Hardware :: Burn An ISO And Making A Multisession Disc
Dec 3, 2009
Say I have an Ubuntu Remix that's only 300 MB.
Normally when i burn it to a 700MB CD-R the extra 400 MB is wasted.
Is there a way I can burn a multisession disc from an ISO?
I tried using this command once but it didn't work.
cdrecord dev=0,0 -v -eject speed=16 fs=16m -multi clonezilla-live-1.2.2-31.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 3 = CD-ROM XA mode 2
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
View 3 Replies
ADVERTISEMENT
Mar 10, 2010
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
View 4 Replies
View Related
Mar 7, 2011
I cannot burn DVD's or Cd's in k3b this is what happens:
I cannot burn with both.
I tried K3b and the same thing I got this message.
p, li { white-space: pre-wrap; } Devices
-----------------------
SONY DVD RW DRU-820A 1.0c (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW
[Code]....
View 2 Replies
View Related
Jan 11, 2010
I have a problem while burning a CD-Extra (audio+data in two seperate sessions) in k3b 1.68.0~alpha3-0ub on Karmic. The audio tracks are being burned and the session is closed, but k3b does not start burning the second session. There is the last status message in the log: "Searching previous session" and one near the progress bar: "Closing session". Normally it should close the audio session, eject the burner for resetting his state and begin burning the second session. But in fact it just stops, instead of burning the second session. My only option is to cancel.
I already tried to add -eject into the user options of wodim/cdrecord. It ejects, but it didn't help. The first (audio-)session nevertheless is correctly burned, only the second (data-)session is missing. I tried to switch the writing app to cdrdao (option in k3b), but in this mode k3b dies with a segmentation fault. Only "auto" or "cdrecord" mode works. (In fact "auto" chooses cdrecord). There doesn't seem to be a different version of k3b available in synaptic to try out. I switched over from gentoo, where k3b worked. Unfortunately I cannot remember the exact version of k3b in gentoo. The system was approx. 1 year old.
PS: Is there a native Gnome/GTK app that does CD-Extra? Brasero and GnomeBaker do not support it yet.
Code:
Devices
-----------------------
Optiarc DVD RW AD-7543A 1-00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW]
[code]......
View 7 Replies
View Related
Apr 29, 2010
CD-R/W+DVD-R/W drive works fine for reading.
The last time I used it to burn was about a year ago. New discs are detected and I am offered to burn in K3b but K3b asks for media to be inserted (it already is).
Searched on some of these errors and this is a problem for others with indifferent solutions. Username is in cdrom group and /dev/scd0 is group cdrom rw. Latest updates and reboot changed nothing. Plus I am getting the k3b locale error even though I have LC_ALL="en_US.UTF-8" in my /etc/default/locale.
K3b runs after the warning but the Burn CD Image dialog always displays Burn Medium: Please insert an empty CD-R(W) medium... even though there is a CD-R in the drive.
So, I have a 10.04 ISO and no way to burn it.
Code:
$ wodim --devices
wodim: Overview of accessible drives (1 found) :
-------------------------------------------------------------------------
0 dev='/dev/scd0' rwrw-- : '_NEC' 'DVD+RW ND-5100A'
-------------------------------------------------------------------------
[Code]....
View 5 Replies
View Related
Jun 24, 2010
Is there any way to burn a disc from .mdx file or convert it to more popular format?
View 1 Replies
View Related
Feb 4, 2011
I was wondering if someone could tell me how I can burn my data files onto a blu ray disc. I have the blue ray discs, I have the blu ray reader/writer. CD/DVD Creator and Brasero failed me.
View 3 Replies
View Related
Sep 23, 2010
Can i burn 2 disc in the same time with k3b ?
View 4 Replies
View Related
Sep 16, 2010
I have 2 iso's that are movies that i need to burn into 1 disc. what can use to accomplish this? i try to use brasero but i can only do one.
View 5 Replies
View Related
Nov 21, 2010
I've been trying to burn a windows 7 iso to a blank disc in ubuntu.
I've tried right click-write to disk, it writes it but the disc won't boot and when I look inside the disc there's no files present.
