I recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have just upgraded to Fedora 14, with some hope that a F13 kernel crash issue would be resolved. Alas, not, and I have lost audio in one of my sound cards. I am using 2 sound cards in my computer. The first one (VT 1708 on the M2V MX SE motherboard) is used for FLDIGI (ham radio program). The other one (Creative Labs SB Live!) is tied to a speaker/microphone. At some point in mid 2010, I started getting kernel crash reports (not sure which kernel version this started), and the VIA VT 1708 audio controller stopped working. The SB Live! card works fine.
From mesg, I get:
[9.181148] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[9.181186] [<c05c36ad>] ? pci_ioremap_bar+0x2c/0x5b
[9.181194] [<c05c36ad>] pci_ioremap_bar+0x2c/0x5b
[9.181299] ALSA sound/pci/hda/hda_intel.c:2510: ioremap error
I've just pulled out the SB LIVE! card to see if it is causing the VT 1708 controller to fail...there appears to be no interaction.
From lspci -v, I get:
20:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 8290
Flags: fast devsel, IRQ 17
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel modules: snd-hda-intel
So it seems to know it's there. How to get my sound back (and get rid of this kernel crash every time I start my computer)?
My audio worked completely perfectly running Fedora 14. I upgraded to Fedora 15 and discovered my audio no longer worked. As far as I know I didn't change anything. I do hear random pops and clicks from my speakers every few seconds. It's a bummer because this worked out of the box on Fedora 14 without any screwing around, and now it's totally broken in fedora 15. Everything else about my upgrade has been going pretty well, but life without sound is not nearly as fun and it's frustrating to have something not work that used to work just fine.
Here is some information and things I've tried:
- Just for grins I booted from the Fedora 15 live CD and observe the exact same issue as I see when I boot from my HD (just pops and clicks out of the audio.)
- motherboard: ASUS M4A88TD-V EVO/USB3 (using onboard audio)
- lspci reports: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
- cat /proc/asound/card0/codec#0 | grep -i codec reports: Codec: Realtek ALC892 (this is what the motherboard manual lists as the audio hardware.)
- I've run pavumeter as some have suggested and I see outputs on both left/right channels when audio is playing (but still hear nothing but clicks and pops.)
- I've run "alsamixer -c 0" and verified all my levels are maxed out.
- I've opened up the sound settings dialog box and made sure the correct hardware device is selected, tried different profiles, tested left/right speakers, still no progress at all.
- I know I have the speakers on and plugged into the correct output jack, but just for fun I tried plugging the speakers into each of the other possible jacks, but that didn't help.
- lsmod (fedora 15) reports:
I upgraded to a new(er) soundcard this morning on my Slack 13.1 desktop box. I ran alsoconf and got sound working in everything but Firefox flash. It's not specifically a flash problem; flash sound works just fine in Konqueror. It's a Firefox issue. I created the following login script in order to try and force the new card to be recognized as the default:
Code:
bash-4.1$ cat .asoundrc
pcm. !default {
type hw
card 1
} ctl. !default {
type hw
card 1 }
I have an ASUS M5A78L-M LX motherboard with ALC887 inbuilt sound. The sound is barely audible unless the speaker volume is all the way up, and then it is very crackly. The BIOS is set up to use AC97 sound instead of HD Audio, which doesn't work either.
I have tried uninstalling and reinstalling ALSA drivers but it didn't really change anything.
Aplay -l comes up with this:
But still very little sound.
Something is wrong with the audio on my laptop, when I used the live CD previously, nothing was wrong. It's all staticy when the base comes on or like a beat (I don't know how to explain it). Even ..... vids and such. My laptop audio is not usually like this.
View 5 Replies View RelatedI recently got a new audio interface, which is working perfectly on ubuntu 10.04 i just plugged it in and it worked without any tinkering! the interface is a lexicon omega which is fully supported under alsa. The problem is that for some reason it's not working on ubuntu 9.04 (which is where were most of my work currently is so occasionally i still have to use 9.04 as i don't have all of the same software installed on 10.04).
Jack seems to detect it properly in both 9.04 and 10.04 as it is listed in "interfaces". But it does not show up in "Volume Control Alsa Mixer" so I cannot select it from the drop down list.
