Muse will not make sound. The jack server is running, but not from the terminal. I can only get it to run with the Jack control. But it IS running. And still, I hear no sound from muse.Muse is connected to the system in the connection window.So, whats the problem?
View 3 RepliesI can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
I have lucid and jack almost the way I want. I can't get apps like flash (in firefox) and rhythmbox to run through JACK. I've followed some outdated guides on the forums here, but I haven't had any luck.
I set up gstreamer to use jackaudiosink, but no luck.
If you ask me, JACK + ALSA should be the default, with maybe a simplified or automated control system for people who don't want to exploit their might
I hate having to close up a massive JACK patch just to watch a quick movie, or having to close Pidgin so JACK will start.
Trying to run Exaile and play music with it through Jack and I get this message: 'The autoaudiosink is missing'. What should I do?
View 2 Replies View RelatedEvidently I need to run Jack Control in combination with Qsynth to play my midi keyboard. That was ok for about a week or so, then Jack developed a problem. This was solved the first time by me unticking the Realtime box in Jack setup, but that has not worked this time. Must I rely on Jack just to have my midi keyboard sound?
The errors messages I receive are:
Could not connect to JACK server as client.
- Overall operation failed.
- Unable to connect to server.
Please check the messages window for more info.
and
12:45:12.427 Patchbay deactivated.
12:45:12.480 Statistics reset.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
12:45:12.533 ALSA connection graph change.....
JACK will not run ( eg. the server just won't go! ) When running Rosegarden I can not access the Qsynth/Fluidsynth.In the Rosegarden "manage MIDI devices" menu it now shows ONLY one "General Midi Device" -thats all, and I do not know where to/how to get access to qsynth/fluidsynth to use soundfontsIn manage midi devices I ONLY get the option of "general midi"and then its only through "14:0 Midi through port 0 (duplex)" and no
other channels are available or offered!If I import one of the devices that come with rosegarden ( like Aleisis ) there is no sound.
Also if anyone knows: (& if I can fix the above) how do I set Rosegarden to use a software synth like ZynAddSubFX on the track/channel? External softsynths do not show up, so how do I assign the channel to use them>
Ps: Rosegarden did not install with the help files, even a complete removal and reinstall does not fix this- hats why I may be asking questions which could possibly be in the Rosegarden manual ( but NOT anywhere online that I've found in 3 days of searching- and I'm a research assistant for cognitive sciences- eg: good at researching! )
Here's the JACK output:
First the error:
COULD NOT CONNECT TO JACK SERVER AS CLIENT
-Overall operation failed
-Unable to connect to server
Heres the message window output:
p, li { white-space: pre-wrap; } 10:39:56.296 Patchbay deactivated.
10:39:56.478 Statistics reset.
10:39:56.549 Startup script...
10:39:56.549 artsshell -q terminate
[code]....
I am trying to use rosegarden, but it says "midi fine, no audio". I found a thread with this same issue and that said to instal jackd and a synth. So I installed qsynth and tried to start jackd. When starting jackd i get this error:
10:16:50.399 Patchbay deactivated.
10:16:50.546 Statistics reset.
10:16:51.021 ALSA connection graph change.
10:16:51.287 ALSA connection change.
[Code]....
I try it for the first time. Befor I changed to linux I used MS Windows 7. There I worked much with SonyVegas for video and Adobe Auditon for music. Yesterday I searched for alternatives under Linux for Audition. And I found much. The screen shots says, that they look similar to Auditon. I downloaded them and installed them. But they doesn't work. One of them say they can't connect to Jack. Some of them say nothing, and so they don't record my line in/microphone input. After a few seconds I of search, I knew that all of these programs uses jack for Audio. I installed it, but the situation wasn't better. Then I found a wiki, and try that: first start jack, than start the program. So I do. But there i get a few error messages: At first I should copy to lines to the file lines.conf. I do it. Then I should be member of the audio group. I do that.
[Code]...
Im a composer and I loaded up on some excellent applications for music creation and notation- so excited..
I start with Rosegarden. Failed to connect to JACK audio server. Try my other applications, same problem.
