I have a bunch of videos that I would like to adjust the volume to be the same on all of them. I have searched and all i can find is how to normalize the volume with in the video. I have tried this and it works great on movies where the action is louder that the talking. My problem is on video is a lot louder than another so im constantly changing the volume when a new video starts.
View 4 RepliesI am running debian linux wheezy, and recently, all of a sudden, all videos in my iceweasel browser have been refusing to play videos of any kind at full volume. I am, however, able to download the video and play it at full volume on vlc player or sytem video player.Why iceweasel is acting this way?
View 0 Replies View RelatedSince I installed Lucid, anytime I watch a video in Firefox I can't adjust the volume. I click on the little volume icon, and the volume meter pops up, but it won't let me change it.Also, I can't change to a different point in the video.And finally, it won't go full screen when I click on the fullscreen button.
View 1 Replies View RelatedI've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies View RelatedI'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies View Relatedsince using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies View RelatedMy volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies View RelatedDebian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies View Relatedlately while converting video to dvd with ffmpeg or devede, watching multiple videos online, or restarting dbus from command, my laptop freezes and cannot recover. i simple have to do a hard shutdown and restart the laptop. sometimes when it freezes, the and hdd led will steadily blink once per second.
View 9 Replies View RelatedA good video converter software for openSUSE to covert videos into multiple formats.it will be easy if it ask me to covert videos for a specific device like i-pod,Nokia,Samsung mobiles.
View 9 Replies View RelatedI'm new to LVM. I use Red Hat and CentOS 5. I'm setting up a database server and I want to setup the local drives for performance. My plan is to have three storage locations, 1st for Linux, 2nd for the application, and 3rd for the data files. Each location will be appropriately redundant. The OS and application drives will be local. Because my goal is to dedicate one spindle for the OS and another for the application, is there a best practice that would say I should create two LVM volume groups.
Each with one logical volume associated with one of the physical partitions or one LVM volume group with two logical volumes each associated with one of the physical partitions? I've read that a physical disk can only belong to one volume group. So if I want to add 70GB to both logical volumes, I could add a single 140GB drive to a single volume group and then add half to each logical volume. If I have two volume groups, I would need to add two additional disks. I may be missing an obvious consideration or be missing a basic concept of LVM.
I am not familiar with LVM at all, although I have successfully got it up and running in Slackware. What I would like to know is, could I create one Volume Group in a Physical Volume consisting at the moment of just one disk, and install separate Linux releases into Logical Volumes in this solitary VG? So, for example:
/dev/sda1 = Physical Volume
volgroup = Volume Group
lv01-root = Slackware root
[code]....
How to create multiple Logical Groups out of a single Physical Volume? Here is the Physical Volume I have created:
Code:
# pvdisplay
--- Physical volume ---
PV Name /dev/sda9
VG Name myVG1
PV Size 54.88 MB / not usable 2.88 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 13
Free PE 11
Allocated PE 2
PV UUID bon4Ao-vmgC-aP1h-EC9X-w3tN-YXNu-0N2dAw
This is how I am creating a Logical Group out of the above Physical Volume:
Code:
# vgcreate myVG1 -s 4m /dev/sda9
Display:
Code:
# vgdisplay
--- Volume group ---
VG Name myVG1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 5
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 52.00 MB
PE Size 4.00 MB
Total PE 13
Alloc PE / Size 2 / 8.00 MB
Free PE / Size 11 / 44.00 MB
VG UUID O6ljYC-bflz-EUTd-nf34-8gYe-Fh39-Bh3cOg
But I am unable to create one more Logical Group out of this Physical Volume. Can we accomplish it? Or do we always extend our current Logical Group to utilize the available space of a Physical Volume?
We are working on a project to create a display wall of 8 monitors arranged as 2 high by 4 wide. Each monitor is connected to a single machine and all machines are networked with a master machine with its own, seperate monitor.
Our goal is to get the 8 machines to share a single desktop, with the master machine acting as the server. We have looked at using Xinerama or NMM, but we are unsure about how to get started configuring the multi-machine, multi-head display.
i want to be able to convert videos into mp4 videos of resolution 320*240 and frame rate 25ps so that i will be able to play them in my phone..any video converter that can do this job for me?
View 6 Replies View RelatedI can get all the utube videos other website videos , but no BBC videos using U 9.10 and Opera 10.10. They work with FF or Using Opera in Fedora it works fine. I have all the usual Gstreamers, restricted extras/flash player etc. I read just about every post I can but see nothing I do not already have.
