Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
View 1 Repliessimple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies View RelatedI have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
I think that my computer crashed one time, while I was in middle of installing some new software, and it seems like it have made "dpkg" confused with itself - it thinks, that I still need to install "Wine", but it is allready installed, so everything is allright. But everytime, when I am upgrading or installing any kind of software, it give me this error (just an error, everything still works and installs fine):
Code:
Setting up wine (1.0.1-0ubuntu8) ...
kernel.printk = 4 4 1 7
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
[Code]....
Errors were encountered while processing: wine E: Sub-process /usr/bin/dpkg returned an error code (1)
I'm tried to install bandwidthd on Ubuntu 9.10 and keep getting the following error.I have been looking around for a while and have been unsuccessful in finding a answer.
HTML Code:
$sudo apt-get install bandwidthd
Reading package lists... Done
[code]....
When trying to install php5 I got the following result. Tried to apt-get clean, autoclean, remove --purge then reinstall the mentioned packages without any success.
dpkg --configure -a didn't get any better result.
Code: Select allsudo apt-get install php5
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
libapache2-mod-php5 php5-cli php5-common
[Code] .....
Thought I could just place a hard drive with a preloaded Ubuntu install from another machine (a loaner machine) into this one; change a few drivers and be on my way. Too many errors to count. ALSA; Jack; LiveTex all cratered and I'm tired of fighting this. I've spent more than two days trying to get stuff working and if there's anything I've learned from years of experience there's a time to cut bait and run.
A clean install on the actual hardware I'm using has to be better than the hodge podge I have now.What I would like from the community is recommendations for what to do AFTER the install.
1) where can I find the most up-to-date comprehensive and exhaustive list of repositories for the Synaptic Package Manager?
2) I like to do sound and video processing. I would like to have the program applications
Qsynth, Virtual Midi Keyboard, Muse Score, Csound, GNU Denemo, and many others that either fail to start or produce no sound to work. What, besides the programs need to be loaded in order to make these work?
3) A helpful list of recommendations on what to install along with order preference. In other words 'this needs to be done before this...' on a new Ubuntu install.
In case anyone's interested: Here's a small list of some of the errors I currently have.
AlsaModularSynth - Could not open file.Qsynth1 - Failed to create the audio driver (jack) / Jack server not running.
Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Qtractor - The audio/MIDI engine could not be started. Make sure the JACK audio server (jackd) and/or the ALSA Sequencer kernel module (snd-seq-midi) are up and running and then restart the session.
apt-get install alsa-utils - Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Jack configuration files not found; the list is endless. Plus many errors trying to get texlive to work.
The problem emerged when I started to make the internal microphone and external speakers work [URL]. In either kernel 2.6.32-24 or 2.6.35-15 - cannot install any package with apt-get. Here is the error I get when installing just anything [URL]. Basically, here is it:
Code:
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.3620.log
dpkg: error processing alsa-driver-linuxant (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libxslt1-dev (1.1.26-1ubuntu1) ...
Errors were encountered while processing:
alsa-driver-linuxant
E: Sub-process /usr/bin/dpkg returned an error code (1)
Code:
Unpacking replacement linux-image-2.6.35-23-generic ...
dpkg-deb (subprocess): data: internal bzip2 read error: 'DATA_ERROR'
dpkg-deb: subprocess <decompress> returned error exit status 2
dpkg: error processing /var/cache/apt/archives/linux-image-2.6.35-23-generic_2.6.35-23.41_i386.deb (--unpack):
[Code].....
both update software and synaptic gave the same error? how do i install this package?
I have a little home server running server 8.04 and decided to check for upgrades. One of the upgrades was a new kernal update. It was able to download the update, but errors on uncompressing it. I have even shutdown the server and restarted it. Still no luck.
Here is the screen log from the update process:
(Reading database ... 49993 files and directories currently installed.)
Preparing to replace linux-image-2.6.24-28-server 2.6.24-28.80 (using .../linux- image-2.6.24-28-server_2.6.24-28.81_i386.deb) ...
Done.
Unpacking replacement linux-image-2.6.24-28-server ...
