I've downloaded the ISO file but not sure if we need an 800 MB because i am trying with active ISO burner and it can not burn the disc.
Please tell me, this is the first time i am planning to use linux. I am a windows user.
I have been trying to burn an ISO to a blank DVD with Brasero Disc Burner, but every time I try, it gets at around 93% done, then gives me:
"The disc could not be ejected, though it needs to be removed for the current operation to continue"
I have attached a screenshot of the error. And this is not my error screenshot, I have a different DVD Drive. I just attached this one because I didn't want to wait for it to give me an error again so I could take my own screenshot.
Does anybody know why this happens? Or a way to fix it? Or a different software to burn ISO to DVD that is as simple as this one.
It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...
[Code]....
I am trying to burn an .iso but Ubuntu won't see my burner at all.. Newb to ubuntu, I am on 10.10.
View 9 Replies View Relatedmy DVD Burner is a MATSHITA BD-CMB UJ-120 i'm running DEBIAN SQUEEZE.In the past using Kubuntu (until 9.10) it burned DVD without problems other info are in the k3b debug output..I'm using VERBATIM DVD+R i don't know what to do.
View 4 Replies View RelatedI tried six different M3 files using Bresaro Burn to burn to a CD (audio cd) however, one of these files are able to burn to a disc with Bresaro application. I burned the same files using Windows Media Player on my xp desktop.
View 2 Replies View RelatedI'm using Ubuntu 9.10 and Brasero Disc Burner to burn .iso's (NON-ILLEGALLY. I'm burning linux distros on them.) . I'm using Sony DVD-R's that on the disk say 4.7 GB, but it says 3.7 on Brasero.
View 4 Replies View RelatedCD-R/W+DVD-R/W drive works fine for reading.
The last time I used it to burn was about a year ago. New discs are detected and I am offered to burn in K3b but K3b asks for media to be inserted (it already is).
Searched on some of these errors and this is a problem for others with indifferent solutions. Username is in cdrom group and /dev/scd0 is group cdrom rw. Latest updates and reboot changed nothing. Plus I am getting the k3b locale error even though I have LC_ALL="en_US.UTF-8" in my /etc/default/locale.
K3b runs after the warning but the Burn CD Image dialog always displays Burn Medium: Please insert an empty CD-R(W) medium... even though there is a CD-R in the drive.
So, I have a 10.04 ISO and no way to burn it.
Code:
$ wodim --devices
wodim: Overview of accessible drives (1 found) :
-------------------------------------------------------------------------
0 dev='/dev/scd0' rwrw-- : '_NEC' 'DVD+RW ND-5100A'
-------------------------------------------------------------------------
[Code]....
Is there any way to burn a disc from .mdx file or convert it to more popular format?
View 1 Replies View RelatedI was wondering if someone could tell me how I can burn my data files onto a blu ray disc. I have the blue ray discs, I have the blu ray reader/writer. CD/DVD Creator and Brasero failed me.
View 3 Replies View RelatedI've been trying to burn a windows 7 iso to a blank disc in ubuntu.
I've tried right click-write to disk, it writes it but the disc won't boot and when I look inside the disc there's no files present.
I tried doing it with cd creator and it gives me some messages like.
"Do you want to create a disc from the contents of the image or with the image file inside?"
"There is only one selected file
("xxxxxx.iso") It is the image of a disc and its contents can be burnt."
I click "burn as file"
Then I get a message saying "Do you really want to add "xxxxxx.iso to the selection and use the version of ISO9660 standard to support it"?
"the size of the file is over 2gb. Files larger than 2gb are not supported by iso9660 standard in its first and second versions. it is recommended to use the third version of iso9660 standard which is supported by most operating systems including linux and all versions of windows."
I click add file.
Then it starts "estimating the file size" It says please wait untill this operation is completed, but it never does, I left it for 2 hours.
I also tried burning with infra record in windows and get some error messages, and I also tried brasero in ubuntu with no success.
I am having trouble burning an iso disc image that I downloaded of the Windows Vista Recovery disc for a friend who cannot boot her computer anymore. I downloaded the iso disc image and it mounts on my computer just fine, so it should be able to be burned as the disc image to a CD no problem. However, each time I right click on the iso file, and go down to Write to Disc, and then the menu comes up and I make sure that the destination drive is my CD/DVD burner drive with a blank CD-R in the drive, it burns the disc, but it always ends up being a CD with the file of the iso on the disc...!! It doesn't burn the image, it burns a copy of the image as a file! I uninstalled the CD/DVD burning software that was on my computer and installed CD/DVD Creator instead from the Ubuntu Software Center.
I tried following the steps on [URL] which tells how to burn a disc image from an ISO file. I follow it exactly, but I still get the same results: I get a disc that is not the image, but has the image on the disc. Now, I can mount the image on the disc on my computer, but that won't do my friend any good who needs to BOOT off this disc to fix her computer running Windows Vista. But ever since I wiped out my computer and went Ubuntu, I haven't been able to write an iso disc image to a CD or DVD properly. Does it matter if it is a CD or a DVD that is used? Like, if I put a DVD in, would the disc iso image burn to the DVD rather than a CD because of the way the image was made? For some reason I never thought it mattered, but does it?
I've been trying all week to get mpg to dvd, my dad has a video that is supposed to be aired on television soon and the deadline to have it in is tomorrow. right now i have it as an mpg file and i cannot get it to burn to dvd. I've tried using devede and Gnomebaker, but everytime i put it in the dvd player it says disc error.
View 9 Replies View Relatedi both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies View RelatedCan i burn 2 disc in the same time with k3b ?
View 4 Replies View RelatedI have 2 iso's that are movies that i need to burn into 1 disc. what can use to accomplish this? i try to use brasero but i can only do one.