View 9 Replies View RelatedI cannot get AVI videos to play with the Totem movie player that comes bundled with Ubuntu 8.04 on the Dell Mini 9. I keep getting: "Could not determine type of stream." Randomly, one or two of the dozen or so videos on my SD card will work, but most will not. This is very frustrating because all the videos I download are always in AVI format.
I tried used the synaptic package manager find an alternative player and tried MPlayer, but that didn't do anything. I'd just get a blank screen on everything. Using the tutorial in this forum, I got GNOME Mplayer, which also didn't work, but even a video that worked with Totem would only play audio with GNOME Mplayer.
I looked in the repository for video codec updates but didn't see any. What do I do? Is there like a Winamp for Linux? This is a total bummer. I just want to play AVI files that are so commonly used for video.
I'm trying to find a program where I can edit some hd mkv files. I want to cut pieces of them out and put them together. I was using avidemux but when I went to save it again it said I needed the start point to be a keyframe. It allowed me to save it as an avi, but the color was distorted. I am fine with using avidemux if I can get around this keyframe problem.
View 3 Replies View RelatedI have an issue with my Ubuntu both 9.10 nad 10.04.I had the video worked perfectly untill yesterday but now i can see the video hear the noise (cars, music) but no voice of human.
View 9 Replies View RelatedI had system problems and I decided to do a fresh install and I could only save my home folder and be sure that my system worked. Ever since my new videos never had thumbnails. Is there any way to make sure they do have thumbnails for easy browsing.
View 1 Replies View Relatedi have an n86 and i am a new ubuntu user. i have been trying to convert some videos and have been unable to find a suitable software.
View 2 Replies View RelatedI have used ubuntu for a long time but always using either a live CD or my Flash stick.
On past Thursday i decided to install ubuntu on my laptop and i did it . It is light and healthy (ha ha). Any way, I would like to play AVI, MKV, RMVB, and MP4 videos but i couldn't. I tried a lot of debian packages and drives (i.e. files with .deb extension) but no result except installing RealPlay that i am using it to play mp3 files only.
can you give me some packages to play those files. (I can't connect my laptop to Internet for the time being). In addition, I have Huawei E1750 USB Modem but the system does not recogize it. Is there any way to play those videos and surf the net using the modem in UBUNTU 10.04 LTS.
i just want to know what is best to convert in linux ubuntu 10.04LTS to convert videos!?
View 9 Replies View RelatedI've been trying to convert flv videos to MP4 so that I can load them onto my iPod Classic 160 G (video).
So far no program has successfully converted an flv file to a usable mp4.I've tried Avidemux (both gtk and qt), Kdenlive, WinFF, Mobile Media Converter, DownloadHelper (FireFox addon) Tragtor and of course the King of them all- FFMPEG. Not one of the previously mentioned programs has successfully and consistently converted an FLV to mp4 for my ipod.
It could be that I'm doing something wrong with FFMPEG or don't have the correct codecs (whatever the heck they are?!) installed or that I voted for McGovern in '68. The "help" from FFMPEG both IRC and their obnoxious email list is beyond deplorable.
Anyway, I need to know a reliable and consistent way to turn flv or any other videos into an MP4 format that will run on my iPod. The program must reside on my machine and not some online converter service. If I have to use FFMPEG (which I understand most programs use as their core) I need to know how to do it....and for God's sake don't tell me to read the online documentation at FFMPEG..
My Dad who I have just gotten on to Ubuntu is wanting to burn some some avi videos onto a DVD, but wants them in a DVD format though so that he can play them on any type of dvd player. I got him to install k3b and try that but as I've never had to do this I'm not sure my self how to do it so this leads me to ask;
View 5 Replies View RelatedI have some 10hrs videos with around 6GB in size. Unfortunately avidemux2_cli runs into problems copying certain parts of it into an output file (frames get blur).
So I tried ffmpeg, but even if I use the sameq switch (same quality as source video), the output video is not a 1:1 copy of the source video. In fact the output video is encoded again (and sound is not as in the source video) and that takes ages against a copy activity by avidemux. Is there any other cli program for simply copying parts out of videos?
I've got an eeepc 1101ha and have installed the latest ubuntu, 10.10, but i can't watch any videos! Besides the original player, i have installed and tried to watch videos in VLC, SMPlayer and GNOME MPlayer but it has always some kind of error. In VLC I can hear the sound. On all others the file simply doesn't work.
View 5 Replies View Related