Ubuntu Multimedia :: Audio Stopped Working After Few Days Of 10.04 Installed
May 1, 2010
ok, everything worked fine after a fresh 10.04 install, and after some days now i suddenly got several disconnects from the wifi somehow (all other devices in house does not get disconnected, so its a local issue), tried to restart networking, and when i reboot, it works for some hours, then cuts of again. but, after the latest reboot, the sound card is "gone" i suddenly have no sound and a wifi that disconnects at will 13:24 everything worked 110% in all previous ubuntu versions
lspci says this about my audio device: Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2 wifi device: 09:06.0 Network controller: RaLink RT2561/RT61 802.11g PCI NOTE! THIS IS AN AUDIO ISSUE ( just ellaborated a bit more to explain what I've done to provoke this )
View 2 Replies
ADVERTISEMENT
Jan 20, 2010
I tried upgrading from Jaunty to Karmic, which borked booting on that partition. I made a fresh install of Karmic on another partition which is booting fine, but I can't get Audio CDs to work, period. They worked in Jaunty and every release before that I had installed. Data CDs work fine in Karmic. I'm using plain ol' Ubuntu 32bit. I'm not sure where to start. There have been other threads where other people had identical symptoms. Either the problem went away mysteriously on its own, or they gave up because nobody believed them. In any case, I'm beginning to wish I had stuck with Jaunty.
View 2 Replies
View Related
Oct 24, 2010
I can't get any sound from either online audio or from a CD in drive. I've watched videos with sound with only occasional problems until today. I have been using MPlayer with internal audio 1 output - analog stereo output. When I start a vid, it will begin to D/L and play, but without sound. When I try to check the volume level everything pauses and then my system freezes. Sometimes it will release in a few seconds, but mostly it won't allow me to close Firefox and if I try to close the tab or window or Firefox, I have to reboot. Sometimes the vid will D/L without a problem, but no audio on playback. Oddly, when I bring up the system monitor, processors will show 1 or 2 cores stuck at 100% while the others fluctuate wildly. Download speed falls to almost nothing with occasional blips or nothing. I checked several sites and they all have the same problem. I have checked my physical connections, and bios settings.
There is an option for a RS780 Azalia controller 1 output Digital Stereo (HDMI) output, but I have not been able to make it work since the system was new. I don't know why.
This is the most recent SYSLOG file. The pulse audio errors have always been there, but since it didn't seem to affect playback, I didn't run it down.
Oct 24 16:04:19 jess-desktop kernel: [ 889.588898] cdrom: This disc doesn't have any tracks I recognize!
Oct 24 16:04:19 jess-desktop kernel: [ 889.609167] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[Code].....
View 1 Replies
View Related
Mar 18, 2011
My Compaq Presario F739WM laptop has a Connexant HD Audio/NVidia MCP51 (reported by lspci) sound card.Ubuntu has always supported the card with no problem except the random popping noise but then I found a work around for that.Now for some reason, when I first turn on my computer and at login screen I can hear Ubuntu noises, yet seems once I login, no more sound or sometimes the successfully logged in sound.
The only changes that I have since the sound worked, was I installed pulseaudio but that caused no problems with that. The other change was a few kernel upgrades and other packages through normal update manager.I have checked that snd_hda_intel driver was loaded in the kernel and in alsa, all seems well.Pulse detects audio output in it's meter.I also tested the sound card to make sure it wasn't bad, in Windows 7 (dual boot) and it wokrs perfectly.
View 4 Replies
View Related
Mar 6, 2010
My printer no longer prints anything with exception to the TestPrint page.Any other job I give it, it says is "completed" in the queue, though nothing has printed. Installed cups again, after a complete removal. No change. Heres what troubleshooting gave me:
Code:
D [06/Mar/2010:07:26:01 -0500] cupsdSetBusyState: Dirty files
D [06/Mar/2010:07:26:01 -0500] cupsdReadClient: 12 POST / HTTP/1.1
[code]....
View 2 Replies
View Related
Nov 16, 2010
Recently audio stopped working in my flash video, when browsing in Chrome or Firefox, video is ok, but no audio. I don't know when did it stop to work. My system is SUSE 11.3 with all software up-to-date.
View 9 Replies
View Related
Jun 23, 2010
I have a media center box running Ubuntu 9.10 x64 and XBMC. One day sound just stopped working on it. I did not install any updates around the time this happened. I have tried using a known working sound card. I verified the main volume is up and everything else in alsamixer looks OK. I have tried connecting known working headphones. Confirmed the kernel sees the hardware and loads to module for it. Confirmed several audio applications have no sound. I've confirmed it is set to use the correct sound card. I even booted into a live disk of the same version if Ubuntu and audio works fine there.
