Ubuntu Multimedia :: Audio CDs Stopped Working With Karmic?
Jan 20, 2010
I tried upgrading from Jaunty to Karmic, which borked booting on that partition. I made a fresh install of Karmic on another partition which is booting fine, but I can't get Audio CDs to work, period. They worked in Jaunty and every release before that I had installed. Data CDs work fine in Karmic. I'm using plain ol' Ubuntu 32bit. I'm not sure where to start. There have been other threads where other people had identical symptoms. Either the problem went away mysteriously on its own, or they gave up because nobody believed them. In any case, I'm beginning to wish I had stuck with Jaunty.
I just upgraded to karmic the other week and now my webcam isn't working anymore. here is my dmesg output
[Code]....
the last two lines are added whenever I try to run mplayer or skype on the webcam. We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
I can't get any sound from either online audio or from a CD in drive. I've watched videos with sound with only occasional problems until today. I have been using MPlayer with internal audio 1 output - analog stereo output. When I start a vid, it will begin to D/L and play, but without sound. When I try to check the volume level everything pauses and then my system freezes. Sometimes it will release in a few seconds, but mostly it won't allow me to close Firefox and if I try to close the tab or window or Firefox, I have to reboot. Sometimes the vid will D/L without a problem, but no audio on playback. Oddly, when I bring up the system monitor, processors will show 1 or 2 cores stuck at 100% while the others fluctuate wildly. Download speed falls to almost nothing with occasional blips or nothing. I checked several sites and they all have the same problem. I have checked my physical connections, and bios settings.
There is an option for a RS780 Azalia controller 1 output Digital Stereo (HDMI) output, but I have not been able to make it work since the system was new. I don't know why.
This is the most recent SYSLOG file. The pulse audio errors have always been there, but since it didn't seem to affect playback, I didn't run it down.
Oct 24 16:04:19 jess-desktop kernel: [ 889.588898] cdrom: This disc doesn't have any tracks I recognize! Oct 24 16:04:19 jess-desktop kernel: [ 889.609167] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
ok, everything worked fine after a fresh 10.04 install, and after some days now i suddenly got several disconnects from the wifi somehow (all other devices in house does not get disconnected, so its a local issue), tried to restart networking, and when i reboot, it works for some hours, then cuts of again. but, after the latest reboot, the sound card is "gone" i suddenly have no sound and a wifi that disconnects at will 13:24 everything worked 110% in all previous ubuntu versions
lspci says this about my audio device: Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2 wifi device: 09:06.0 Network controller: RaLink RT2561/RT61 802.11g PCI NOTE! THIS IS AN AUDIO ISSUE ( just ellaborated a bit more to explain what I've done to provoke this )
My Compaq Presario F739WM laptop has a Connexant HD Audio/NVidia MCP51 (reported by lspci) sound card.Ubuntu has always supported the card with no problem except the random popping noise but then I found a work around for that.Now for some reason, when I first turn on my computer and at login screen I can hear Ubuntu noises, yet seems once I login, no more sound or sometimes the successfully logged in sound.
The only changes that I have since the sound worked, was I installed pulseaudio but that caused no problems with that. The other change was a few kernel upgrades and other packages through normal update manager.I have checked that snd_hda_intel driver was loaded in the kernel and in alsa, all seems well.Pulse detects audio output in it's meter.I also tested the sound card to make sure it wasn't bad, in Windows 7 (dual boot) and it wokrs perfectly.
Recently audio stopped working in my flash video, when browsing in Chrome or Firefox, video is ok, but no audio. I don't know when did it stop to work. My system is SUSE 11.3 with all software up-to-date.
Today my wireless has stopped working. I have a laptop hp6720s with network controller: Intel corporation PRO/Wireless 3945 ABG [Golan] Network connection (rev 02), dual boot vista/ubuntu 9.10, fully updated (kernel 2.6.31-17). I use a router edimax BR-6204 wg to use the net with other laptop. Till now i have using wicd for controll wireless without any problem, internet was quick and responsive. (Quick connection without any failure).
But today the internet was very slow and wireless starts to connect and disconnects intermitently, doing it unusable. This was what occured when i upgraded from jaunty to karmic and used the network manager from gnome, but then i fix the problem installing wicd. Now wicd behaves in the same way as gnome-network-manager. If i connect directly the computer to the router by wire, i have internet and everything works perfectly. How i can fix the wireless?. How i can do it works with ubuntu 9.10 and?.
My Dell Latitude 2100 worked fine with the pre-installed Ubuntu 9.04. I upgraded to 9.10 and the touchpad stopped working. Restored to factory condition and it again worked fine. I re-did the upgrade, this time asking it not to delete the obsolete items.
I have a media center box running Ubuntu 9.10 x64 and XBMC. One day sound just stopped working on it. I did not install any updates around the time this happened. I have tried using a known working sound card. I verified the main volume is up and everything else in alsamixer looks OK. I have tried connecting known working headphones. Confirmed the kernel sees the hardware and loads to module for it. Confirmed several audio applications have no sound. I've confirmed it is set to use the correct sound card. I even booted into a live disk of the same version if Ubuntu and audio works fine there.
