I have been recently using the GIMP, transferring from adobe photoshop. and the truth is i have been pleasantly surprised with GIMP, especially when comparing prices from the two. Anyway the one thing i have not been able to do, that i assume is possible is make a brush that i am able to sketch with with my wacom tablet.
what i mean by this is in adobe i was able to create a brush that would react affectively to the pressure senstivity and i would get nice realistic looking sketches that looked like pencil sketches. when i barley pressed on my tablet i would be light and when i pressed hard i was able to get the black line needed. i have messed around with the pressure settings on the brushes but havent noticed any difference when i press hard on my tablet or barely press at all.
When I choose a brush in GIMP, it does not allow me to change the details of a brush - such as the Angle, Aspect Ratio, Scale, and opacity. The slide bar buttons are there, but there's no "slide", so they cannot be moved.
I'm using 2.7.1 that is the one that came with the 9.10 build and updated normally through the Update Manager.
When working in GIMP using a Wacom pen (which I do a lot), not all the lines I draw show up. Maybe every 1 in 5 lines, just don't show up, and it's like the brush outline freezes. This becomes pretty annoying when drawing, which is why I log in standard GNOME without effects when using GIMP.
There is a minor problem that I think may be related, and that is that sometimes when I open a windows in GIMP, such as the Save or Open dialog, I won't be able to click anything in it with my pen. I then need to click the canvas in the background, and after that everything works. It seems as though the brush is stuck on the canvas, which is similar to what happens when drawing. I've tried different compiz settings with vSync and others, but nothing that made this work. This also seems to only be a problem when using a Wacom pen, and not when using the mouse.
I have a wacom bamboo pen and touch (cth460/056a:00d1). Completed is the driver compile and installation to support this device.It is working. Is there anything special I need to do to accommodate Gimp (ieressure sensitivity) and dual monitors (ie:width)? Any particular command or config app? I know about xinput, wacomcpl, and xsetwacom.
If you had Gimp 2.6 (with gimp-plugin-registry installed) and installed Gimp 2.7 to try its new goodies, but Layer Effects are not showing, and when executing "gimp" from console you get these *nasty* errors:
Code: This is a development version of GIMP. Debug messages may appear here. gimp-user-install: migrating from /home/user/.gimp-2.6 Traceback (most recent call last): File "/usr/lib/gimp/2.0/plug-ins/layerfx.py", line 23, in <module> import gimp, gimpplugin, math ImportError: No module named gimp .....
If you haven't install the 2.7 version yet. Before upgrading, backup "python" directory and then just restore it after installing 2.7.
I'm trying to configure my Wacom tablet in Ubuntu (9.4) and it's working pretty well!
I have one issue though.
In Windows (with the Wacom drivers) I have the option to set both Mouse Speed and Mouse Acceleration (see attached screen shot). I normally like to increase acceleration and decrease speed.
In Linux (with xsetwacom) I can only find one, SpeedLevel. Is it so, or are there any other way to configure it?
I opened up my Gimp brushes folder so that I can put a brushes file into the folder. Would not let me do it. Said I am not the owner and do not have permission. I right clicked inside the folder, same thing permissions grayed out, not owner. No apparent option to log in or do anything to gain permission. What can I do?
I have recently purchased a Wacom Bamboo Pen & Touch tablet and have got it working with Ubuntu 9.10 (Karmic) by following this post: [URL].
I am now trying to trap the actual data coming from the bamboo as I write with the pen and found some threads suggesting that if I do an xxd one of /dev/ttyS[0-4] I should be able to see output. However when I do a "sudo xxd /dev/ttyS0" the xxd command finishes straight away.
If I run the command "xxd /dev/input/mouse1" I can the data coming from the mouse movement so I am expecting to be able to see the same sort of thing coming from the wacom bamboo pen. Both the bamboo and the mouse are USB connected.
Does anyone know if the stream of data coming form the wacom bamboo should go to /dev/ttyS[0-4] or should I be looking elsewhere?
Some of you may have had with issues after installing GIMP on Lucid Lynx 10.04. Which may be directly related to "gimp-help-en", which could prevent you from installing other applications and preforming system tasks. If so, use this method to fix it.
Process: (Terminal > $ sudo apt-get install gimp)
1. After installing Gimp go to the terminal:
2. Then load up the language support application:
3. Then it will ask you to install the "gimp-help-en", confirm it.
4. Fix'd
I think this issue is directly linked to a systems with multiple languages, but I haven't been able to test this theory out yet.
