I keep getting the following error when trying to burn a DVD, and unfortunately am none the wiser as to what it means:
Code:
DBus error
This is using both Brasero and K3b, the disk stops writing about halfway through on Brasero and a tenth of the way through on K3b. I'm just trying to burn a data DVD and have tried low & high speeds.
Latest version of 64bit Ubuntu
I was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
View 1 Replies View RelatedI see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies View RelatedI don't know what the difference is between DVD+R and DVD-R or if it matters, lol.
I was trying to burn 2.0 GB of data to a 4.7-GB DVD+R and after it finished burning, I got "There was an error writing to the disk."
When I opened the directory of the disk, it appeared that all of the files were there, but when I tried to open any of them, I got "Could not read from the resource" errors.
I tried burning it again to a fresh disk and it was the same except when I tried to open the files it said variations of "error interpreting file".
I checked the log files and mostly it was unhelpfully generic errors, except for this line:
"BraseroLibburn Asynchronous SCSI error on CLOSE TRACK SESSION: [3 73 04] Program memory area update failure"
That part was the same for both attempts. What could be causing this?
I am trying to burn data to a DVD. I checked scsi number of by DVD drive and found out it as 4,0,0.
I used the command:
I am getting error:
what does it mean? How to rectify this.
Today I want to install Ubuntu on a friends laptop. I finally convinced him to leave Windows and move on to Ubuntu. Ironically this has brought me into problems. I have downloaded the ubuntu-10.10-dvd-i386.iso and ubuntu-10.10-desktop-i386.iso to make a bootable cd/dvd to install Ubuntu. Now both K3b and Brasero give me problems burning one of the .iso files. I already waste some CDr and DVDr. I will share some logfiles for your info;
[Code]....
I am trying to burn Ubuntu Server to a CD-R and I am getting a quick error after each burn attempt. I am burning on the slowest speed. I want to resolve this without using up all of my CD's. When I try to burn the ISO it shows 39.5 MB of free space on the disc when this is a brand new CD-R with 700 MB of free space. When I look at the newly burned disc it looks like Ubuntu Server is on the CD
View 9 Replies View RelatedI'm running Karmic and finally decided to upgrade. When I inserted my blank disc for 11.04 Brasero shows my blank disc as "Blank CD --drive name here -- 17.5 MB free space". I proceed to burn anyway figuring that it's some kind of read error and I have nothing to lose by attempting the write. (I did in fact lose 3 discs, about 50 cents). Disc writes fine but hangs for about 5 minutes during the finalizing stage and then stops with an error.
View 9 Replies View Relatedi'm getting this error in K3B during burning VCD from previously created mpeg files(VCD pal),
View 2 Replies View RelatedTrying to burn with CD/DVD Creator. I can't find anything in the program (settings wise) that will automatically convert mp3 files to wav files. I used to use k3b, and it used to do that. I did try installing k3b, however I am getting glitches in the program. I don't want to covert mp3 files over to wav every time I want to burn a new cd. Does anyone have a suggestion as to another program or place to find the burn setting for encoding?
View 6 Replies View RelatedI have finally ripped my dvd collection to my external hard drive, and now I want to make fair use back ups of my discs (incase the worst happens and I lose my HD and my original disc) I remember there was a tutorial on these forums a while back but I can't seem to find it.
View 1 Replies View RelatedI need something that will convert and then burn a DVD. I have tried almost all of the options on Ubuntu including Devede, K3B, Avidemux, Qauthor, Tovid, Transmageddon, DVDstyler and probably more. None will convert to a NTSC format without trying to create a DVD menu which seems to be the problem involved in playback except for Transmageddon, but it fails to provide the bup and ifo files to go with the video files to get K3B to burn it. I'm able to make DVD's that work on computers, but I want DVD's that will play in my DVD player. Any programs other than the ones I named that can do the conversion without creating a DVD menu and create all the files needed to get K3B to burn it? If needed, I'm converting from AVI. Also,
View 9 Replies View RelatedI am using Ubuntu 10.10 and when I place a blank cd into my drive it detects it but tells me there is no cd burning application, but I have k3b and gnome baker. What is going on?
View 5 Replies View RelatedWhat's the best DVD burning application to use on ubuntu?
View 4 Replies View RelatedI'm having trouble burning a data disk. When I burn it ejects the DVD, then saves a log. Here's the last few lines of its contents:
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/at/spool dev: 700 ino: 13323).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix dev: 700 ino: 13200).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix/pid dev: 700 ino: 13210).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/samba dev: 700 ino: 13247).
BraseroGenisoimage stderr: /usr/bin/genisoimage: No such file or directory. Non-existent or inaccessible: /home/robert/Desktop/Mount_Directory/Read Before You Install.app/Contents/Resources/ko.lproj/설치 전에 읽어보기.pdf
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/cron/tabs dev: 700 ino: 12670).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Error: '/home/robert/Desktop/Mount_Directory/private/var/log/wtmp' and '/home/robert/Desktop/Mount_Directory/var/log/wtmp' have the same Rock Ridge name 'wtmp'.
