Ubuntu Multimedia :: Arista Decoder Has Stopped Working
May 14, 2010Arista Decoder has decided to simply not open.When called from the menu it shows a window in the Panel but will not open and then disappear.
View 5 RepliesArista Decoder has decided to simply not open.When called from the menu it shows a window in the Panel but will not open and then disappear.
View 5 RepliesEvery time I try to reproduce a MKV file I get the following error:
No suitable decoder module: VLC does not support the audio or video format "h264". Unfortunately there is no way for you to fix this.
This was working a few days ago with no issues. I think stop working after the last update (not 100% sure). I have tried to uninstall and installed back again, but didn't work.
I just downloaded Arista to convert avi's to mpegs for DVD's and also to view on a mobile device.I add a file "movie.avi" as the source and device as DVD and then click "add to queue" and the file appears in the queue but nothing happens.Also I believe that I have now downloaded all of the necessary gstreamer packages including the ugly multiverse.
View 2 Replies View RelatedI had some success with handrake to rip dvd's in older versions of ubuntu. i now have a clean install of 10.10 and know that handbrake is not compatible (even tried the ppa of the nighly builds without success). In looking for alternatives, i cam across arista transcoder....which seems perfect for my needs (simple), but whenever i put a dvd in the queue its gives me an error that says conversion failed....no valid dvd title found. this happens no matter what dvd i use and no matter what preset i choose.
View 2 Replies View RelatedI've just installed Ubunto having never had a go at anything linux before. My problem at the moment is trying to transcode downloaded AVI files to use on my Sony Satio. I'm using arista transcoder, and I can't seem to find anything that works for my phone. I've tried about 4 different sony presets (there isn't a specific one for satio) and I've tried a couple of others, but none of the outputted files are recognised by my phone once I've transferred them across.
View 1 Replies View RelatedWhen I'm trying to play an .mp4 file I get the message "you need modules MPEG-4-decoder and H.264-decoder". When searching for these message is "cannot be found". I'm running Fedora13 32-bits.
View 3 Replies View RelatedHave been using Jaunty for a year now, but today my sound has stopped working. It works fine in windows which should eliminate any hardware problems. When I run a test through sound preferences I get to hear static.
View 1 Replies View RelatedI'm still using the last LTS 8.04. Getting ready to upgrade to the newest version
Flash was working perfect until one of the last software updates. Now all I get is "The Adobe Flash plugin has crashed."
I tried running:
sudo apt-get install flashplugin-installer and got the following message"
Quote:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package flashplugin-installer
If anyone has any advice it would be much appreciated. I'd really like to get Flash working again before I build a new box and upgrade to 10.04.
I have been using this fine tuner, however some days ago it wouldn't open any more.In the console I get the following:
Code:
usage: gtkguitune [--option [<arg>]]
options:
[code]....
Getting a little tired of applications working one day but not the next....this morning it's devede. Firstly it somehow VANISHED from the system...all on it's own. Then when I reinstalled it, it spits this guff out...........
yesterday it was mplayer...I watched a view videos...and then it just started segfaulting on every video including the ones it just played. As such as well as any advice re: devede I would like to hear how to turn all ubuntu's sneaky background crap off so it acts like linux and not windows.
I have ubuntu 10.10 everything was OK, suddenly skype stopped working, tried the new version, but the same problem exist.
View 4 Replies View Relatedin 10.10 my internal audio and my external usb 5.1 soundcard worked fine, and everything was still ok after i upgraded to 11.04. i then tried to install an equaliser called "alsaequal" which required the alsa-driver-1.0.24 package, which i compiled ok. now i've lost all sound and can only see dummy output listed in sound preferences, and no hardware is detected.
sudo aplay -l doesn't detect anything either! i've folled all the steps on the sticky thread in multimedia, i tried purging and reinstalling all the alsa packages which didnt work, and then tried compilling alsa source packages, which wound up with errors. i was following this thread: http://ubuntuforums.org/showthread.php?t=1725874 which suggested running the alsa-info.sh script. i ran this and uploaded the output here:961380d1e9d23fi dont really understand any of this, but it seems to have detected my internal pci card but not my usb card.any help would be really appreciated after the hours spend fruitlessly trawling through these forums
I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.
