I have made numerous audio CD's with Brasero, but recently I had to make one and mid way through the burning process I am given this error: Could not decode stream. Or some variation like that. It ruins the cd and after I get the error I can not eject the disc.
View 1 RepliesThis happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
I am having problems burning audio CDs with Brasero 2.30.0 after my upgrade to 10.04. I was trying to burn a .wav file to CD but Brasero ejects the media without burning anything after transcoding the wav file and creating an image. I'm attaching the error log to aid in debugging.I can burn data CDs fine. My burner, a Samsung SM-308B, can't burn DVDs so I don't know about burning them.
View 9 Replies View RelatedI tried to make a copy of my Audio CD and it asked me to install some plugins, so I installed them. After installing them, it still doesn't copy any audio cd. Can someone tell me how to fix this problem, because GnomeBaker takes long time to copy an audio cd.
View 1 Replies View RelatedI am attempting to backup DVDs that I own to .iso format so that I'm able to watch them using xbox media center. I've simply been copying the entire DVD to my HD in .iso using brasero.When I watch the .iso file in XBMC, the audio is a fraction of a second ahead of the video. The gap between the audio and video doesn't seem to change over the duration of the clip.
What are the likely causes of this issue? I've read that it could be a slow processor, little ram, or inadequate video card. If it's indeed a hardware issue, I suppose I'm SOL with my current laptop: a 2006 dell with a core 2 duo processor, 2GB ram, and a middle of the road video card at that time.Is there any software tweak I can explore to get the .iso file to sync properly?Also, I know it's customary for posters to list their system specifications, but I don't know how to call up my software or hardware setups.
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View RelatedI've used VLC for years, in both windows and linux. In windows streaming, you can select "NONE" for a Video Input, and just stream audio. This is not the case for Ubuntu's version.What can I do to stream just audio in VLC?
View 2 Replies View RelatedI have two networked Ubuntu 10.40 machines and I am trying to stream audio from one machine to the other. I find on the surface everything works - I simply installed padevchooser and set the pulseaudio sink to the other machine. Now here comes the problem - whenever I do anything else involving network activity the sound crackles and hangs and it becomes hopeless. I've seen people elsewhere online complaining about crackling in relation to CPU usage but I can't find anyone talking about network usage.
In particular I often work on my office computers over VNC. I try to fire up VNC and it starts to load the remote desktop and the sound completely fails. I assume this is some kind of latency issue? Another good example is trying to watch a video on ..... - the sound plays at first but then as the video is being downloading in the background the stream starts to mess up. Listening to an mp3 in totem with no other network activity works fine.
I have an old computer that I have put Ubuntu on. I would like to connect it to my stereo and stream audio to it from my laptop, so that it plays through the stereo.
I'm hoping to find some software to put onto this old computer to make it work similarly to an airport express. Anyone know of any software like this?
I'm curious; for a current project a server has 4 network interfaces (eth0 and eth2 are in a bonded pair using the bonding module, and then eth1 is being used for management, while eth3 is currently unused but may be utilized for iscsi in the future).
We need to configure two different hostnames, one for the bonded pair (bond0) and one for eth1. Now I have been googling around to try and figure out how the heck this is done but I can't find much of anything. In some methods it mentions using the hostname command, however this isn't persistant after reboot.
Another mentions just editing the /etc/hosts file but I thought that was only used locally? Both bond0 and eth1 will be on separate VLANs with different DNS servers, so it needs to end up with two different FQDN's
I'm trying to figure out the hidden stream URL for the following local radio station here in Tulsa, OK.[URL]
I'd like to be able to play it in Rhythmbox. Is there a way to figure this out?
my problem is regarding .asx live streams. Up till 2-3 weeks ago I was able to listen to [URL] perfectly well with Totem under Ubuntu 9.10.
Since then whenever I want to start the stream, Totem darkens and nothing happens. I've tried Mplayer and VLC as well but neither of them work (but that's not news because they didn't work when Totem did either).
I had a look at the recent package updates in Synaptic to see if any audio-related ones had been changed and I have downgraded libaudiofile0 (to version 0.2.6-7ubuntu2) and gstreamer0.10-plugins-bad (to version 0.10.14-4ubuntu1). The problem still remained, so I updated them again.
The radio chanel works perfectly under Windows, and other .asx streams (for example [URL]) are working fine with Totem in Ubuntu.
I would like to know how to demux the audio from a flash video file (copied from /tmp while browsing a video site). I would prefer to avoid re encoding if possible.
View 5 Replies View RelatedI was wondering is somebody could look at this simple script that I am working on. I cannot get it to output to my home directory. I noticed the message "bad input or output format" in the VLC verbose terminal.
View 3 Replies View RelatedWe have a Jetway JBC600C99-52W-B (Mini-top) with Xubuntu 10.10 and Logitech Z-205 USB Speakers but I have no sound. EDIT: fixed after installing gnome-volume-control and selecting my output device. Now i have a other problem, when i stream a video it plays sound for 1 second and when i click the play button it works fine for a while but after a few minutes the audio stops again. the video plays fine.
View 2 Replies View RelatedI'm trying to figure out the hidden stream URL for the following local radio station here in Tulsa, OK. [URL] I'd like to be able to play it in Rhythmbox.
View 2 Replies View RelatedI have been using the streaming audio feature in Firefox for years, and have upgraded Ubuntu with each new release. I've never had a problem with streaming from my favorite radio stations until I upgraded to Natty. If I know the IP and use Audacious or another client, I can still stream through them-- but not from my browser any more. Flash-based content works OK too.I have upgraded two computers from 10.10 to Natty (desktop and laptop) and it has happened with both. the desktop is the 64-bit system (AMD), and the laptop runs the 32-bit OS (Intel). We have two other computers still running 10.10, and they're both still OK. I have uninstalled and reinstalled the xine plugin (which seems to do most of the streaming), VLC, and a couple of others. No luck. I don't think I see any gaps between the codecs installed for the 10.10 computers and the ones running Natty.I tried Chrome -- same result.
