I have recorded some video, and now wanted to add some sound.I added a sound track, but when it's playing, I can't hear anything.I'm usually running Jack - for Ardour/Hydrogen etc... - I can't find anywhere in OpenShot to change the Audio to Jack, so assume it's not supported.I have killed Jack in the hope that Alsa will work with OpenShot, but still I have no sound.
View 3 Repliesmy goal is to record video using a canon powershot camera, edit the avi file on my ubuntu 10.04 computer, then upload the rendered file to videos.
problem is that when i cut the video, the audio is no longer in sync with the video, it's off by about 1-2 seconds. this happens with both openshot and pitivi, so i suspect that it's caused by a bug with the codec. (files are avi with mjpeg codec). after searching launchpad, this is apparently a "known issue". that's great but for now i need a workaround.
i do have an old g4 powerbook with imovie hd v6 on it that i can use, but i'd prefer not to because:
1. the powerpc mac is much slower than my new dual core laptop
2. imovie compresses my videos too much so the rendered file is lower quality
3. i simply prefer openshot to imovie
i was thinking of preprocessing my avi files by converting them to another format with a non-buggy codec on linux. i downloaded ffmpeg, but not sure how to use it and what format to use. would mpeg2 be a safe one to use?
I'm using Sound Juicer 2.31.6 to turn CD Audio into digital format for my portable digital audio player.I put in the CD into my disc drive, load up Sound Juicer. I find the track listings on Music Brainz, after having MusicBrainz search FreeDB. But how do I import the track titles into SoundJuicer? I tried "Re-read disc" after entering the name and album exactly as it appears in MusicBrainz, but that doesn't help. It still says "Could not find Unknown Title by Unknown Artist".
View 2 Replies View RelatedI have a video - taken on my mobile phone. In totem, I get sound and video: lovely. However, in Openshot I don't get sounds, and in WinFF it tells me "Unsupported codec (id=7372" for the audio stream. Why, when both are using FFMpeg do the installed codecs work differently in different programs?
View 2 Replies View RelatedI've recorded some video in the field, i.e. outside, windy, noisy, etc. I would like to strip out the audio, clean it up in Audacity and then repatriate it back to the video. Video is in .mp4 format.
View 9 Replies View RelatedI've installed Ubuntu 10.04 and it works like a charm, pretty much all over. However I seem to have problems using my M-Audio Fast Track Pro with all four channels - primarily when using Mixxx. I hate to switch between Win7 and Ubuntu just for the use of my VCI-100. Is there a way to have Fast Track Pro work? I tried almost any of the solutions found around here - but i simply cannot get it to work.
View 4 Replies View Relatedi'm trying to take a mkv file The Tourist which has that cinavia audio track watermarking. i'm trying to convert the DTS audio track to AC3 to avoid it muting my movie on my ps3 while streaming it. I downloaded avidemux GTK+ copied the video and changed the audio to AC3 now when i browse the it says folders on my ps3 the new video file doesn't come up. i also downloaded the mkvdts2ac3.sh when i try to run it it says do you have dcadec installed?
View 1 Replies View RelatedI'm currently on vacation, and noted that the kdenlive version on my laptop (running 64-bit openSUSE-11.3 with KDE-4.4.4) will crash when loading a kdenlive file that has an audio track previously saved.
ie one can no longer reload a project, after saving it, if one has an audio track in the project.
I note my desktop (just before I went on vacation) did not have this behaviour. Has anyone else encountered this?
When I get back from vacation, I'll compare the packages between the two (ie between laptop and desktop). I note these packages on my laptop, which may or may not be relevant.
Code:
kde4-kdenlive-0.7.7.1-1.pm.2.1.x86_64
libmlt++3-0.5.6-1.pm.1.16.x86_64
python-mlt-0.5.6-1.pm.1.16.x86_64
libmlt2-0.5.6-1.pm.1.16.x86_64
mlt-0.5.6-1.pm.1.16.x86_64
sox-14.3.1-1.11.x86_64
ladspa-1.13-3.8.x86_64
I use ubuntu 9.04 and up until this week I could burn CDs using Brasero disc burner without incident. I have partially fixed the problem. I can now use brasero to burn data discs that have wave files for the songs, but when I try to make a audio disc I get this: "Track 1.wav" could not be handled by Gstreamer. I use synaptic and installed some more libs, but to no avail. Should I just install everything in Synaptic for Gstreamer?
View 1 Replies View RelatedI've been having these weird problem with sound after the last few updates. The background music of a ..... video or audio CD playback would be fine, but any vocal/commentary track that contains human voice would be all jumbed up and sounds like you are listening to it from underwater. The volume for the human voice part of the audio would also be a lot lower than the music track.
Not sure what the problem is, and the only way of solving it was through system restore (which actually takes more time than a reinstall). The test sound in YAST sounds fine (well, it's a music track afterall), and most instrumental music on ..... seems to play correctly.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have an ASUS M5A78L-M LX motherboard with ALC887 inbuilt sound. The sound is barely audible unless the speaker volume is all the way up, and then it is very crackly. The BIOS is set up to use AC97 sound instead of HD Audio, which doesn't work either.
I have tried uninstalling and reinstalling ALSA drivers but it didn't really change anything.