I tried doing it with cd creator and it gives me some messages like.
"Do you want to create a disc from the contents of the image or with the image file inside?"
"There is only one selected file
("xxxxxx.iso") It is the image of a disc and its contents can be burnt."
I click "burn as file"
Then I get a message saying "Do you really want to add "xxxxxx.iso to the selection and use the version of ISO9660 standard to support it"?
"the size of the file is over 2gb. Files larger than 2gb are not supported by iso9660 standard in its first and second versions. it is recommended to use the third version of iso9660 standard which is supported by most operating systems including linux and all versions of windows."
I click add file.
Then it starts "estimating the file size" It says please wait untill this operation is completed, but it never does, I left it for 2 hours.
I also tried burning with infra record in windows and get some error messages, and I also tried brasero in ubuntu with no success.
View 9 Replies
View Related
Jan 4, 2011
I am having trouble burning an iso disc image that I downloaded of the Windows Vista Recovery disc for a friend who cannot boot her computer anymore. I downloaded the iso disc image and it mounts on my computer just fine, so it should be able to be burned as the disc image to a CD no problem. However, each time I right click on the iso file, and go down to Write to Disc, and then the menu comes up and I make sure that the destination drive is my CD/DVD burner drive with a blank CD-R in the drive, it burns the disc, but it always ends up being a CD with the file of the iso on the disc...!! It doesn't burn the image, it burns a copy of the image as a file! I uninstalled the CD/DVD burning software that was on my computer and installed CD/DVD Creator instead from the Ubuntu Software Center.
I tried following the steps on [URL] which tells how to burn a disc image from an ISO file. I follow it exactly, but I still get the same results: I get a disc that is not the image, but has the image on the disc. Now, I can mount the image on the disc on my computer, but that won't do my friend any good who needs to BOOT off this disc to fix her computer running Windows Vista. But ever since I wiped out my computer and went Ubuntu, I haven't been able to write an iso disc image to a CD or DVD properly. Does it matter if it is a CD or a DVD that is used? Like, if I put a DVD in, would the disc iso image burn to the DVD rather than a CD because of the way the image was made? For some reason I never thought it mattered, but does it?
View 1 Replies
View Related
Apr 25, 2011
I've been trying all week to get mpg to dvd, my dad has a video that is supposed to be aired on television soon and the deadline to have it in is tomorrow. right now i have it as an mpg file and i cannot get it to burn to dvd. I've tried using devede and Gnomebaker, but everytime i put it in the dvd player it says disc error.
View 9 Replies
View Related
Apr 14, 2010
I am unable to burn to DVD-R media using a Plextor PX-716SA SATA drive. I have tried using K3b, Brasero, and Nero Linux. What happens is that the first 5 to 6 MB (possibly just lead-in) of the data is burned before the burner gives up and remains locked. I cannot remove the disc, the burning software remains frozen (no response after hitting software 'cancel recording' button), and the software process stays "uninterruptible" and thus unable to kill. The only way to remove the disc is by rebooting the PC.
The behavior also occurs if I run a test/simulated mode with the aformentioned software, but nevertheless I've been using Taiyo Yuden 8x DVD-R media. Successful burns and simulations have occurred with DVD+RW media, CD-R, and CD-RW; I don't have any DVD+R nor DVD-RW discs to test. Burning on DVD-R has worked excellent in Windows Vista with many software programs. The latest Plextor firmware has been installed on the drive, which is version 1.11. I am currently running openSUSE 11.2 with kernel version 2.6.31.13.
To investigate this further, I've tried burning from the command line using the actual programs the front-ends use to obtain specific error messages, including growisofs, cdrecord (wodim), and cdrskin. No succesful burns. For the following tests, the source data has been an ISO image of openSUSE 11.2. Nonetheless, custom data compilations have also failed, along with other DVD images showing similar error messages.
[Code]...
I have searched plenty of forums with no fixes to this problem. There have been several issues posted involving Linux and Plextor drives but these posts are old with old kernel versions. As far as SATA is concerned, this Linux installation is on a 250GB SATA drive that has not exhibited problems of any kind.