I use ubuntu 9.04 and well I turned on my GIMP the other day and I see that my info box has changed you know the whatyou've done to the image shower. Well I cant riht click and click the layers anymore it shows like say I hit backspace shows eraseer or clear what happen to the way I could right click it and do whatever. Here is what I'm talking about[IRL]..
I often want to move several layers in the GIMP at the same time. I can't however select more than one at the same time. Is it somehow possible to move several layers simultaneously in the GIMP?
Somewhere along the line I have managed to get the below error when loading a jpeg in the gimp (either with 'open with' on context menu or directly)Running as an unprivileged user
Code:
Calling error for procedure 'file-jpeg-load':
Procedure 'file-jpeg-load' not found Opening '/home/fortyfourgalena/Desktop/photos/liza/inkosanalodge_20061201/20061201_171151_PC010620.jpg' failed: Procedure 'file-jpeg-load' not found
[code]...
This happens on a system running 10.04 / 64-bit. As I seem to recall a recent gimp update (might be wrong), I checked a 32-bit 10.04 laptop and it does not show the behavior. For information: the 64-bit system has some additional stuff installed for image processing (ufraw and darktable) but I have been using this already for a while without issues. The other main change on this 64-bit system before I noticed the problem was the installation of a geforce 8400 video card including the 'nomodeset' option in grub and install of the latest driver from the nvidia website. verify that the gimp on a 64-bit system is still functioning.Further a 'repair' from within synaptic throws the following error
Code:
E: /var/cache/apt/archives/gimp_2.6.8-2ubuntu1.2_amd64.deb: subprocess dpkg-deb --fsys-tarfile returned error exit status 2
Note: I found some messages regarding this problem on the web but they were referring to older kernels (2.6.8); and people reverted back to an even older kernel. And yes, there have been a recent kernel upgrade.
like the title says, after working in GIMP for, like, 5 minutes, my session suddenly closes and I have to login again. I have been looking a lot of time for a solution, but I've not seen anyone with this problem... does anyone of you have some kind of solution? I'm desperate. I really need to use it, and I don't want to use Wine+Photoshop, I don't like to rely on windows programs.
I've been searching for a while now and come up empty handed, but after some research on the history of digital camouflage and how it was created I was able to devise a simple method for creating at least a close approximation of the real thing.
Step 1: start with a picture of the "texture" you intend to use. it doesn't matter if it's a low resolution picture because you are going to intentionally pixelate it
Step 2: use the noise plugin "pick" and create some static in the picture. I've found that you can just set everything to maximum and apply the pick with good results.
Step 3: (optional) if you want this to be a repeating pattern, at this time apply the "make seamless" tool under Map plugins.
Step 4: Apply a pixel blur. dial it in just to where you start to see hard pixel edges forming. In most digital camo patterns, the pixels are taller than they are wide, about a 3:2 ratio
Step 5: Choose the number of colors you want in your camo pattern. Virtually all digital patterns are either three or four colors, but never any more than that. Change the image mode from RGB to 4 color indexed. Then you can change it back to RGB if you wish to change the colors in your camo.
you can play with the settings on each step to dial in something that looks proper. The proper scale for your camo is roughly 1/4" tall pixels. Try playing with different textures, or even non digital camo prints. In about two minutes we've just created both a woodland and a desert digital print that is close enough to pass for MARPAT using free software.
I decided not to use Photoshop in wine on my computer but to only use GIMP because I heard there is so many free plugins on the internet that makes it function almost exactly as Photoshop.I install plugins but then GIMP wont open at all.I did a complete fresh install of 10.04 because I was having this GIMP problem after installing gimpshop and installing Photoshop 7, I figured it was the Photoshop that caused the problem
So now with a complete fresh install GIMP still wont work with any plugins installed.is there something i need before I can add any plugins or whats going on?
I found a filter I like, and I need to apply it on a couple thousand photos, how can I apply this in gimp to all these photos without having to work them one by one?
I've had the problem that my Wacom Intuos 3 tablet seems very slow under gimp while booted into unity desktop. Doesn't seem to be a problem in other painting software like MyPaint and doesn't seem to be a problem when I log into ubuntu classic Gnome desktop rather than Unity.
I don't know when it started, but my Wacom stylus clicks haven't been working right. It seems to do the "click down" correctly, but hasn't always been doing the "click up" when I release the pressure on my stylus. This leads to a bunch of problems when Ubuntu thinks I'm holding down the mouse button, when in reality I'm not holding anything down.I have an older Wacom GD (Intuos 1) USB tablet. I finally figured out how to fix the problem tonight. Here is what I did:1) Determine that "name" of the tablet:lsusb | grep -i wacomBus 002 Device 003: ID 056a:0022 Wacom Co., Ltd Intuos 9x12So in my case, I'm dealing with an Intuos 9x12 tablet. This becomes important at step #3.
