Ubuntu Multimedia :: Pinnacle PCTV HD Usb Does Not Work?
Feb 6, 2010
I followed the instructions here:
[URL]
And my system would not pick up a signal at all or show any channels after scanning. But, just as proof that the system detects the device, my Virtualbox shows this device (it's name and the fact that it is a tv tuner) as one of the available USB devices when it is plugged in. (I am not saying I want to use the usb stick with Virtualbox but only that the computer recognizes it and knows what it is and can even name it correctly).
I have found and never gotten even the slightest response from the usb stick. There is never any picture or channels scanned. This is true whether I am using tvtime or kaffeine or me tv.
Both tvtime and me tv say that only dvb is supported when I try to scan for channels.
So, anyway, using the link that I gave above, I got to the point where I downloaded the drivers from here:
[URL]
and what I got was a tarball. So I extracted it to my desktop and then changed directories in a terminal to the folder that was on my desktop and then I ran make and then I ran make install. And then I rebooted.
Well... still nothing. Neither Kaffeine nor tvtime nor me tv will detect any channels nor will any picture appear and they all say that I am lacking some kind of dvb support/driver whatever.
View 9 Replies
ADVERTISEMENT
Feb 4, 2010
Does th Pinnacle 300i PCTV works under ubuntu (and mythbuntu)?
View 7 Replies
View Related
Jun 9, 2011
I want to watch tv with my usb tv tuner Pinnacle pctv hybrid pro on Fedora 15 64bit.The best i could do is watch analog tv without sound at all ! or watching digital tv but without the ability to change channels ! i need to press the stop button and then choose my channel and hit play again. If i tried to change chanell it stuck . [URL] Its a quality tvtuner and i would like to use it.PS1: I was completely crazy testing the Fedora 15 64bit , gnome UI was so fantastic, fedora was so fast not like the ubuntu fatpig. Im so decided to format my harddisk and install only fedora.
View 1 Replies
View Related
Sep 1, 2011
I'm using natty. is there any way to get a Pinnacle DVC 101 to capture video from composite source on Ubuntu Natty? it seems that when new releases break functionality they often are never fixed.
I'm also unaware of a simple GUI application to use in order to capture the video. It would need start and stop features.
View 3 Replies
View Related
Oct 4, 2010
I am trying to get a Pinnacle 800e USB ATSC digital TV tuner working in 64-bit Lucid. I followed the 800e wiki for extracting the firmware file that needs to be in /lib/firmware, so dmesg output recognizes it without errors just like shown in the wiki. No idea what modules it should use, but seem to be loaded:
Code:
Module Size Used by
lgdt330x 9070 0
[code]....
View 2 Replies
View Related
Dec 28, 2010
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
View 1 Replies
View Related
Jul 21, 2010
We are the group of technical support, 1 of the school her in Iloilo City, Phillippines. since I'm in the team we are using window OS along our journey, we discovered that we are using a pirated version of window OS, last march 2010, we change to linux (ubuntu) exactly. I have problem about my capture card that using I could not find the driver.
View 2 Replies
View Related
Apr 24, 2010
I have a pinnacle callisto video capture card which I am having trouble getting to work.
lspci
lsmod - notice that the saa7146 module is not loaded. If loaded manually the card is still not found.
Dmessg does not show the card.
View 2 Replies
View Related
Feb 17, 2011
how to make creative web cam working with ubuntu
View 1 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
Apr 8, 2011
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
View 3 Replies
View Related
Mar 19, 2010
Is there a way to allow the multimedia keys to function while the system is locked?
View 2 Replies
View Related
Jan 22, 2010
I have a entire library from my winXP days and theyre all mp3's but banshee and rythmbox wont play them! Do I need a codec or something?
View 3 Replies
View Related
Nov 11, 2010
I have an older computer running Ubuntu 8.04.4 LTS. I installed Ubuntu-restricted-extras and that seemed to get audio support working well. But how to get DVD support working?
I used the "sudo apt-get install libdvdread4" command which I use to get DVD support working in 10.xx but it returned with "E: Couldn't find package libdvdread4". I'm guessing there is a different way to do this in 8.04?
View 3 Replies
View Related
Jan 7, 2010
my sound card wont play .ogg files! that means i cant use alot of the sounds that ubuntu comes with and i cant use programs like LMMS and Hydrogen properly.