No errors are produced by any application, they act like they are playing audio just fine. The only entries in the logs about this I can find is below.
View 6 Replies
View Related
May 1, 2010
i was recently running the latest xubunto, and decided to upgrade when the upgrade manager offered me however ever since vie upgraded my sound no longer works neither does wine. I have reinstalled wine but nothing has happened but i am at a loss of what to do with the sound. It used to work with no extra configuration before the upgrade i am running a dell inspiron 530.
View 4 Replies
View Related
May 14, 2010
I've tried it before, but not in depth. Anyway, just today, out of nowhere, WINE's audio stopped working. It was working fine before... I'm not sure what happened. I went to the sound, tried a BUNCH of driver combinations, but zip, nada. Whenever I click "Test Sound", all it says it "Audio test failed!", no details or anything.
View 3 Replies
View Related
Jan 1, 2011
So everything was working perfectly on my system. I have Debian SID, with the debian-multimedia repos and liquorix repos for kernels. Flash worked perfectly one boot, then the next boot the video still works perfectly but no audio. I found several "fixes" on the web, including creating .asoundrc in your home directory and another that said to
Quote:edit /etc/firefox/firefoxrc -- change the line FIREFOX_DSP="none" to FIREFOX_DSP="aoss"neither of those have done anything. Have tried using both the flashplugin-nonfree and flashplayer-mozilla, same thing on either. ALL other sound works, smplayer, amarok, system sounds, etc.
View 1 Replies
View Related
Feb 1, 2011
Yesterday I disinstalled with yast java-1_6_0-openjdk-1.6.0.0_b20.1.9.2-0.2.1-x86_64 and java-1_6_0-openjdk-plugin-1.6.0.0_b20.1.9.2-0.2.1-x86_64 (which were installed as part of our sitewide suse 11.3 installation) and replaced them with java-1_6_0-sun-1.6.0.u22-1.2.1-x86_64 and java-1_6_0-sun-plugin-1.6.0.u22-1.2.1-x86_64 (et al) to solve my problem about bad graphics quality in firefox applets as described and suggested in this other postl.That successfully solved my applet problem, but I just discovered it triggered a new problem with openoffice . I tried opening an existing sxc document and got this error message:[Java framework]sunjavaplugin.so could not load Java runtime library: file:///usr/lib64/jvm/java-1.6.0-openjdk-1.6.0/jre/lib/amd64/server/libjvm.so.
It looks like that openoffice is still looking into the old openjdk instead of the new sun java. How can I repoint it to use the current java (assuming it really needs it) ? Apparently even entering openoffice on a new document gives error in a popupOpenOffice org requires a JRE to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under Tools-Options-OpenOffice org-Java ... but since openoffice does not start I cannot access those options I guess (or is such stuff located elsewhere, and if so where) ?
View 5 Replies
View Related
Jul 20, 2010
I have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
[Code]...
View 4 Replies
View Related
Jun 20, 2011
The latest installed kernel stopped working. ( 2.6.35.13-92.fc14.i686) It won't boot. I just get black screen with blinking cursor in top left corner. How do I, or can I, remove and reinstall?
View 4 Replies
View Related
Mar 25, 2010
Suddenly within the last 4-5 days my mail-notification program stopped starting.Googling the error really doesn't give much help, it sounds like the same error message is in tens of libraries.Anyone know what might be going on?Running Ubuntu Jaunty, and already tried reinstalling the program. It's the normal mail-notification from the Add/Remove Programs thing.
Apparently it only does this when it tries to connect to the internet. It runs fine when I'm not connected, but crashes as soon as I hit refresh. (And also crashes at startup when I'm already connected to the internet.)
View 2 Replies
View Related
Mar 11, 2010
Have been using Jaunty for a year now, but today my sound has stopped working. It works fine in windows which should eliminate any hardware problems. When I run a test through sound preferences I get to hear static.
View 1 Replies
View Related
Jul 9, 2010
I'm still using the last LTS 8.04. Getting ready to upgrade to the newest version
Flash was working perfect until one of the last software updates. Now all I get is "The Adobe Flash plugin has crashed."
I tried running:
sudo apt-get install flashplugin-installer and got the following message"
Quote:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package flashplugin-installer
If anyone has any advice it would be much appreciated. I'd really like to get Flash working again before I build a new box and upgrade to 10.04.
View 5 Replies
View Related
Dec 7, 2010
I have been using this fine tuner, however some days ago it wouldn't open any more.In the console I get the following:
Code:
usage: gtkguitune [--option [<arg>]]
options:
[code]....