View 8 Replies
View Related
May 6, 2010
I've downloaded the ISO file but not sure if we need an 800 MB because i am trying with active ISO burner and it can not burn the disc.
Please tell me, this is the first time i am planning to use linux. I am a windows user.
View 5 Replies
View Related
Jul 10, 2011
I have been trying to burn an ISO to a blank DVD with Brasero Disc Burner, but every time I try, it gets at around 93% done, then gives me:
"The disc could not be ejected, though it needs to be removed for the current operation to continue"
I have attached a screenshot of the error. And this is not my error screenshot, I have a different DVD Drive. I just attached this one because I didn't want to wait for it to give me an error again so I could take my own screenshot.
Does anybody know why this happens? Or a way to fix it? Or a different software to burn ISO to DVD that is as simple as this one.
View 4 Replies
View Related
Jun 23, 2011
"List.lst" is my file containing my files. How may I burn them onto my blank disc with either growisofs or cdrecord? Usually it is based on a copy of a folder to a temp folder, and burn this folder. but I would like to use a file as input. man growisofs is not so widely full of explanations.. .
View 4 Replies
View Related
Mar 3, 2010
It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...
[Code]....
View 5 Replies
View Related
Jun 3, 2010
I am looking for a video converter that will convert AVI into DVD format to burn a disc. I had a program called convert X for windows 7 and with that I was able to make menu's for the DVD and when it finished converting, it would burn it to a disc.
View 2 Replies
View Related
Apr 16, 2011
I have three drives on my system and I want to put 11.4 on the third drive. My BIOS can select which drive I am going to boot from. I don't want my Windows 7 or Windows XP drives included in grub or grub to over write/install the bootloader on any other drive except the one I am installing 11.4 on how do I do that?
View 2 Replies
View Related
Jul 4, 2011
I've googled and searched here and can't come up with anything. I've got a .MKV file I want to write to a Blu-Ray and can't find software to do it. I assumed it's the same process as a DVD but I guess not. I basically need the Blu-Ray equivalent of DeVeDe.
View 10 Replies
View Related
Apr 1, 2011
If i have, for example, older GParted livecd which i burned in multisession mode(to be able to use rest of its free space later) or other cd|dvd that takes low space on disc itself..can i burn(add) new GParted livecd onto that same disc with choice which one i want run on boot or i need empty cd|dvd? I know that if disk isn't re-writeable with erase option it might be not possible but maybe then there is way to write new .iso and merge with existing content and somehow run from terminal console new one?
View 1 Replies
View Related
Mar 13, 2011
I use Ubuntu LTS 10.04 with K3B. It seems impossible to write a multisession DVD. I went under the Misc tab and selected errr, something like "Begin multisession DVD" (french menu) but then, the DVD is not recognized as a multisession. I have less than 700 MB written on 2 Phillips DVDs.
View 1 Replies
View Related
Jan 7, 2010
I tried the above using an existing multisession CD where data files were previously burned in a different pc using K3b. However, when the burning was completed successfully, the CD could not be read at all. I repeated the process with a blank CD choosing to leave it open in order to add more data later. All went well and the CD was readable but when I tried to add data to the same CD I got the message
Quote:
Appending new files to a multisession disc is not advised.
Already burnt files will be invisible (though still readable). Do you want to continue anyway?
I opted not to continue despite the temptation to see how invisible files can be read.
To sum it up, I find this turn of events absolutely appalling given that Brasero is the default software for CD burning in my system (Xubuntu 9.10). Can anyone tell me how to resolve this glaring shortcoming of Brasero so as to keep all my data files easily accessible in multisession CDs?
View 3 Replies
View Related
Jan 1, 2011
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
View 9 Replies
View Related
Dec 19, 2010
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies
View Related
Dec 6, 2009
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies
View Related
Dec 25, 2010
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies
View Related
Jul 15, 2009
I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies
View Related
Jan 13, 2010
Is it possible to run a .iso without putting it onto a disc?
View 9 Replies
View Related
Feb 1, 2010
When everything was working fine, when I inserted the usb or disc an icon would appear asking if I wanted to mount the drive. Now nothing appears. It's been like this almost a year.
View 9 Replies
View Related
