i recently had update, it worked fine but gimp disappeared. now if i try to install it in terminal it gives me this:
Code: Select allThe following NEW packages will be installed:
 gimp{b} gimp-data{a} libgimp2.0{ab}
0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 15.0 MB of archives. After unpacking 68.3 MB will be used.
[Code] .....
If you had Gimp 2.6 (with gimp-plugin-registry installed) and installed Gimp 2.7 to try its new goodies, but Layer Effects are not showing, and when executing "gimp" from console you get these *nasty* errors:
Code:
This is a development version of GIMP. Debug messages may appear here.
gimp-user-install: migrating from /home/user/.gimp-2.6
Traceback (most recent call last):
File "/usr/lib/gimp/2.0/plug-ins/layerfx.py", line 23, in <module>
import gimp, gimpplugin, math
ImportError: No module named gimp .....
If you haven't install the 2.7 version yet. Before upgrading, backup "python" directory and then just restore it after installing 2.7.
Double clicking a PDF on the desktop launch... GIMP.
View 3 Replies View RelatedI've had this odd, stubborn problem that seems to be related to the nouveau video driver and certain kernel builds: opening or saving full resolution jpeg image files using GIMP takes from 1-5 minutes and causes xorg CPU usage to reach almost 100%.This also occurs when using UFRaw to open Canon raw image files. The problem is not intermittent, it happens each time I open a file. Opening photos in the default image viewer works fine.This bug has vexed me on and off for the last couple of months, and seems to be triggered by a combination of kernel version and the Nouveau driver. I switched to Debian Squeeze from Ubuntu 10.04 because I was experiencing slow image open times in Ubuntu 10.04 (using the Nouveau driver).I did not experience the bug running Squeeze with the nv driver and kernel 2.6.32-3.
I did not have the bug running Squeeze with the nouveau driver and kernel 2.6.32-5 backported from Sid.I began experiencing the bug again after the Squeeze updates on June 14th (still running nouveau and kernel 2.6.32-5). I update daily so it's likely to be that day's updates which caused the bug to reappear.Just for grins, I installed the Liquorix kernel. The bug does not occur using kernel 2.6.34-0.dmz.10-liquorix-686 and the nouveau video driver.I have a Nvidia FX5500 video card. I prefer the nouveau driver to nv as my display seems to behave better. The Nvidia proprietary drivers are not an option because they produce X freezes when I am doing photo editing. The liquorix kernel seems to be working fine, but for long-term stability I'd rather be running a mainline Debian kernel.
I noticed that the "Bookmarks" menu in Iceweasel was totally empty. I quit IW and started it again, and the problem persisted. I disabled all my addons, restarted again, and they were still gone. I tried to restore them (the backup copies are stored as JSON files in ~/.mozilla) from Bookmarks -> Organize -> Import -> Restore, but I got "unable to process the backup file" for each of the backups.
View 4 Replies View RelatedI'm running Debian Squeeze, and I have a gnome theme called "Moomex" installed. I have had it for a while and it has worked fine, until it suddenly stopped displaying menu scroll arrows (like for long bookmark menus in web browsers). I can still scroll, but in place of the arrows is a solid colored rectangle that clashes with my theme. I went searching and found my theme's arrow image files (see code below). I have no idea how these files are implemented into the theme display, so I don't know how to re-enable them. I tried reinstalling the theme, but it changed nothing. These arrows show up just fine in any other stock theme, and they were fine in this one too until they randomly disappeared.
View 3 Replies View RelatedI have a suspicion that this is easily fixed, however a good google (and this forum) hammering having turned up the fix. So I probably have the wrong search criteria, My Gnome Applet for switching CPU Frequency Scaling has 'disappeared' and is not listed in the the Add to Panel.. list of applets.
View 3 Replies View RelatedSome of you may have had with issues after installing GIMP on Lucid Lynx 10.04. Which may be directly related to "gimp-help-en", which could prevent you from installing other applications and preforming system tasks. If so, use this method to fix it.
Process: (Terminal > $ sudo apt-get install gimp)
1. After installing Gimp go to the terminal:
2. Then load up the language support application:
3. Then it will ask you to install the "gimp-help-en", confirm it.
4. Fix'd
I think this issue is directly linked to a systems with multiple languages, but I haven't been able to test this theory out yet.