View 3 Replies
View Related
Mar 16, 2011
Getting a little tired of applications working one day but not the next....this morning it's devede. Firstly it somehow VANISHED from the system...all on it's own. Then when I reinstalled it, it spits this guff out...........
yesterday it was mplayer...I watched a view videos...and then it just started segfaulting on every video including the ones it just played. As such as well as any advice re: devede I would like to hear how to turn all ubuntu's sneaky background crap off so it acts like linux and not windows.
View 4 Replies
View Related
Apr 10, 2011
I have ubuntu 10.10 everything was OK, suddenly skype stopped working, tried the new version, but the same problem exist.
View 4 Replies
View Related
May 2, 2011
in 10.10 my internal audio and my external usb 5.1 soundcard worked fine, and everything was still ok after i upgraded to 11.04. i then tried to install an equaliser called "alsaequal" which required the alsa-driver-1.0.24 package, which i compiled ok. now i've lost all sound and can only see dummy output listed in sound preferences, and no hardware is detected.
sudo aplay -l doesn't detect anything either! i've folled all the steps on the sticky thread in multimedia, i tried purging and reinstalling all the alsa packages which didnt work, and then tried compilling alsa source packages, which wound up with errors. i was following this thread: http://ubuntuforums.org/showthread.php?t=1725874 which suggested running the alsa-info.sh script. i ran this and uploaded the output here:961380d1e9d23fi dont really understand any of this, but it seems to have detected my internal pci card but not my usb card.any help would be really appreciated after the hours spend fruitlessly trawling through these forums
View 6 Replies
View Related
Mar 10, 2011
I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.
View 8 Replies
View Related
Jan 18, 2010
I have an HP dvd1040 lightscribe DVD/CD burner. All through 8.10-9.04 it worked flawlessly. I used DeVeDe to convert tons of stuff and it always burned no problem. Same with my data discs of .jpgs and audio cds. I used Brasero mostly, because there were never any problems.
All that changed with my upgrade to 9.10 Now, the same burner simply will not work with any program. It will read a CD fine and it recognizes blank media, but every time I try to burn something, it fails. I've gone through Brasero, K3B, Gonmebaker, Xfburn. Every one returns an error.
When I attempt to burn, eacj of these programs starts the process and I can hear the drive spinning. It will spin, stop, spin, stop...
I've noticed lots of people having problems with burning and 9.10 but I thought I would ask about specifics with my HP drive.
View 5 Replies
View Related
Jan 19, 2010
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
[code]....
View 2 Replies
View Related
Feb 11, 2010
I'm running 9.10 and I've being using skype for months with no issues, but today my microphone isn't working. I've tested the physical microphone on another machine and it works fine. I've tried skype, sound recorder and neither gets any input. I also have webcam and the microphone on that isn't working either.
View 2 Replies
View Related
Mar 24, 2010
I'm wondering if anyone is having a similar problem as mine when running Hulu Desktop. The application starts fine, but when I try to select anything to watch, the green progress bar continually resets over and over again as it tries to buffer a video, and playback never starts as a result. This happens for low, medium, and high quality. Hulu Desktop was working perfectly fine a few months ago. I've always been running Ubuntu 9.10 (64-bit) with the latest 64-bit Flash pluggins, and didn't have a problem before. Running Hulu Desktop from the command line doesn't reveal any error messages either.
View 7 Replies
View Related
Apr 17, 2010
I left for a week and when i came back, the light-up buttons on my hp laptop no longer worked- they cannot control volume any more.
View 1 Replies
View Related
May 3, 2010
i upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
View 3 Replies
View Related
May 14, 2010
Arista Decoder has decided to simply not open.When called from the menu it shows a window in the Panel but will not open and then disappear.
View 5 Replies
View Related
Jul 2, 2010
I'm using the 10.04 Netbook Edition on an ASUS EeePC 1005HA. Earlier, I had 9.10 Netbook Remix installed. Under 9.10NR, the webcam worked wonderfully in Cheese. Once I upgraded to 10.04NE, the webcam became sluggish to the point where it is now unusable. In video mode it captures about 1 frame per five seconds. Under 9.10NR, it regularly captured 60 fps.
Did the driver package for webcams change significantly between 9.10 and 10.04? I can't think of anything else that would cause this issue due to an OS upgrade.
View 4 Replies
View Related
Jul 15, 2010
In the last week, I noticed that my compaq 6710b physical controls for volume control/mute stopped working correctly. The volume control is not working anymore and the mute "unmutes" itself after precisely 1 minute.
I was wondering:
1/ did an update modify anything
2/ is there a way for me to know if the problem is physical? like a physical signal sniffer of some sort, or a log that indicates that I pressed mute
3/ Am I alone? and if not, does anyone know of a workaround?
Am running 10.4 Linux vaucher-laptop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 08:03:28 UTC 2010 x86_64 GNU/Linux
View 2 Replies
View Related