View 8 Replies View RelatedI have an HP dvd1040 lightscribe DVD/CD burner. All through 8.10-9.04 it worked flawlessly. I used DeVeDe to convert tons of stuff and it always burned no problem. Same with my data discs of .jpgs and audio cds. I used Brasero mostly, because there were never any problems.
All that changed with my upgrade to 9.10 Now, the same burner simply will not work with any program. It will read a CD fine and it recognizes blank media, but every time I try to burn something, it fails. I've gone through Brasero, K3B, Gonmebaker, Xfburn. Every one returns an error.
When I attempt to burn, eacj of these programs starts the process and I can hear the drive spinning. It will spin, stop, spin, stop...
I've noticed lots of people having problems with burning and 9.10 but I thought I would ask about specifics with my HP drive.
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
[code]....
I tried upgrading from Jaunty to Karmic, which borked booting on that partition. I made a fresh install of Karmic on another partition which is booting fine, but I can't get Audio CDs to work, period. They worked in Jaunty and every release before that I had installed. Data CDs work fine in Karmic. I'm using plain ol' Ubuntu 32bit. I'm not sure where to start. There have been other threads where other people had identical symptoms. Either the problem went away mysteriously on its own, or they gave up because nobody believed them. In any case, I'm beginning to wish I had stuck with Jaunty.
View 2 Replies View RelatedI'm running 9.10 and I've being using skype for months with no issues, but today my microphone isn't working. I've tested the physical microphone on another machine and it works fine. I've tried skype, sound recorder and neither gets any input. I also have webcam and the microphone on that isn't working either.
View 2 Replies View RelatedI'm wondering if anyone is having a similar problem as mine when running Hulu Desktop. The application starts fine, but when I try to select anything to watch, the green progress bar continually resets over and over again as it tries to buffer a video, and playback never starts as a result. This happens for low, medium, and high quality. Hulu Desktop was working perfectly fine a few months ago. I've always been running Ubuntu 9.10 (64-bit) with the latest 64-bit Flash pluggins, and didn't have a problem before. Running Hulu Desktop from the command line doesn't reveal any error messages either.
View 7 Replies View RelatedI left for a week and when i came back, the light-up buttons on my hp laptop no longer worked- they cannot control volume any more.
View 1 Replies View Relatedi upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
View 3 Replies View RelatedI'm using the 10.04 Netbook Edition on an ASUS EeePC 1005HA. Earlier, I had 9.10 Netbook Remix installed. Under 9.10NR, the webcam worked wonderfully in Cheese. Once I upgraded to 10.04NE, the webcam became sluggish to the point where it is now unusable. In video mode it captures about 1 frame per five seconds. Under 9.10NR, it regularly captured 60 fps.
Did the driver package for webcams change significantly between 9.10 and 10.04? I can't think of anything else that would cause this issue due to an OS upgrade.
In the last week, I noticed that my compaq 6710b physical controls for volume control/mute stopped working correctly. The volume control is not working anymore and the mute "unmutes" itself after precisely 1 minute.
I was wondering:
1/ did an update modify anything
2/ is there a way for me to know if the problem is physical? like a physical signal sniffer of some sort, or a log that indicates that I pressed mute
3/ Am I alone? and if not, does anyone know of a workaround?
Am running 10.4 Linux vaucher-laptop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 08:03:28 UTC 2010 x86_64 GNU/Linux
My sound in Lucid was working fine (for months), and then, for no obvious reason, it stopped working today. I get no sound from any application. I have no idea what could have changed on my system to cause this.When I re-boot Lucid, the login sound plays, and sound works briefly, but it always stops eventually after I login.I am overwhelmed by the large number of different Ubuntu sound problem fixes
View 9 Replies View RelatedFor no conceivable reason, pulseaudio will no longer output via the spdif connection on my onboard sound card.Up until now, various applications could output digitally (mostly using via the alsa plugin) fine. DVD playback would passthrough DD/dts bitstreams if the application was set to communicate with alsa directly. The sound profile in Ubuntu's audio applet would have to be set to Analog Stereo Output for this to work, no idea why.