So currently I have no sound (just in case you weren't able to decipher that from my primitive ubuntu-speak above )
Here's the output of cat /proc/asound/cards
Code:
I'm having some troubles with my soundcards. I have a Audigy ES PCI soundcard and I just recently bought an M-Audio Audiophile 24/96 soundcard and at the moment I have both of them installed. I'm dual booting w/ Windows xp and I need the Audigy in Windows for gaming and because of the mic input that the M-Audio doesn't have.
First when I installed the M-Audio only Amarok (and probably other 'Phonon' apps) worked but I had no sound in mplayer, xine etc. With some googling I found a way to make the M-Audio card the primary card for Alsa and now mplayer & xine work fine too. M-audio 24/96 uses the module ice1712.Today I noticed I don't have sound in flash player (I use opera, but tried firefox too), and the (alsa?) command aplay won't play any .wavs. Flash sounds used to work okay with only the Audigy installed. I have tried to reinstall the flash player.Aplay -l :
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: M2496 [M Audio Audiophile 24/96], device 0: ICE1712 multi [ICE1712 multi]
[code]....
Well I installed Ubuntu 10.10 64Bit along side Windows 7, and I've been unable to get any sounds working, apart from the log on sound. So I tried installing some drivers, and now there is no sound at all, and no sound devices show up in System-Preferences-Sound-hardware
I'm using the on board HD Audio (ALC 889A) and using the optical Audio out for 5.1 Surround sound.
I've tried just using the Stereo ( Green Jack ) out, and still nothing. The suggestions on the on the Ubuntu site, and the following post didn't seem to work either.
[url]
I Can't find a great deal of posts with the Realtek HD audio.
I have installed the Ubuntu 10.04 LTS on a Acer Aspire 4520 laptop and I can't get sound. I try to update alsamixer without any positive results. How can i get sounds on my laptop?
View 4 Replies View RelatedI've upgraded my computer to 9.10. There is no audio output. I don't hear the quirky little sound when I boot up. There is no playback of my music library using mplayer or vlc. There's no audio from Hulu or the TV network's direct sites. I've enabled pulse audio -- I found a reference to it in someone else's post. Medibuntu is loaded and the codecs downloaded.
View 4 Replies View RelatedI have an Creative Labs CA0106 Soundblaster and all I hear is static I cant seem to find anyway to get it to work. I'm new to ubuntu.
View 1 Replies View RelatedI'm running Ubuntu 9.10, but so far I've been unable to get sound to work. I know my sound card is Realtek, because I've had to install the HD Audio Codec Driver when I was on Windows. I downloaded the driver for Linux and it is currently sitting in my home folder. When I tried to Code:sudo ./installthe driver, it failed for the following reason:
Code:
WARNING!!! The mixer channels for the ALSA driver are muted by default!!!
**************************************************************************
[code]....
I seem to be having some audio clashes. I use Exaile to play music (if that matters), and after I play music, no sound comes out of videos (not just Ubuntu, it won't work from Yahoo or MSN videos either). Then when I try to go back to playing my music on Exaile, no sound will come out of that. Likewise, if I restart the computer... the sound works again. If I instead watch a video first, there will be sound -- but as soon as I try to play music from Exaile, nothing comes out.
View 6 Replies View RelatedI was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
I'm pretty much an Ubuntu noob and I'm about to give up. I've spent hours reading tips and tricks to get this sound card working but I usually end up making things worse. This will be my last attempt
- onboard sound is disabled in BIOS
- Delta 1010LT is recognized
- fresh Ubuntu 10.04 32bit install . . . everything is default.
- I know how to access the terminal and for argument's sake, let's say that's it. I need step by step.
I tried to remove all instances of pulse audio in the past and it removed the desktop as well. Talk about frustrating. Ok, so here I am. Fresh install, no sound and I haven't touched a thing.
I have recorded some video, and now wanted to add some sound.I added a sound track, but when it's playing, I can't hear anything.I'm usually running Jack - for Ardour/Hydrogen etc... - I can't find anywhere in OpenShot to change the Audio to Jack, so assume it's not supported.I have killed Jack in the hope that Alsa will work with OpenShot, but still I have no sound.