View 4 Replies
View Related
Jan 31, 2010
I have tried to install vlc on my ubuntu 9.04. Initially all went fien, vlc was here and did work. I tiried to uniinstall, then install again, still no cure. what went here wrong? And how to correct all?
next time I tried to run it, nothing happened, no process of vlc could be found and so I tried to start it form cmd with following results:
Code:
(<unknown>:5056): Gtk-CRITICAL **: gtk_widget_realize: assertion `GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(<unknown>:5056): Gtk-CRITICAL **: gtk_widget_realize: assertion `GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(<unknown>:5056): Gdk-CRITICAL **: gdk_pango_context_get_for_screen: assertion `GDK_IS_SCREEN (screen)' failed
[Code]....
View 1 Replies
View Related
Feb 5, 2010
I just installed ubuntu on top of my windows xp on my laptop. I've got all the files I need to play mp3's i think. I'm using rhythmbox music player and the track play but I get no sound. Is there a better mp3 player out there?
View 2 Replies
View Related
Mar 4, 2010
I seem unable to get a movie dvd to work in version 8.04 LTS (with all the latest updates). All I get is a message telling me that there is an error. I've installed the GStreamer plugin but still no go.
View 4 Replies
View Related
Mar 25, 2010
how do i get the sound to work in ubuntu 9.10?
View 3 Replies
View Related
Apr 17, 2010
I bought touchscreen 0.4 with usb hub to connect to camera port.I at last put it together and into my asus eee 900. I had to swich wires from 1-2-3-4 to 4-3-2-1 since camera connector (USB interface) is switched. I tested all this stuff on usb adapter. When i was testing it (before i put it inside) i checked many times when green light blinks on touch - i belive there is everything all right. So it came to install it on ubuntu.I compiled two or three kernel with modules and built in egalax driver, tried egalax installer and other things, but i still can not get it to work.Tried TKCalc, tried few ways in xorg but it does not work. My xorg tries:
Code:
san@eeepc:~$ sudo nano /etc/X11/xorg.conf
[sudo] password for san:
[code]....
View 3 Replies
View Related
May 1, 2010
My laptop has a S-video TVOUT which I would like to use to show content on my tv. After plunging through a lot of documentation I can't get it to work.
Some config:
root@pluim-nielsen-laptop:~# xrandr --verbose
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
LVDS1 connected 1280x800+0+0 (0x43) normal (normal left inverted right x axis y axis) 331mm x 207mm
Identifier: 0x41
Timestamp: 6237460
Subpixel: horizontal rgb
[Code].....
View 1 Replies
View Related
May 3, 2010
I can't seem to get my microphone to work on Ubuntu 10.04. I have a Creative Sound Blaster Audigy SE PCI sound card. [URL]... Sound card is recognized by System/Preferences/Sound/Hardware as CA0106 Sound Blaster 1 Output / 1 Input Analog Stereo Duplex And sound output works 100% perfectly. I Google'd for hours and did not see anything to fix my microphone. My computer has front headphone and microphone ports and the front headphone port works fine but microphone does not. Also I tried plugging microphone into all the ports on the back into sound card but none worked. Also, I ran alsamixer from terminal and maxed out all volume settings. I wish to get the microphone working so I can play Counter Strike Source with Wine. I am willing to buy another sound card if someone can point out a replacement.
View 9 Replies
View Related
May 5, 2010
My sound card is an HT Omega Striker, and it worked fine with 9.04. I did a fresh install of 10.04 and I can't get optical/SPDIF/IEC958/whatever to work. I only use the optical out (mostly with Rythmbox, if that matters). I know I had to enable IEC958(?) on 9.04 to get it working, but that didn't work this time around. The sound card is found fine, so this is really pissing me off.
card 0: CMI8762 [C-Media CMI8762], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
[code]....
View 2 Replies
View Related
May 12, 2010
I'm using Wubi to dual boot 9.10 off windows xp. I have been having very good luck figuring things out using this ubuntu forum, which I am more grateful for than any of you could ever imagine, But I have a webcam issue I just can't figure out. Heres my question. I just recently bought a VERY cheap usb webcam from a company named HDE. There doesn't seem to be a specific name or even model number for this webcam, but here is the web page of the webcam I bought, http://www.hdeshop.com/USB-3-LED-PC-...B0015TJNEY.htm The website only provides drivers for windows vista and windows xp, but I figured there might be a chance or possibility that I could force this webcam to work on ubuntu 9.10. I plugged in the webcam and it did show up in skype, but the picture is all green and there is a double of me.