I am on 10.10 using Gnome 2. When I go to install GIMP via Terminal, SPM or USC I get an error about not being able to install libpoppler-glib4. Odd thing is I have the updated version.
View 6 Replies View RelatedI have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020
of the same hard drive for core.img, core.img is at this location on
/dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
I use ubuntu 9.04 and well I turned on my GIMP the other day and I see that my info box has changed you know the whatyou've done to the image shower. Well I cant riht click and click the layers anymore it shows like say I hit backspace shows eraseer or clear what happen to the way I could right click it and do whatever. Here is what I'm talking about[IRL]..
View 2 Replies View RelatedI often want to move several layers in the GIMP at the same time. I can't however select more than one at the same time. Is it somehow possible to move several layers simultaneously in the GIMP?
View 1 Replies View RelatedCan it be done by the end-user?I'm in Karmic, and I want to make a <[X]> , or <Ctrl> + <[X]> to execute 'Crop to selection'.
View 1 Replies View RelatedSomewhere along the line I have managed to get the below error when loading a jpeg in the gimp (either with 'open with' on context menu or directly)Running as an unprivileged user
Code:
Calling error for procedure 'file-jpeg-load':
Procedure 'file-jpeg-load' not found
Opening '/home/fortyfourgalena/Desktop/photos/liza/inkosanalodge_20061201/20061201_171151_PC010620.jpg' failed: Procedure 'file-jpeg-load' not found
[code]...
This happens on a system running 10.04 / 64-bit. As I seem to recall a recent gimp update (might be wrong), I checked a 32-bit 10.04 laptop and it does not show the behavior. For information: the 64-bit system has some additional stuff installed for image processing (ufraw and darktable) but I have been using this already for a while without issues. The other main change on this 64-bit system before I noticed the problem was the installation of a geforce 8400 video card including the 'nomodeset' option in grub and install of the latest driver from the nvidia website. verify that the gimp on a 64-bit system is still functioning.Further a 'repair' from within synaptic throws the following error
Code:
E: /var/cache/apt/archives/gimp_2.6.8-2ubuntu1.2_amd64.deb: subprocess dpkg-deb --fsys-tarfile returned error exit status 2
Note: I found some messages regarding this problem on the web but they were referring to older kernels (2.6.8); and people reverted back to an even older kernel. And yes, there have been a recent kernel upgrade.
like the title says, after working in GIMP for, like, 5 minutes, my session suddenly closes and I have to login again. I have been looking a lot of time for a solution, but I've not seen anyone with this problem... does anyone of you have some kind of solution? I'm desperate. I really need to use it, and I don't want to use Wine+Photoshop, I don't like to rely on windows programs.
View 1 Replies View RelatedI have been recently using the GIMP, transferring from adobe photoshop. and the truth is i have been pleasantly surprised with GIMP, especially when comparing prices from the two. Anyway the one thing i have not been able to do, that i assume is possible is make a brush that i am able to sketch with with my wacom tablet.
what i mean by this is in adobe i was able to create a brush that would react affectively to the pressure senstivity and i would get nice realistic looking sketches that looked like pencil sketches. when i barley pressed on my tablet i would be light and when i pressed hard i was able to get the black line needed. i have messed around with the pressure settings on the brushes but havent noticed any difference when i press hard on my tablet or barely press at all.
I've been searching for a while now and come up empty handed, but after some research on the history of digital camouflage and how it was created I was able to devise a simple method for creating at least a close approximation of the real thing.
Step 1: start with a picture of the "texture" you intend to use. it doesn't matter if it's a low resolution picture because you are going to intentionally pixelate it
Step 2: use the noise plugin "pick" and create some static in the picture. I've found that you can just set everything to maximum and apply the pick with good results.
Step 3: (optional) if you want this to be a repeating pattern, at this time apply the "make seamless" tool under Map plugins.