BraseroGenisoimage stderr: Unable to sort directory var/log
BraseroGenisoimage called brasero_job_error
BraseroGenisoimage finished with an error
BraseroGenisoimage asked to stop because of an error
error= 16
message= "An image could not be created"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
Session error : An image could not be created (brasero_burn_record brasero-burn.c:2839)
Quite a bit of stuff. You can download its full contents. I have no idea what this means and I really would like to make this disk.
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
Got some iso files and want to run them. Are there any programs around to make this task simple?
View 3 Replies View RelatedI have a bunch of 5.1 wavs that I would like to get burned to DVD... anyone know how I can accomplish this? I tried to use DeVeDe, but sort of failed miserably...
View 3 Replies View RelatedI have a Video DVD on HDD. Complete structure in VIDEO_TS folder. Problem is I can't find a program to successfully burn it. Brasero doesn't even have an option for Video DVD. The Video DVD option it has wants to try and do encoding or something. It doesn't even take the VIDEO_TS folder. If you choose data disc and burn the VIDEO_TS folder then the disc don't work in stand-alone DVD players and only works on the Linux pc itself.
Gnomebaker has the same problem as above.
K3B doesn't want to work. Just keeps giving the error "Unable to determine size of image".
So where to turn ? Is there an app for Ubuntu that can actually burn a video dvd to be playable in a stand-alone dvd player ?
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies View RelatedDoes anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.
View 3 Replies View RelatedI've downloaded the DVD version of Fedora 12 with a torrent so it shouldn't be corruped - checked the hash anyway and it wasn't - and I burnt it at a low speed and has my burning program verify that it did indeed burn what it was supposed to. I tested the disc for errors and every time it shows up that around the 70% mark that the DVD has an error.
View 3 Replies View RelatedI want to do is this: choose the order (other than alphabetical) of the files that I burn to a disc.Brasero doesn't allow it K3b doesn't allow it GnomeBaker doesn't allow it Unless I am missing something, I can't figure out any way other than renaming all my files with a single number and/or letter at the beginning of a file name to choose the order of files. This blows my mind it seems like the most "no duh" feature that everyone would need in any Cd burning program. if I am stupid or if the software developers are stupid. (because I really can't see any other options) This is seriously so important (to me), that I will abandon Linux and go back to Windows if I can't do it.
View 9 Replies View RelatedI'm looking for a music player, similar to rhythmbox, but one that allows for drag 'n drop mp3 cd burning capabilities.
If I'm not clear, I want to be able to drag songs from my library into a playlist, or whatever, just like rhythmbox will do for audio cd's, but be able to burn it as an mp3 cd to allow for long playlists.
My music folder is close to 10000 files in MANY MANY different folders. So making a long mp3 mixtape would be much easier if I could do it in the same program that already has every song in front of me.
I have tried to burn dvd's using Brasero, after making the dvd etc I choose to burn as a video, but it gets to around 95% of converting the file to MPEG2 or 4 (Tried both) and just sits there doing nothing!I even left it over night to see if that helped but no joy.
View 3 Replies View Relatedit seems Ubuntu can't just BURN CD or DVD. I've used Brasero, GnomeBaker, K3B - They all miserably FAIL.
Plus, they Break My DVD Drives, after trying sooo Many Times, leaves it behind useless.
I bought 3 DVD Drives: Lite-On, Sony and LG. In a span of 3 Months, UBUNTU completely DESTROYED all of them.
I'm not sure why. BUT first, I find Ubuntu can't burn using above Applications. 2nd, DVD stops working.
Error message from K3B, using it, since it's the most stable I've found. cdrdao crashed, file permissions problems, perhaps TAO will fix this, and a lot more of these crap.
I am burning DVD iso's and they seem to work great I have video output and sound output however as the film goes on the audio gradually becomes more out of sync but if I hit the rewind button on my remote and then play the sound is in sync again for a few minuets. I am using DeVeDe and Gnome Baker to create and burn my iso images to disc and they work great on the computer but not so great on my dvd players I am burning onto Verbatim DVD-R using Ubuntu 10.04 lucid lynx.
View 3 Replies View RelatedToday i tried to burn a dvd but i failed. When i was adding the folders, brasero poped up a message saying that it need to rename some files to make them windows compatible,i accepted the change and proceed. Everything was looking good, but qhen it tried to burn, brasero said it cannot burn the image and failed. Asked if i want to save the log file and i did it, but it has no info!
I tried diferent combinations to burn the dvd (removing the files that need to be renamed, even i tried to burn the files to a iso image) and alwas fail exactly with te same error in the same step.I instaled the gstreamer packages from packman and all looks good.Any idea whats going on? Also, if someone has the same problem, maybe it's a bug in brasero that needs to be reported: if so, how can i get usefull info to report it?
I've bought Earthworm Jim 1&2 from gog.com thinking that i could play it on my old Pentium 2 computer running DOS.
The problem is the game requires it's soundtrack CD, which is suplied by GOG in the form an ISO image with a .inst file that acts as some kind of header(just like a cue file is to a bin image). It contains details about the tracks. But i have no ideea how to burn it. Brasero will burn it, but it's unreadable. K3B doesn't seem to like it.
DOSBox has no problem mounting this type of image, and the game works fine after i've mounted the image.
So the question is, how should i burn this type of file(ISO Audio Image with .inst header)?
I'll also post the contents of the .inst file
Code:
FILE "EWJ1.gog" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
TRACK 02 AUDIO
[Code]....