Basically the JACK audio server just WILL NOT RUN (correctly). I can sudo it and press start, but still it wont "play with" the applications! Heres the error message from JACK (I also get related errors when I try to do ANYTHING involving music creation):
error JACK Audio Connection Kit
-overall operation failed
-unable to connect to server
Here is the "fatal error" from MusE
"Failed to Find Jack Audio Server"
This is the JACK output:
[Code]...
i am using ubuntu 11.04 trying get working Internet DJ Console but i am experiencing problem to connect to the Jack server
i already checked the intructions given in the idjc project webpage, installing the application and configuring the jack
i had already properly set the correct sound card chipset name(snd-hda-intel) on the kermel module and configured to load everytime is boot
installed all the dependecies for jack...but i am still not knowing what i am doing wrong
here i am going to post the info when i try load the application on the terminal:
root@ubuntu:~# sudo echo "@audio - rtprio 100" >> /etc/security/limits.conf
root@ubuntu:~# sudo echo "@audio - nice -10" >> /etc/security/limits.conf
root@ubuntu:~# echo "/usr/bin/jackd -d alsa -r 44100 -p 256" > ~/.jackdrc
root@ubuntu:~# idjc
[Code].....
I am building a Terminal Server Client using debootstrap for work. I found a couple post that suggested that I can change my inittab configuration to not load login. However it is my understanding that inittab has been replaced by upstart. I would like to know how to modify upstart so that instead of the user seeing a login: prompt my script is automatically loaded (rrdesktop)(revisedrdesktop) and the user is brought off a live cd to my terminal server.
View 2 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
Code:
pph-server:~ # zypper up
Loading repository data...
Reading installed packages...
[Code]....
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
I installed jack but it won't start either on real, nonrealtime, terminal or qjackctl.It starts a loop of alsa driver xruns until I stop it.
View 9 Replies View RelatedHow can I get Firefox (and other pulseaudio-using programs) to play while I have jack running? Is there a way to make pulseaudio run through jack? I'm running ubuntu and puredyne distros.
View 1 Replies View RelatedI am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
I would like to hear about a (telnet) terminal for Linux that can run VB scripts. The need is for configuration of a target board. I like secureCRT very much, but I can not use it from a Linux workstation.
View 4 Replies View RelatedFor starters; although I am comfortable with Ubuntu, I don't really understand these midi and jack things,Ok,so I got a midi controller keyboard which I want to connect to my ubuntu pc to start making some music (play piano and possibly try to make some songs). I don't know if my sound card supports midi, but I got a Roland midi-to-usb converter. I connected it to my pc and downloaded Jack Control. When I fire up Jack control my normal music (using audacious) stops (don't know if this is normal). On the window that appears I hit start which results in an error, which I will paste below:
Code:
22:46:06.556 Patchbay deactivated.
22:46:06.560 Statistics reset.
[code]....
I have an ESI Gigaport HD USB external soundcard which I'd like to use via Jack with my Thinkpad T40 running Ubuntu 9.04.This is the card, it has no inputs and 8 x outputs:
[URL]
The card is autodetected on plug in. I can see the 8 x outputs in the Jack connection window but I can't run any sound to it. Anything I connect to it on any of the 8 channels is silent.
I had Ubuntu 10.4 installed and JACK was working excellent. I noticed that gnome was a little more than what I needed so I installed the xubuntu-desktop package. After that install JACK no longer works... I run the command jackd -d alsa and I get a bus error. I did a new install from an xubuntu iso and same error.
View 4 Replies View RelatedSame as above. I've fiddled around, but I can't get Rosebud to work. I have Qsynth, ZynAddSubFX Synth, JACK control, and Rosebud but I can't get any of it to work
View 9 Replies View RelatedCan't get jack to work. Installed from synaptic (running ubuntu 10.10, 64bit).
WHen ckicking "start" in qjackctl (jack control) I keep getting this message:
19:27:58.615 Patchbay deactivated.
19:27:58.616 Statistics reset.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
[Code].....
I just realize that when I plug in my headphones in my laptop, the sound in the laptop's speakers continues to play and I have no sound on the headphones. This is the output of the 'sudo lshw -C sound' on my system:
*-multimedia UNCLAIMED
description: Audio device
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d3000000-d3003fff .....
