Has anyone gotten this tv card to work? I am having one heck of time trying to do so.HP 5189-2535 ATSC/NTSC/QAM PCI Express (PCIe) Low Profile HDTV Tuner Card
# LG LGDT3304 VSB/QAM receiver chip
# Conexant CX23887-14Z PCIe A/V chip
# Conexant CX23417-11Z MEPG II A/V encoder chip
# PCI Express x1 interface
I own a Pixelview Play Pro Ultra tv card and here are the specs
lspci
Code:
navyseal@navyseal:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
[Code]....
I know there are heaps of sound problem threads around here, and I've been through them all and I still can't my sound to work.I have the motherboards onboard audio which works perfectly when I plug in speakers.I want to use my Creative Xfi xtreme audio. When I select it as the output for my sound, it freezes my audio players and firefox when I try.I don't know what the following means, but this is what ople need from other threads.tim@ubuntu:~$ uname -aLinux ubuntu 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
tim@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
[code]...
My laptop is Sony VAIO. I installed ubuntu. However i dnt get sound. My sound card is not working i think. How can i install my sound card here in ubuntu.
View 1 Replies View RelatedNevermind, i just fixed it.Sound card not working?
View 1 Replies View RelatedI upgraded to UBUNTU 9.10 and now my sound card is not working. The card is listed in the sound preferences Hardware but not in the input or output sections.
View 6 Replies View RelatedI'm doing an install for a friend, the machine is a Gateway with AMD Turion64. The install required the 64 bit version of Lucid 10.04 RC. When I try to install the NVIDIA hardware driver, upon reboot, it flickers, fails, and tells me to use low-setting graphics mode.
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2)
I have tried all 3 options in the Hardware Drivers menu with no success.
My sound card.. TECH-COM PCI 4 sound card isn't working with Ubuntu. I don't know where I can get its driver.
View 9 Replies View RelatedI've spent the last couple hours trying to figure out how to get my SoundBlaster XFi card working, but somehow in the process seem to have now also broken my on-board sound which when I first installed did work. I have no idea how as I hardly touched anything.Both cards are recognized in Sound preferences, sound is not muted there nor in Alsamixer. But neither produce any sound at all now.
Searching around the forums it seems that as of now my XFi should, kind of, work out of the box, but I've had no such luck.I'd really like any advice possible on getting my XFi with headphones to work in 10.04, but if this can't be done I'd atleast like to find a way to fully reset my sound setting so my on-board will work without having to wipe this partition and reinstall - there Must be an easier solution than that.
I have a EMU 1616m sound card and I can not get it to work with Ubuntu 10.04 or 10.10. At the boot sequence I get the message that firmware could not be loaded. However, when I use another Linux distro PARDUS that uses KDE, the card works perfectly. With KUBUNTU i don't get any chance either. I think it is a kernel problem but both distros have the same kernels. So, this is not a KDE vs GNOME problem either as KUBUNTU did not work it either.
View 2 Replies View RelatedJust spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
I have two sound (or audio) hardware on my desktop computer. One is part of my computer motherboard and the other one is a sound card (CA0106 Soundblaster) I bought to replace the other one. When I first installed Ubuntu, my sound card was working properly after I made the necessary changes (system>preferences>sound), but after a few days it just stopped working and the sound from the motherboard is only working.
I reinstalled Ubuntu to my computer a few days ago, and my sound card was working again, but once again, it stopped working after a few days. How can I fix this?
I have just installed kubuntu 10. My mobo is ASUS p7h55, which hastwo on board sound cards, one for stereo and the other for outputting sound through the hdmi link. When I connect my TV through HDMI, there is no sound. I go to Phonom, and there is only one card in the card selection box.I run aplay -l, and both cards are listed
View 1 Replies View Relatedmy creative sound card isnt working with my ubuntuit's my 1st time to use ubuntui have a built in sound card but it's not workingwritten Ectiviai dont have an ectivia soung card
i have Creative and Realtiki want the ubuntu to install the Creative
I have an almost noname tv tuner card: Vivanco PCI EASY BG/DK. Lspci says it is Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01). Dmesg detected it as a LifeView FlyVIDEO3000. I tried to configure it making the file at /etc/modprobe.d with the options card=2 tuner=5 (I found that also in dmesg). Still TvTime can't find any channels. I also tried using xawtv and scantv, but only managed to find two channels using ntsc somehow, but I have PAL BG/DK. (the card itself works on Windows, but it took me a while to configure the channels properly)
View 4 Replies View RelatedEarlier I was in windows to do school that I had to do in windows. I shut my monitor to suspend my computer, which disables my sound card. Later on I went back into ubuntu and forgot about it. Ubuntu had updates to the system and since then I have not been able to get my sound to work.
View 2 Replies View RelatedJust fitted an Inno3D (I-7300LE-G4E3) graphics card and I get a distorted boot up screen, a virtually unreadble boot menu (lots of extra white bits all over the screen) and when the system is booting the black screen with "booting from .." and the underscore at the end, is covered with white commas (?!), then the login screen pops up for a fraction of a second, then get a blank screen and no signal-cant get anything after this (or from the vga port on the pc)-I ve tried logging in even though I cant see anything, but no music , nothing.
Thought I might have to download drievers AFTER I d installed it, but as I had this problem, I removed it and tried to download driers before installation. Not sure which of the 4 to try, but tried 2 and neither works-GDebi is offered as an app to open them but nothing happens, nothing happens if I just click on them and when I try and install them from a terminal with the script from the nVidia site, it says unable to open them.
I am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn]
Subdevices: 8/8
Subdevice #0: subdevice #0
[code]...
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies View RelatedUnable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
I have a dual-boot PC (Windows 7 and Ubuntu w/current updates) with a USB hub PCI card. The card works fine in Windows, but is completely dead in Ubuntu, there is not even any power at the card's ports. How do I get Ubuntu to activate the card?
View 1 Replies View RelatedI have a desktop pc which is running Ubuntu 9.10, and for some apparent reason I am not getting sound from my sound card. No error message is coming from o/s, I have checked the sound card with head phones, still no sound.Now, I have checked my sound card, because on the same desktop pc, I have another hard drive, which runs Windows XP Professional, and my sound card works perfectly! Please note that I have two hard drives on my pc, one for Ubuntu and the other for XP. So, there is no conflict on operating systems.Does anyone know how I can resolve my sound problem - my sound card is a Creative Audigy 2 Sound Blaster.
View 9 Replies View RelatedI have had problems with my TV card working in 9.10 and 10.04. A fix was suggested to go back to a working kernel. In my case it was in 9.04. Could you give us working kernels in synaptic that we could use or test in 9.10 or 10.04? My attempts at installing kernels, or any program for that matter, from any place but synaptic or add/remove programs has usually ended in disaster.
View 6 Replies View RelatedI want to convert my laptop to Linux only machine. My Wireless card is Netgear WG511 and from the little research I have done it is not going to work under Linux. What is an easy to get working Wireless card? I have a Dell Inspiron 8500 and I plan to install Ubuntu 9.10.
View 12 Replies View RelatedI installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.