Plus, the actual webcam device will not show up in skype, I can't select the webcam, but regardless it still shows a green double vision image when I test it or do a video call.Skype seems to be the only thing this webcam kind of works with, It will not work with Cheese though and doesn't show an image in gstreamer. I want to mention that when I go to Cheese Preferences there is a webcam device that appears and sayse "USB 2.0 Camera (/dev/video0)" but I can't select it. I'm not sure what to do about this or how to fix it? I've searched around the internet and read the ubuntu documentation on webcams but really haven't had any luck for my specific webcam. I would just like the webcam to be detected by ubuntu 9.10, to work properly in skype, and work in cheese so I can record video's.
View 1 Replies
View Related
May 12, 2010
I just recently bought a VERY cheap usb webcam from a company named HDE. There doesn't seem to be a specific name or even model number for this webcam, but here is the web page of the webcam I bought, http://www.hdeshop.com/USB-3-LED-PC-...B0015TJNEY.htm The website only provides drivers for windows vista and windows xp, but I figured there might be a chance or possibility that I could force this webcam to work on ubuntu 9.10.
I plugged in the webcam and it did show up in skype, but the picture is all green and there is a double of me. Plus, the actual webcam device will not show up in skype, I can't select the webcam, but regardless it still shows a green double vision image when I test it or do a video call. Skype seems to be the only thing this webcam kind of works with, It will not work with Cheese though and doesn't show an image in gstreamer. I want to mention that when I go to Cheese Preferences there is a webcam device that appears and sayse "USB 2.0 Camera (/dev/video0)" but I can't select it. I'm not sure what to do about this or how to fix it? I've searched around the internet and read the ubuntu documentation on webcams but really haven't had any luck for my specific webcam. I would just like the webcam to be detected by ubuntu 9.10, to work properly in skype, and work in cheese so I can record video's.
View 9 Replies
View Related
May 17, 2010
I get no output from speaker-test, nor any other program I run to try and produce sound.
Some info:
lspci -v:
aplay -l:
alsamixer:
uname -a:
Linux rweinber-desktop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux
Apt-get reports that I am as up to date as it is possible to be.
View 4 Replies
View Related
Aug 1, 2010
I cannot get my sound to work, I've looked around on the threads, but nothing as helped, but that could also be because I'm new at this.. Anyways, the thing I find weird about it is when I started it up, I could hear the startup noise of Ubuntu, but I can't hear anything else.
View 2 Replies
View Related
Aug 10, 2010
I've been trying to learn how to record my guitar parts onto Audacity using my Pod XT.I've always used Audacity to do my audio recordings since its much more user friendly than Ardour and just as capable IMO.However, I cannot get Audacity to work with the Pod.I downloaded the "line6-usb-source" using apt-get.Ubuntu seems to recognize the Pod and get a signal just fine (when I go to "Sound Preferences" it allows me to select the Pod XT as input hardware and even shows an incoming signal).When I go to Audacity's preferences,it allows me to select the Pod as the "Recording Device", however when I go to record it gives me an error saying to check the Project Sample Rate.
Does the Pod not output at 44100 Hz?Is there a way to change the sample rate the Pod puts out?Is there another setting in Audacity I need to adjust?I do not want to wine or emulate anything.I feel I shouldn't have to use a specific audio recording software to use a piece of a hardware I paid good money for.
View 1 Replies
View Related
Oct 4, 2010
I can't get my microphone to work with ubuntu/alsa....
View 3 Replies
View Related
Oct 11, 2010
I recently bought a new geforce 220 gt and I'm using ubuntu 10.04 with the proprietary driver. I can't get access to the nvidia-glx program through nvidia-glx-185 because my card needs nvidia-glx-195 and the launchpad repo that supplied that deb has now removed it.
My question is would it just be easier to the the open source nouveau driver for nvidia so I can enabled 3d acceleration? Or will I probably run into the same problems trying to get glx working with that driver?
View 1 Replies
View Related