Why do this? Two reasons:
1) Many of us use JACK for low-latency audio work, but it's annoying to have to turn it on or off to have to allow regular Ubuntu applications to work. It's even more annoying that both can't normally work together -- either JACK or PulseAudio must take control of the sound control. This method allow JACK to do, and PulseAudio just routes to JACK.
2) JACK is kinda super awesome. By routing PulseAudio through it, your regular Ubuntu sound application suddenly get super powers. Pretty easy to do! (Well, we count our blessings in Linux...)
1. DYNAMICALLY You need the PulseAudio utilities and JACK sink:
Code:
sudo aptitude install pulseaudio-utils pulseaudio-module-jack And then run this to get PulseAudio connected to JACK: Code:pactl load-module module-jack-sink pactl load-module module-jack-source Now, go to Ubuntu's sound preferences, and you'll see "Jack sink" in the output tab. If you use JACK Control, you can create a script for the above and have it set up in "Execute script after Startup". Then, PulseAudio will automatically load the JACK sink when you start JACK.
2. BY DEFAULT Edit /etc/pulse/default.pa, and add these lines:
Code:load-module module-jack-source load-module module-jack-sink You can test it without rebooting by restarting PulseAudio. In Ubuntu, PulseAudio is started in the user session, not as a system daemon. To restart it:
Code:
pulseaudio --kill
pulseaudio --start
I can not get sound to exit from my headphone jack, whenever I plug it in, no sounds come out. Notebook model is Acer 3820TG. By the way, I've tried adding the line for HDA Intel with udo gedit /etc/modprobe.d/alsa-base.conf
[code]...
I have a little issue.
I have netbook Asus EEE PC 1001PX (he's got only one jack for headphone and mic, i dont' know how this could work... but anyway)
I have no sound from headphone, from speakers is ok.
I've already edit /etc/modprobe.d/alsa-base.conf and insert the options snd-hda-intel model=asus at the bottom, still nothing.
I've try also to uninstal linux-backports-wireless... and still nothing.
Card: Intel HDA.
Jack runs, but I can't get sound to play through it. Another thing that happens is when I launch jack, all audio in the system, whether its connected to jack or not, goes off. There are no errors or anything in the messages window. And I checked to see if it was connected to the correct interface. I have a mac mini and I run ppc lucid lynx. The system does detect my hardware, and its not muted. All I want to do is use MusE. Is there maybe anyway to run MusE without jack?
View 3 Replies View RelatedI finally ditched PulseAudio and set up my system with a realtime kernel. I'm redirecting ALSA over JACK. The good: - Awesome, I can get <5ms latency without any xruns! (although 23.2 msec as described below is just fine for me) The bad: - I'm a long-time linux audio user, but have got some minor issues which spoil the fun.
1. Without pulseaudio, the indicator applet refuses to show a volume control applet. The old gnome-volume-control-applet (the one with tooltip!) loads but doesn't show in the gnome-panel. Although I can set the volume with envy24control, it's not quite as practical as using the scrollwheel! Any way to fix this?
2. When I launching any application (such as a terminal) from the gnome-panel, a new JACK connection is created, but not cleaned up after closing the application. As a result, the QJackCtl connection list is flooded with alsa-jack.jackP.8528.xx connections (where 8528 is the process ID of gnome-panel). The jack_lsp command line program shows the same (added spaces after every : to get around the smiley filter):
[Code].....
I am trying to set my computer up to do sound sequencing. I want to plug my MIDI keyboard in and record with a sequencer. Running 10.04, was following a tutorial on installing JACK, and my audio stopped working. Since then, I've gone through all guides I can find, some advising an upgrade of ALSA, some saying to use OCC. I've tried both, but nothing seems to work.
I suspect it may have something to do with libjack0. I could not install jackd because it claimed libjack0 to be the wrong version, and for some reason I couldn't upgrade. So I uninstalled libjack0, then installed jackd, which automatically included the version of libjack0 it wanted. After that, I could get the JACK server running, but the computer had no sound.
I will post whatever logs or information necessary to troubleshoot, but I don't know exactly how or what to post. If you need logs, please tell me how to get them.