[code]....
when i try to update using terminal and update manager i get this error
/usr/bin/dpkg: 1: Syntax error: "&" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to customize my BackTrack4 image so I can use the live disk with my ati graphic card. While trying to put the drivers with the apt-get install ati-driver command, I get the following message:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
ati-driver
[Code]....
I upgraded to Slackware 13.37 following the instructions in UPGRADE.TXT and now Firefox, Thunderbird, Seamonkey and Google Chrome all fail to run. If I start them from the command line, I get:
Code:
/usr/lib/firefox-4.0.1/firefox-bin: symbol lookup error: /usr/lib/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
libgio appears to be there:
Code:
root@shannon:/home/tsgilvary# ls -l /usr/lib/libgio-2.0.so.0
lrwxrwxrwx 1 root root 22 May 21 19:51 /usr/lib/libgio-2.0.so.0 -> libgio-2.0.so.0.2800.6
I'm also getting an error message logging into KDE that says "ConsoleKit could not be started. ConsoleKit returned an unknown error of 127" which may or may not be related.I have tried uninstalling and re-installing Firefox through slackpkg. I have also tried reinstalling the glib2 package, also through slackpkg. I ran slackpkg clean-system and removed anything I didn't install myself (lmms and openoffice remain). No joy.
Since I'm quite new to Linux I wonder what "Sub-process /usr/bin/dpkg returned an error code (1)" mean ?? Is it RTFM/read the damn logs at /var/log or does someone have an answer to this ?
View 1 Replies View RelatedI want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
I slipped on my expansion drive cable and it disconnected quickly, when I reconnected I got this error: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
View 1 Replies View RelatedGetting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.
hi..
I'm using ubuntu 10.04 and whenever i start nautilus from command line it shows error:
Code:
root@aduait-laptop:~/Desktop# nautilus
Initializing nautilus-gdu extension
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
I am new to k3b and trying to burn an iso and get the following message during the burn process .
"CDrecord has no permission to open the device".
I keep getting the following error when trying to burn a DVD, and unfortunately am none the wiser as to what it means:
Code:
DBus error
This is using both Brasero and K3b, the disk stops writing about halfway through on Brasero and a tenth of the way through on K3b. I'm just trying to burn a data DVD and have tried low & high speeds.
Latest version of 64bit Ubuntu
I was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
Filename.txt
Code:
My First Line
My Second Line
::::While Loop:::
Program:
Code:
while read line
do
echo "$line"
done < Filename.txt
output:
Code:
My First Line
My Second Line
Is it possible to use for loop to get the same output. I have tried executing below code but I get every word of my file being displayed one below above.Is there any way I can modify the for loop code to get the output returned by while loop?
:::For Loop:::
Program:
Code:
for line in $(cat Filename.txt)
do
echo $line
done
output:
Code:
My
First
Line
My
Second
Line
How to compare the contents of two DVDs, for example using the MD5-fingerprint, if all data was exact copied and no burning errors?
View 11 Replies View RelatedSo I have been at this problem for most of the morning and I have run out of ideas: I want to convert and mp4 to avi, and having uninstalled ffmpeg, winff and all other dependencies and followed the fabled guide[URL].... to install a complied version of ffmpeg, I keep on getting this error when trying to convert:
Code:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2avc1mp41
creation_time : 1970-01-01 00:00:00
encoder : Lavf52.84.0
[Code]...
i have installed winff onto my netbook but when i try to run it to covert .ogg to mp3 i get this error.
Quote:
Unknown encoder 'libmp3lame'
I am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
when i start my pc i have an error: Consolekit session error, unknown return code 0 when i click Ok it then starts my session
View 7 Replies View RelatedI've been trying to burn Suse 11.2 to a DVD now for a couple of days but I keep running into trouble. When verifying a disk after burning Suse on it it keeps giving me errors. I've tried Nero and ImgBurn, different burners, different ISOs, different burning speeds (downloaded via torrent and http) but it keeps giving me the verification error.
The only thing I haven't tried is a different brand of DVDs but until now I've never had any problems with this brand.
this is the conky code I found, that displays on conky the way I like, problem is everything shows as 0bytes, and stays that way.
Code:
# UBUNTU-CONKY
# A comprehensive conky script, configured for use on
# Ubuntu / Debian Gnome
#
[Code].....