Aplay -l comes up with this:
But still very little sound.
i like to know if can extract the audio track from a MP4 file sorry to ask is acc track how to extract it
View 10 Replies View RelatedI received a DVD of my son playing hockey at the Verizon Center in DC. The accompanying audio only comes out of the right channel. I would like to modify it so the same audio comes out of both channels. I have already done some reauthoring (changed the aspect ratio from 4:3 to 16:9). How to modify/edit an AVI to fix my audio issue. Here is a copy of the video on .....: [URL]
View 9 Replies View RelatedWhat is the purpose of hiding the first track when authoring audio-cd?
View 2 Replies View RelatedI recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
Something is wrong with the audio on my laptop, when I used the live CD previously, nothing was wrong. It's all staticy when the base comes on or like a beat (I don't know how to explain it). Even ..... vids and such. My laptop audio is not usually like this.
View 5 Replies View RelatedI recently got a new audio interface, which is working perfectly on ubuntu 10.04 i just plugged it in and it worked without any tinkering! the interface is a lexicon omega which is fully supported under alsa. The problem is that for some reason it's not working on ubuntu 9.04 (which is where were most of my work currently is so occasionally i still have to use 9.04 as i don't have all of the same software installed on 10.04).
Jack seems to detect it properly in both 9.04 and 10.04 as it is listed in "interfaces". But it does not show up in "Volume Control Alsa Mixer" so I cannot select it from the drop down list.
So currently I have no sound (just in case you weren't able to decipher that from my primitive ubuntu-speak above )
Here's the output of cat /proc/asound/cards
Code:
I'm having some troubles with my soundcards. I have a Audigy ES PCI soundcard and I just recently bought an M-Audio Audiophile 24/96 soundcard and at the moment I have both of them installed. I'm dual booting w/ Windows xp and I need the Audigy in Windows for gaming and because of the mic input that the M-Audio doesn't have.
First when I installed the M-Audio only Amarok (and probably other 'Phonon' apps) worked but I had no sound in mplayer, xine etc. With some googling I found a way to make the M-Audio card the primary card for Alsa and now mplayer & xine work fine too. M-audio 24/96 uses the module ice1712.Today I noticed I don't have sound in flash player (I use opera, but tried firefox too), and the (alsa?) command aplay won't play any .wavs. Flash sounds used to work okay with only the Audigy installed. I have tried to reinstall the flash player.Aplay -l :
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: M2496 [M Audio Audiophile 24/96], device 0: ICE1712 multi [ICE1712 multi]
[code]....
Well I installed Ubuntu 10.10 64Bit along side Windows 7, and I've been unable to get any sounds working, apart from the log on sound. So I tried installing some drivers, and now there is no sound at all, and no sound devices show up in System-Preferences-Sound-hardware
I'm using the on board HD Audio (ALC 889A) and using the optical Audio out for 5.1 Surround sound.
I've tried just using the Stereo ( Green Jack ) out, and still nothing. The suggestions on the on the Ubuntu site, and the following post didn't seem to work either.
[url]
I Can't find a great deal of posts with the Realtek HD audio.
I have installed the Ubuntu 10.04 LTS on a Acer Aspire 4520 laptop and I can't get sound. I try to update alsamixer without any positive results. How can i get sounds on my laptop?
View 4 Replies View RelatedI have an Creative Labs CA0106 Soundblaster and all I hear is static I cant seem to find anyway to get it to work. I'm new to ubuntu.
View 1 Replies View RelatedI'm running Ubuntu 9.10, but so far I've been unable to get sound to work. I know my sound card is Realtek, because I've had to install the HD Audio Codec Driver when I was on Windows. I downloaded the driver for Linux and it is currently sitting in my home folder. When I tried to Code:sudo ./installthe driver, it failed for the following reason:
Code:
WARNING!!! The mixer channels for the ALSA driver are muted by default!!!
**************************************************************************
[code]....
I seem to be having some audio clashes. I use Exaile to play music (if that matters), and after I play music, no sound comes out of videos (not just Ubuntu, it won't work from Yahoo or MSN videos either). Then when I try to go back to playing my music on Exaile, no sound will come out of that. Likewise, if I restart the computer... the sound works again. If I instead watch a video first, there will be sound -- but as soon as I try to play music from Exaile, nothing comes out.
View 6 Replies View RelatedI was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
I'm pretty much an Ubuntu noob and I'm about to give up. I've spent hours reading tips and tricks to get this sound card working but I usually end up making things worse. This will be my last attempt
- onboard sound is disabled in BIOS
- Delta 1010LT is recognized
- fresh Ubuntu 10.04 32bit install . . . everything is default.
- I know how to access the terminal and for argument's sake, let's say that's it. I need step by step.
I tried to remove all instances of pulse audio in the past and it removed the desktop as well. Talk about frustrating. Ok, so here I am. Fresh install, no sound and I haven't touched a thing.
Cannot hear any sound from the system
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 0/1
Subdevice #0: subdevice #0
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
i just installed a new Ubuntu 10.10, but i have no sound at all. I google-d for my problem, but i cant find any fix. In sound preferences - everything look great and working - there is my X-fi Xtreme audio CA0110-IBG, and i can choose how many channels to use, but when i go to test button, there are no sound from any channel. I got 5.1 sound system, and i use Flexijack for mic. Im confused, because everything looks like working - the system recognises my sound card, but there no sound at all. I tried to kill pulseaudio, but it not help me.
View 8 Replies View RelatedRecently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem:
- I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600).
- I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.