View 3 Replies View RelatedCannot hear any sound from the system
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 0/1
Subdevice #0: subdevice #0
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
i just installed a new Ubuntu 10.10, but i have no sound at all. I google-d for my problem, but i cant find any fix. In sound preferences - everything look great and working - there is my X-fi Xtreme audio CA0110-IBG, and i can choose how many channels to use, but when i go to test button, there are no sound from any channel. I got 5.1 sound system, and i use Flexijack for mic. Im confused, because everything looks like working - the system recognises my sound card, but there no sound at all. I tried to kill pulseaudio, but it not help me.
View 8 Replies View RelatedRecently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem:
- I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600).
- I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.
I can't seem to get my computer to record the audio from an application... Sound Recorder, Audacity, and outRec all output files but they are just silence, even though when I see them in a media player they show the visualizations. I have followed a couple guides to no avail.
View 4 Replies View RelatedUbuntu 10.10
External slimline HP cd/dvd combo drive
No other optical drives on system
I am having a problem ripping or playing audio CDs on my drive. DVD movies work fine on this drive, but audio cds will not show up in Rhythumbox nor SoundJuicer. Oddly, they will play in VLC.
I wish to rip music to my hard drive. When launching Sound Juicer, I receive the error "no CD-Rom drives found".
I'm trying to record music playing on my computer with the sound recorder/audacity but there is nothing audible being recorded. I've installed PulseAudio Volume control and selected monitor of internal analog stereo. I can't figure out if I have an output/input incorrectly selected but maybe someone could take a look at the screenshots and provide feedback! I have a dell xps 8100
View 2 Replies View RelatedI've upgraded Ubuntu 10.04 to Ubuntu 10.10 yesterday and I'm experiencing some issues now.
Audio is out of sync for all videos I'm trying to watch in VLC (sync was 100% fine in Ubuntu 10.04).
following chained updates of my music server from 10.04 to 11.04 I no longer have any sound, which is sort of bad for a music server...Primary soundcard in the setup is USB So I tried the command posted in various "no sound" threads
sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-`uname -r` linux-ubuntu-modules-`uname -r` libasound2
Which reinstalled stuff as expected, except had this error in the output: Couldn't find any package whose name or description matched "linux-ubuntu-modules-2.6.38-8-generic" Could the error be because of backports?
aplay -l helpfully reports aplay: device_list:240: no soundcards found.
and the output from
wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
can be viewed here:
http://www.alsa-project.org/db/?f=cb...54c3f65b70dec7
i just installed 11.2 and i do not get any audio from flash movies (e.g. videos). (startup sound and amarok work ok). interestingly i do manage to get sound out of flash in a particular circumstance:
* i install 11.2 from the livecd using default settings.
* at the end of the process i log in as a normal user
* in a console as super user i run "zypper install flash-player"
* flash-player and nspluginwrapper get installed (nothing else)
* i start firefox and i am able to play flash movies with sound from videos
* i reboot and log in as a normal user
* i start firefox and now flash movies from videos play without sound
I upgraded to Ubuntu 9.10 recently to find that my computer will not play mp3 files in Rythmbox, Amarok, or Kaffeine media players. All of the FLAC files I have ripped from CDs work, but no mp3 files work. I have downloaded and installed the ubuntu restricted codecs from Synaptic as well as the codecs prompted by Rythmbox rebooted, and still no result.Like I said, the .FLACs play fine.On another note, no sound is being transmitted to my earbuds. The only sound will come from the laptop speakers.
View 4 Replies View RelatedI recently received my new multimedia laptop - an HP Dv7. I proceeded to install Ubuntu 9.10 on it and I've had no end of troubles with the sound card including, muffled sound - seemingly only coming from the LFE channel, only stereo controls in pavucontrol, failure to send sound out the HDMI port, headphones not working and not cutting of the speakers when the headphones are plugged in.
I believe that all of this will be solved if I get the appropriate driver for my card. I have searched around and sound in particular has tons of posts from many people all with slightly different problems, solutions and hardware. None of the solutions seem to be working. Also I just tried booting from the live CD and the sound is the same - no 5.1 and just muffled sound. I think my sound card is just too new and there doesn't exist a proper driver for it yet.
Here's what I get with lscpi:
Code:
% lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
01:00.1 Audio device: nVidia Corporation Device 0be2 (rev a1)