu 9.10 Gnome Desktop) keeps 'forgetting' my sound settings. every day I have to go into sound preferences and select a different hardware device setting and then change it back to the right one in order for it to work. For instance my sound goes out of my onboard intel based sound via optical to my amp and so the hardware setting for this is IEC598 output + analog stereo input But everytime I boot their is no sound (and hence no light coming through the optical cable) so then I'll change it to Analog surround and the light comes out so then I can change it back to the 1st setting and it works again. Hope that makes sense, I have had this problem and also my video settings have been 'forgotten' and samba also won't work ever since about 4 days ago when the system updated, everything was working fine before that (i have run update manager since and everything is up to date)
View 2 Replies View RelatedSince I installed the system-wide equalizer I've been having some problems with my sound system. The problem is it has changed some system settings (visible in gconf) and after I uninstall it, I can't change any sound settings, except the volume in a given application, but the system-wide volume doesn't work, even the tray icon shows three dashes next to the little speaker and the sound settings won't start. I'd like to revert the settings to the original after removing the equalizer, as at this moment I can't change any settings even with the equalizer enabled. Is there any way to reset the sound settings
(I suppose it must be in gconf, but I don't know what the values should be. Currently the musicaudiosink settings are: audioresample ! audioamplify amplification=0 ! pulsesinkv)
Those are the settings that definitely changed after installing the equalizer, but they obviously won't change back after uninstalling it.
Ever since upgrading to Fedora 14, my system has been almost unusable. I can only have a few windows of anything open before I start getting messages about:
Maximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedxwininfo: unable to open display ':0.0'
I am unable to open any new windows then and lots of programs crash.
When things are still running correctly.
A few minutes later:
Jessie 8.2
Cinnamon 2.2.16
Sound settings crash when accessed from cinnamon-settings menu:
Code: Select all$ cinnamon-settings
Could not find bluetooth module; is the cinnamon-control-center package installed?
__init__ took 79.102 ms
(cinnamon-settings.py:3856): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] .....
Segmentation fault
Here is the output when trying to open 'Sound' directly:
Code: Select all$ cinnamon-settings sound
Unknown module sound, using cinnamon-control-center
Could not find bluetooth module; is the cinnamon-control-center package installed?
(cinnamon-settings.py:3877): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] ....
Segmentation fault
I've never been able to get bluetooth working. Installed version is:
Gnome-bluetooth (3.14.0-2)
I have a Debian Sid x86_64 installation on my laptop. I used to use skype a lot when I was on ArchLinux in chrooted 32bit environment. Nowdays, I tried running skype straight on the 64bit environment, when I finally got it running, I couldn't get into sound settings, it froze right when I clicked the Sound options... So I decided to make the 32 bit environment, so I used debootstrap and schroot and now I have fully functional 32bit chrooted system. It does the same thing all over again! it drives me crazy... I should probably tell you, I use pulseaudio. This makes it a little hard to like the distro for me... I used to be an ArchLinux user for quite few years, but I didn't want to solve so many things every day, so I went with debian
View 1 Replies View RelatedHere is some info about my system:
System: Host: notosh Kernel: 3.16-2-amd64 x86_64 (64 bit) Desktop: KDE 4.14.1
Distro: Debian GNU/Linux jessie/sid
Machine: System: TOSHIBA product: Satellite C75D-B v: PSCLEU-003002
Mobo: TOSHIBA model: Portable PC v: MP Bios: Insyde v: 1.10 date: 04/30/2014
CPU: Quad core AMD A6-6310 APU with AMD Radeon R4 Graphics (-MCP-) cache: 8192 KB
Clock Speeds: 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHz
[Code] .....
I've just moved from Ubuntu 9.04 and installed 10.04. I have 5.1 sound set up and selected the Analogue Surround 5.1 in the hardware selection. I'm using on board sound so i have the correct device selected. I have sound but my problem comes when trying to adjust the balance and sub etc. I can move the subwoofer on its own and set the fade on its own but if i try to change the balance the fade moves with it (not always in the same way, sometimes it fades to the rear, some times to the front). Also, when i move the master volume the subwoofer level follows it.Is there a fix for this problem?
Also how can i acquire the sound drivers and settings panel that where in 9.04 if not? will they still be comparable with 10.04?