Step 4: Apply a pixel blur. dial it in just to where you start to see hard pixel edges forming. In most digital camo patterns, the pixels are taller than they are wide, about a 3:2 ratio
Step 5: Choose the number of colors you want in your camo pattern. Virtually all digital patterns are either three or four colors, but never any more than that. Change the image mode from RGB to 4 color indexed. Then you can change it back to RGB if you wish to change the colors in your camo.
you can play with the settings on each step to dial in something that looks proper. The proper scale for your camo is roughly 1/4" tall pixels. Try playing with different textures, or even non digital camo prints. In about two minutes we've just created both a woodland and a desert digital print that is close enough to pass for MARPAT using free software.
Is there any method to use GIMP in batch mode, to run from the terminal, and scale all the .JPG files down by 25%
View 6 Replies View RelatedI decided not to use Photoshop in wine on my computer but to only use GIMP because I heard there is so many free plugins on the internet that makes it function almost exactly as Photoshop.I install plugins but then GIMP wont open at all.I did a complete fresh install of 10.04 because I was having this GIMP problem after installing gimpshop and installing Photoshop 7, I figured it was the Photoshop that caused the problem
So now with a complete fresh install GIMP still wont work with any plugins installed.is there something i need before I can add any plugins or whats going on?
I found a filter I like, and I need to apply it on a couple thousand photos, how can I apply this in gimp to all these photos without having to work them one by one?
View 3 Replies View RelatedI've had the problem that my Wacom Intuos 3 tablet seems very slow under gimp while booted into unity desktop. Doesn't seem to be a problem in other painting software like MyPaint and doesn't seem to be a problem when I log into ubuntu classic Gnome desktop rather than Unity.
View 1 Replies View RelatedI add layers and they don't show up and the controls at the bottom of the layers palette (add layer, bin, etc) are all blanked out and i can't select them. It's impossible to do anything with layers in GIMP as it is at the moment and i need to get it sorted. I have tried closing down the layers tab, restarting GIMP and then adding the tab again but i get the same result, a layers palette that won't respond or show any layers that i do add.
View 3 Replies View RelatedThere used to be a dropdown menu at the bottom right corner of the main window of GIMP (the window with whatever image i'm working on), where i would be able to select between zoom levels (such as 50%, 100%, etc). Recently, that menu seems to have disappeared, and i've had to use the actual zoom tool, which i find frustrating since i have to switch back and forth between tools.
View 3 Replies View RelatedI want to make an 8-bit looking image that has very large pixels. My solution was to make a 50x50 image, zoom in, draw it with the 1x1 pixel pencil tool, and then scale it to whatever size i want.Everything went well except, when i try to scale it the anti-aliasing kicks in and blurs everything. Is there a way that i can disable anti-aliasing?
View 2 Replies View RelatedHow to install gimp on Fedora 15 32 bit ?
View 8 Replies View RelatedI went into terminal and tried to install GIMP with apt, and I et this error:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation:
The following packages have unmet dependencies:
gimp: Depends: libgimp2.0 (<= 2.6.7-z) but 2.6.8-1~getdeb1 is to be installed
Depends: gimp-data (<= 2.6.7-z) but 2.6.8-1~getdeb1 is to be installed
E: Broken packages
this should be easy but I dont know which option to use. I want to make a flier with Gimp, learned how to add fonts that are better than the crappy ones that come by default, but now I want to add images but want them to automatically scale to a size that I specify with a square I create by left clicking. I dont want to have to resize the entire image after measuring, I just want it to shrink/expand to fit an area that I specify for it.
View 7 Replies View RelatedI would like to install a plugin in gimp in my Fedora 15 box. The plugin is about wavelet decompose: [URL] and it is necessary to compile the plugin.
I downloaded from here: [URL] but when i follow the instructions of the install file (make & make install) i always got this:
[root@localhost wavelet-decompose-0.1.2]# make
make -C po
make[1]: Entering directory `/home/joseda/wavelet-decompose-0.1.2/po'
msgfmt -c -v -o de.mo de.po
17 translated messages.
[Code].....
installing gimp onto my laptop, i am clearly a little useless. i have tried the apt-get install gimp that is says on the gimp download page but all i get is an error message in the terminal saying : E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? what do i do?
View 6 Replies View Relatedhow to install gimp using yum. when i doing i get a message that no match found
View 1 Replies View Related