View 1 Replies View Relatedim creatind dvd's from others hd movies and ive seen theres an option to adjust framerate in audio, but ive never using that and i dont see the difference, when i play the video i see audio is syncronized with the video.for example, for a movie with 23,97 fps i converted to PAL (25fps) and i dont do anything to the audio, and it plays sicnronized then ¿Its neccesary to sync audio, and how its done with ffmpeg?
i do somethin like this: ffmpeg -i source.mkv -target pal-dvd -acodec copy mydvd.mpg (is audio fps syncronized because of the target?)if i dont use target, should is use sb like this?.: ffmpeg - i source.mkv -r 25 -vcodec mpeg2video -acodec ac3 -r 25 output.mpg
I just had a quick question. I would like to burn a DVD to disc. The VOBs in the Video_TS folder have 3 Audio tracks: Stereo, Surround, Mono. By default it plays the Stereo track. Is there any way to change this? ffmpeg -i [insert_video_location] in the terminal gives me:
Code:
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 9800 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, stereo, s16, 384 kb/s
Stream #0.2[0x81]: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s
Stream #0.3[0x82]: Audio: ac3, 48000 Hz, mono, s16, 96 kb/s
Will 0x80 always be the default? Normally this wouldn't be a problem, but I'm going to be playing these discs on a DVD Player without a remote (can't help it), so I won't be able to switch the audio on the fly, and they have no menus. You put it in, and it goes straight to the movie.
How's the quality of the sound that gets to your loudspeakers? What components do you have - brand, specs, mode and distance of computer to amplifier?[URL].. Mid and bass sound good.
[Code]...
I am looking at ripping the audio from a very old episode of 'In Our Time'. The episode is so old that it predates the podcast (which of course, would solve all my problems). I would like to use something like icecream or VLC to rip the audio from the 'Listen Now' link on this page. Unfortunately I am having a hard time finding the actual URL. The player itself is a Flash widget, so it is something more complicated than looking for OGG, mp3 or RAM file extensions in the page source. If there are some nifty command flags I should add when invoking icecream on the command line, I am all ears.
View 2 Replies View RelatedI have an Asus EEPC that I use in my classroom whenever I want to show a movie. I normally keep all of my educational videos as ISOs, and then simply move one over to the netbook when needed. I normally use VLC for playback. With the latest upgrade, however, I'm having a few difficulties. No matter what DVD I choose to show with VLC, the audio stream will randomly drop every 10 minutes or so whenever I am using KDE as my desktop environment. In order to re-enable the audio stream, I have to either completely stop playback OR reconfigure the audio output in VLC.
(It does not matter if I change it right back to what it was, I will get audio for another 10 minutes or so). I've also noticed that if I pause playback, sometimes the audio will not re-enable when unpaused. Strangely, however, I do not have this behavior at all when I'm using Gnome as the desktop environment. I get seamless audiovisual playback and never have to fiddle with the audio. Is this a documented problem in Phonon somewhere? How I might better backtrace what's going on?
So I got myself a USB capture card (EasyCap) to use for capturing gaming, digitizing my kids' old VHS movies, etc. It works fine, I've been using VLC to view and record stuff from it, but I've noticed one issue. When recording streams via VLC, even with no other programs running to give VLC as much CPU time as it wants, the audio slowly falls out of sync. I've tried the MP4 (H264/MP3) container and the OGG (Vorbis/Theora) container.
Early on you can't hardly tell, but the further into a movie you get the more out of sync the audio gets, so that by the end of the movie the audio is a good 1-2 seconds off. It's not a set amount either so I can't just split the audio to a separate file then shift it one direction or the other to make up for the difference, because like I said, the offset starts out at nothing and gets progressively larger as the movie goes on. When I select "display locally", the video/audio that is displayed stays in sync, only the video/audio that gets committed to the output file falls out of sync, and it doesn't matter if I play the file with Totem or VLC.
I'm using it on a small IBM machine in my closed ( ) which is my multimedia center, file sharing, router, http server & others. To escape the cable paradox, lately I came up with an idea to stream music from my mobile phone (LG GD880) via bluetooth to my SUSE box (which has it's audio output linked to my HIFI Sound system). This means pairing the devices and of course set the SUSE box as reciever. I found how to accomplish this here and here .
The problem: While trying to complete the above tutorial(s), I found that in /etc/bluetooth there is no ' audio.conf ' file, only ' main.conf '. If I insert the option: Enable=Source in main.conf, it has no effect what so ever. This means that org.bluez.AudioSource will not show up in D-Feet, thus I cannot take the next steps. What can I do? Is there another way to accomplish the audio streaming?
I'm a new openSUSE 11.2 user and lately I've been getting repeated notifications from KDE saying that "the audio playback device HDA Intel(AD198x Analog) does not work" I get audio if I stream videos off the Internet but Amarok can't seem to play audio.
View 1 Replies View RelatedI was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
I've been burning a few linux ISOs lately to play around on a desktop I have (archlinux, Fedora, etc) and a few days ago Brasero stopped launching. I tried to uninstall/reinstall Brasero, but it still didn't work. There we no error messages, it would just try to start up, and quit.
I got frustrated and tried to run Brasero from the command line and got this:
Code:
user@computer:~$ brasero
Bus Error
user@computer:~$
I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
Working on backing up my DVD library. Anyone know why Brasero would fail to copy data due to an input/output error? Movie was Toy Story 2, disc 1.
View 6 Replies View Related