View 5 Replies View RelatedSay I have an Ubuntu Remix that's only 300 MB.
Normally when i burn it to a 700MB CD-R the extra 400 MB is wasted.
Is there a way I can burn a multisession disc from an ISO?
I tried using this command once but it didn't work.
cdrecord dev=0,0 -v -eject speed=16 fs=16m -multi clonezilla-live-1.2.2-31.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 3 = CD-ROM XA mode 2
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
I am unable to burn to DVD-R media using a Plextor PX-716SA SATA drive. I have tried using K3b, Brasero, and Nero Linux. What happens is that the first 5 to 6 MB (possibly just lead-in) of the data is burned before the burner gives up and remains locked. I cannot remove the disc, the burning software remains frozen (no response after hitting software 'cancel recording' button), and the software process stays "uninterruptible" and thus unable to kill. The only way to remove the disc is by rebooting the PC.
The behavior also occurs if I run a test/simulated mode with the aformentioned software, but nevertheless I've been using Taiyo Yuden 8x DVD-R media. Successful burns and simulations have occurred with DVD+RW media, CD-R, and CD-RW; I don't have any DVD+R nor DVD-RW discs to test. Burning on DVD-R has worked excellent in Windows Vista with many software programs. The latest Plextor firmware has been installed on the drive, which is version 1.11. I am currently running openSUSE 11.2 with kernel version 2.6.31.13.
To investigate this further, I've tried burning from the command line using the actual programs the front-ends use to obtain specific error messages, including growisofs, cdrecord (wodim), and cdrskin. No succesful burns. For the following tests, the source data has been an ISO image of openSUSE 11.2. Nonetheless, custom data compilations have also failed, along with other DVD images showing similar error messages.
[Code]...
I have searched plenty of forums with no fixes to this problem. There have been several issues posted involving Linux and Plextor drives but these posts are old with old kernel versions. As far as SATA is concerned, this Linux installation is on a 250GB SATA drive that has not exhibited problems of any kind.
I am looking for a video converter that will convert AVI into DVD format to burn a disc. I had a program called convert X for windows 7 and with that I was able to make menu's for the DVD and when it finished converting, it would burn it to a disc.
View 2 Replies View Related"List.lst" is my file containing my files. How may I burn them onto my blank disc with either growisofs or cdrecord? Usually it is based on a copy of a folder to a temp folder, and burn this folder. but I would like to use a file as input. man growisofs is not so widely full of explanations.. .
View 4 Replies View RelatedI've googled and searched here and can't come up with anything. I've got a .MKV file I want to write to a Blu-Ray and can't find software to do it. I assumed it's the same process as a DVD but I guess not. I basically need the Blu-Ray equivalent of DeVeDe.
View 10 Replies View RelatedIt's been a while since I hosed my system, and I finally stopped procrastinating to backup, format, and reinstall. The latest disc I have available is 9.10, and getting new ones is a feat now that Canonical won't mail them to me. So I installed 9.10 and immediately upgraded to 10.04; somewhere in there it asked me where to installed GRUB and I told it sda1 but not sda, which was apparently a mistake.
I got an error about "grub_puts_" being undefined and used this guide per a relevant thread. I rebooted and got through GRUB, but now all that comes up is the purple background and my cursor; the mouse doesn't move, not that there's anything for it to click anyway. I went on #ubuntu IRC and was advised to do a clean install rather than an upgrade.
Of course I can just stay with 9.10 but would prefer the latest (of course it's about to be obsolete anyway...). I have also heard that it's possible to install to a USB drive; I'm guessing that likewise requires a CD? I guess what I'm wondering is whether I can use a 9.10 install to download and install 10.04 directly to a different device? Finding someone who has a CD burner is a real hassle.
good DVD burner in ubuntu 9.10
View 1 Replies View RelatedI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View Relatedwhould like to change my default dvd burner from brassaro to k3b...every time i put dvd or cd in brassaro starts..
View 4 Replies View Relatedthis blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedSystem fedora10
An IDE hard disk
Equipped with two IDE drives (one dvd drive a dvd burner drive which both share an IDE cable) Just using the system - Management - updatesystem the software upgrade of the upgrade is complete to allow the resumption of a problem was the
1, the normal boot drive two lights are flashing above but after the restart only the DVD drive light flickering burner did not react
2, when the show after the show graphics motherboard models that can enter the boss that dell card will be nearly 2 minutes (the past, each time on boot or restart the screen only shows a few seconds) then self-organized (here in particular explain if the motherboard model shows that by then dell would have been completely stuck only by restarting)
3, self-completed fedora10 select Start (here Please note that if the first question will not be the normal boot into the fedora restart if it is then that some characters will be displayed after the duplicate has been duplicate unless you press the restart)
4, in the end this thing have updatesystem Why are used with the yum update to update how things ah not the same as how to turn off the options I have at him inside the selection are not updated but not used
Say over these problems are in the use of upgraded updatesystem caused ago have never been Open the case I have put the hard disk drive memory and so on have won the cup to another mounted on a boss, or no longer put into the restoration of the factory set up is not effective
how to setup an Active/Active Load Balanced and High Available (If one of the nodes is down the system still runs) MySQL cluster. I have found quite a few howto's but I have some things unclear in my mind. I found a few solutions like this one: [URL] or this: [URK] Those are using two or four MySQL nodes, two Load Balancers to avoid a single point of failure but only one MySQL cluster management server. What happens if the MySQL cluster management fails?
I have also found a "MySQL Master-Master Circular Replication" technique but from what I read, with this option there is a chance that conflicts will arise if node A and node B both insert an auto-incrementing key on the same table.
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