2) Edit the right xorg.conf file: cd /usr/share/X11/xorg.conf.d/ sudo gedit 50-wacom.conf3) At the end of this file, add the following block:
I add layers and they don't show up and the controls at the bottom of the layers palette (add layer, bin, etc) are all blanked out and i can't select them. It's impossible to do anything with layers in GIMP as it is at the moment and i need to get it sorted. I have tried closing down the layers tab, restarting GIMP and then adding the tab again but i get the same result, a layers palette that won't respond or show any layers that i do add.
There used to be a dropdown menu at the bottom right corner of the main window of GIMP (the window with whatever image i'm working on), where i would be able to select between zoom levels (such as 50%, 100%, etc). Recently, that menu seems to have disappeared, and i've had to use the actual zoom tool, which i find frustrating since i have to switch back and forth between tools.
I want to make an 8-bit looking image that has very large pixels. My solution was to make a 50x50 image, zoom in, draw it with the 1x1 pixel pencil tool, and then scale it to whatever size i want.Everything went well except, when i try to scale it the anti-aliasing kicks in and blurs everything. Is there a way that i can disable anti-aliasing?
i recently had update, it worked fine but gimp disappeared. now if i try to install it in terminal it gives me this:
Code: Select allThe following NEW packages will be installed: gimp{b} gimp-data{a} libgimp2.0{ab} 0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 15.0 MB of archives. After unpacking 68.3 MB will be used.
this should be easy but I dont know which option to use. I want to make a flier with Gimp, learned how to add fonts that are better than the crappy ones that come by default, but now I want to add images but want them to automatically scale to a size that I specify with a square I create by left clicking. I dont want to have to resize the entire image after measuring, I just want it to shrink/expand to fit an area that I specify for it.
I've had this odd, stubborn problem that seems to be related to the nouveau video driver and certain kernel builds: opening or saving full resolution jpeg image files using GIMP takes from 1-5 minutes and causes xorg CPU usage to reach almost 100%.This also occurs when using UFRaw to open Canon raw image files. The problem is not intermittent, it happens each time I open a file. Opening photos in the default image viewer works fine.This bug has vexed me on and off for the last couple of months, and seems to be triggered by a combination of kernel version and the Nouveau driver. I switched to Debian Squeeze from Ubuntu 10.04 because I was experiencing slow image open times in Ubuntu 10.04 (using the Nouveau driver).I did not experience the bug running Squeeze with the nv driver and kernel 2.6.32-3.
I did not have the bug running Squeeze with the nouveau driver and kernel 2.6.32-5 backported from Sid.I began experiencing the bug again after the Squeeze updates on June 14th (still running nouveau and kernel 2.6.32-5). I update daily so it's likely to be that day's updates which caused the bug to reappear.Just for grins, I installed the Liquorix kernel. The bug does not occur using kernel 2.6.34-0.dmz.10-liquorix-686 and the nouveau video driver.I have a Nvidia FX5500 video card. I prefer the nouveau driver to nv as my display seems to behave better. The Nvidia proprietary drivers are not an option because they produce X freezes when I am doing photo editing. The liquorix kernel seems to be working fine, but for long-term stability I'd rather be running a mainline Debian kernel.
I just upgraded to Lucid and reinstalled Wacom driver for my CTH-460 Bamboo, but I cannot set Button1 to PagUp..... I tried these cmd:
1) xsetwacom set "Wacom BambooFun 2FG 4x5 Finger pad" Button1 "key core pgup" But I receive msg: Invalid key 'CORE'
2) xsetwacom set "Wacom BambooFun 2FG 4x5 Finger pad" Button1 "core key pgup" (swapping core and key keywords) But I receive msg: Invalid key 'pgup'
I tested also using pagup instead of pgup with the same results; so I used xsetwacom list mod in order to see which modifiers could be used, but unlikely i got the msg: unknown argument to list
UPDATE: If I send xsetwacom set "Wacom BambooFun 2FG 4x5 Finger pad" Button1 "CORE KEY ALT F2" all works fine! I'm lost.
Hello, I have a wacom bamboo pen tablet that was working great until recently. Now when ever I touch the stylus to the tablet it causes the cursor to freeze and lag behind. Running 10.04