Now, all the works is digital passthrough via alsa (i.e DVDs). So definitely not a hardware issue. Regular audio either via the alsa plugin or using pulse directly does not work so no music/system sounds/flash etc. All sliders are unmuted (see pics linked below) and the volume meters all show movement with sound activity. Changing the Profile setting does nothing, I thought maybe it had been fixed so digital actually meant digital.This has happened before (sometimes triggered by DVD playback and DD passthrough) but usually fiddling with the mute toggles fixed it.Possibly this has been caused by a recent update.
I can't get any sound from either online audio or from a CD in drive. I've watched videos with sound with only occasional problems until today. I have been using MPlayer with internal audio 1 output - analog stereo output. When I start a vid, it will begin to D/L and play, but without sound. When I try to check the volume level everything pauses and then my system freezes. Sometimes it will release in a few seconds, but mostly it won't allow me to close Firefox and if I try to close the tab or window or Firefox, I have to reboot. Sometimes the vid will D/L without a problem, but no audio on playback. Oddly, when I bring up the system monitor, processors will show 1 or 2 cores stuck at 100% while the others fluctuate wildly. Download speed falls to almost nothing with occasional blips or nothing. I checked several sites and they all have the same problem. I have checked my physical connections, and bios settings.
There is an option for a RS780 Azalia controller 1 output Digital Stereo (HDMI) output, but I have not been able to make it work since the system was new. I don't know why.
This is the most recent SYSLOG file. The pulse audio errors have always been there, but since it didn't seem to affect playback, I didn't run it down.
Oct 24 16:04:19 jess-desktop kernel: [ 889.588898] cdrom: This disc doesn't have any tracks I recognize!
Oct 24 16:04:19 jess-desktop kernel: [ 889.609167] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[Code].....
I have two sound (or audio) hardware on my desktop computer. One is part of my computer motherboard and the other one is a sound card (CA0106 Soundblaster) I bought to replace the other one. When I first installed Ubuntu, my sound card was working properly after I made the necessary changes (system>preferences>sound), but after a few days it just stopped working and the sound from the motherboard is only working.
I reinstalled Ubuntu to my computer a few days ago, and my sound card was working again, but once again, it stopped working after a few days. How can I fix this?
I'm running Xubuntu 10.10 on an ASUS Eee 1215T; the sound hardware on the system is a Realtek ALC259, and there's also sound output through HDMI with an ATI RS690/780 HDMI chip (both according to alsamixer). I was recently fiddling with the sound settings to try to get sound output through the HDMI port. I was successful in that, but I can no longer record sound using the built-in microphone. I'm pretty sure this is something I messed up, since sound recording worked correctly when I first installed Xubuntu, but I'm not sure what I need to do to fix it. I've tried all the promising-looking settings in gnome-volume-control and xfce4-mixer to no avail, and alsamixer also shows everything, both playback and capture, at 100% volume and un-muted; alsamixer also shows that the capture is turned on. I only used these tools (gnome-volume-control, xfce4-mixer, and alsamixer) to get the HDMI output working.
View 8 Replies View RelatedI'm using Ubuntu and my sound was working fine and then suddenly it just stopped working.
It does however, have odd spells where its working (for like 2 minutes) but those spells are few and far between. So basically the sound is not working.
When it isn't working my speaker seem to be making these hissing/screeching noises.
I've tried looking up on Google on how to fix it, i.e. running terminals, etc. but still haven't come round to fixing it. Could someone explain to me how to fix the sound please?
And no, the speakers aren't on mute. I checked volume control and everything is full.
Summary:
Laptop: Acer
OS: Ubuntu 9.something
Sound card: hda-intel
Problem: Sound not working
Im running Ubuntu 10.10 and a couple of days ago, my usb sound deviced stopped working, possibly because of a recent update, as I didn't change something on my system as far as I can recall.My internal sound card still works just fine whatsoever, but my external devices,
E-MU 0202 USB
Logitech USB Headset
which also used to work flawlessly in the past, don't play audio anymore.Although they are still detected and selectable in the PulseAudio Volume Control.I can exclude hardware problems because everything is fine in WinXP.
The problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
View 7 Replies View Related