No errors are produced by any application, they act like they are playing audio just fine. The only entries in the logs about this I can find is below.
i was recently running the latest xubunto, and decided to upgrade when the upgrade manager offered me however ever since vie upgraded my sound no longer works neither does wine. I have reinstalled wine but nothing has happened but i am at a loss of what to do with the sound. It used to work with no extra configuration before the upgrade i am running a dell inspiron 530.
I've tried it before, but not in depth. Anyway, just today, out of nowhere, WINE's audio stopped working. It was working fine before... I'm not sure what happened. I went to the sound, tried a BUNCH of driver combinations, but zip, nada. Whenever I click "Test Sound", all it says it "Audio test failed!", no details or anything.
So everything was working perfectly on my system. I have Debian SID, with the debian-multimedia repos and liquorix repos for kernels. Flash worked perfectly one boot, then the next boot the video still works perfectly but no audio. I found several "fixes" on the web, including creating .asoundrc in your home directory and another that said to Quote:edit /etc/firefox/firefoxrc -- change the line FIREFOX_DSP="none" to FIREFOX_DSP="aoss"neither of those have done anything. Have tried using both the flashplugin-nonfree and flashplayer-mozilla, same thing on either. ALL other sound works, smplayer, amarok, system sounds, etc.
I spent over an hour today and over an hour last night googling and trying everything and so far no success. I found many threads with oddly similar complaints, but their solutions haven't worked for me.Last week I upgraded my system, basically a complete overhaul (in the old case). The new system is based on an ASUS MB which comes with VIA VT1708B audio onboard. I installed the latest 32-bit Linux Mint on it. The case's front audio jack doesn't work, the rear audio works but is too quiet.
Things I have tried that have not worked:Different combinations of settings in the basic sound preferences dialog, the GNOME ALSA mixer, and the PulseAudio volume control (I've probably played around with these so much that I've tried every combination)
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
Have been using Jaunty for a year now, but today my sound has stopped working. It works fine in windows which should eliminate any hardware problems. When I run a test through sound preferences I get to hear static.
Getting a little tired of applications working one day but not the next....this morning it's devede. Firstly it somehow VANISHED from the system...all on it's own. Then when I reinstalled it, it spits this guff out...........
yesterday it was mplayer...I watched a view videos...and then it just started segfaulting on every video including the ones it just played. As such as well as any advice re: devede I would like to hear how to turn all ubuntu's sneaky background crap off so it acts like linux and not windows.
in 10.10 my internal audio and my external usb 5.1 soundcard worked fine, and everything was still ok after i upgraded to 11.04. i then tried to install an equaliser called "alsaequal" which required the alsa-driver-1.0.24 package, which i compiled ok. now i've lost all sound and can only see dummy output listed in sound preferences, and no hardware is detected.
sudo aplay -l doesn't detect anything either! i've folled all the steps on the sticky thread in multimedia, i tried purging and reinstalling all the alsa packages which didnt work, and then tried compilling alsa source packages, which wound up with errors. i was following this thread: http://ubuntuforums.org/showthread.php?t=1725874 which suggested running the alsa-info.sh script. i ran this and uploaded the output here:961380d1e9d23fi dont really understand any of this, but it seems to have detected my internal pci card but not my usb card.any help would be really appreciated after the hours spend fruitlessly trawling through these forums
I was been out of using ubuntu for while and came back.However since I have installed Karmic Koala 10 to 15 minutes I start the usb mouse stop working, then the wireless connection and then freezes I cannot do nothing. My Computer is a Laptop Toshiba Intel ATI Video Card.
I've been going through the Comprehensive multimedia and video howto a couple of times and never get streaming going. When testing on the Apple trailers site and this here I don't get it to work. I tried both streaming options set in the thread, (a) Gecko Media Player and (b) MPlayer Plug-in (removing the other one in between) and am getting very annoyed. Currently have option (a) installed.
I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.
I have an HP dvd1040 lightscribe DVD/CD burner. All through 8.10-9.04 it worked flawlessly. I used DeVeDe to convert tons of stuff and it always burned no problem. Same with my data discs of .jpgs and audio cds. I used Brasero mostly, because there were never any problems.
All that changed with my upgrade to 9.10 Now, the same burner simply will not work with any program. It will read a CD fine and it recognizes blank media, but every time I try to burn something, it fails. I've gone through Brasero, K3B, Gonmebaker, Xfburn. Every one returns an error.
When I attempt to burn, eacj of these programs starts the process and I can hear the drive spinning. It will spin, stop, spin, stop...
I've noticed lots of people having problems with burning and 9.10 but I thought I would ask about specifics with my HP drive.
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog] Subdevices: 2/2
I'm running 9.10 and I've being using skype for months with no issues, but today my microphone isn't working. I've tested the physical microphone on another machine and it works fine. I've tried skype, sound recorder and neither gets any input. I also have webcam and the microphone on that isn't working either.
I'm wondering if anyone is having a similar problem as mine when running Hulu Desktop. The application starts fine, but when I try to select anything to watch, the green progress bar continually resets over and over again as it tries to buffer a video, and playback never starts as a result. This happens for low, medium, and high quality. Hulu Desktop was working perfectly fine a few months ago. I've always been running Ubuntu 9.10 (64-bit) with the latest 64-bit Flash pluggins, and didn't have a problem before. Running Hulu Desktop from the command line doesn't reveal any error messages either.
i upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
