Ubuntu Multimedia :: 3ddesktop Vs Compiz ?
May 11, 2010Why can I use 3ddesktop (having 3 monitors on 2 nVidia video cards), but not be able to run compiz?
View 2 RepliesWhy can I use 3ddesktop (having 3 monitors on 2 nVidia video cards), but not be able to run compiz?
View 2 RepliesI've got a problem using compiz on Ubuntu 10.04 64bits with nvidia proprietary driver (195).
When I enable compiz, viewing videos is not fluid, there are jerks on video, and not append if I disable compiz. Is anyone got the same problem ?
All 3d applications run with a solid black screen, and compiz will try to revert to the fallback wm, even though I have the new nouveau/gallium setup in 10.10.
glxgears appears to *think* it has a working screen, but it stays blank:
Code:
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
3570 frames in 5.0 seconds = 713.841 FPS
3298 frames in 5.0 seconds = 659.541 FPS
[Code].....
a starter video for compiz and mouse pointer trails and a couple more things might be of use to some of you here
View 1 Replies View RelatedJust upgraded to 11.04 and compiz runs like absolute dogshit.I'm using ATI Proprietary drivers which worked amazingly before the upgrade.
View 9 Replies View RelatedI'm planning to upgrade my wife's computer when 10.04 comes out, what is a good cost effective video card to support compiz effects?
View 5 Replies View RelatedEver since I upgraded my video driver (the proprietary NVIDIA drivers) to 270.18, I have been experiencing lag when typing and when using Compiz as my WM. I can work around both problems by switching the WM to Metacity, but obviously I don't want to continue using that. I have tried changing my Compiz settings but to little avail. If you want my OS and graphics card, the OS is Ubuntu 10.10 and the graphics card is a NVIDIA GT 330M.
View 1 Replies View Related[URL].. according to above link if i want to change the shape of rotating cube. for that the option Cube Reflection and Deformation, is not available to me.. what to do for that.
View 3 Replies View RelatedUsing either MPlayer or mplayer2 under the video player SMplayer, when clicking on any drop-down menus, the video will freeze and then skip. Once the drop-down menu animation has completed, the video playback will play normally. This happens when using VDPAU to play back H.264 MKV files. Audio playback of the video is never interrupted. why VDPAU will not play nice with SMplayer & Compiz?
System Info:
AMD BE-2400
1GB System Memory
Natty Narwhal 11.04
Ubuntu Classic with Effects
Nvidia 9500GT
Video Driver 270.41.06-0ubuntu1
I installed Debian Sid yesterday, then I installed KDE. Now I want to install Compiz using this guide: http://wiki.debian.org/Compiz but it says I need to edit xorg.conf file, which doesn't exist for me. I'm trying to install Compiz for hours, so I think there is no other option for me than posting this problem.
View 14 Replies View RelatedTwo of the most impressive bits of software I have found yet but... Since I installed compiz, VLC is showing an invisible area where the video should be. It does this with all formats and remains this way even if I switch back to Metacity from Compiz. Basically I can see the frame and decoration for the window but no contents. When I maximise I just get black. Other video apps work fine but I'd like to get my beloved VLC working again if possible. Of course Compiz installation could be unrelated and a red herring.
View 5 Replies View RelatedI am running Ubuntu 10.04 as a guest on virtual box installed on windows 7. I have installed gtk-recordmydesktop(rmd) using synaptic package manager. rmd do not recognize any window when I use the 'extra' visual effects i.e. compiz effects.
View 8 Replies View RelatedI tarred my system (NVidia based) and restored it on 2 other different machines. (Intel g965 and SIS 661/741/760) On both of them I see
Code:
$ sudo lshw -C display *-display UNCLAIMED As a result I can't enable compiz (visual effects), cairo dock is unusable (noGL version, GL won't run at all) - it shows a huge black rectangle as its background even when the dock is hidden. I think the problem is that the video driver is not enabled, I need your help making it work. After the restore during the 1st boot X complained that it can't find NVidia and showed me the options use default settings generate new settings (I used this one) So now one of the PCs:
[Code]...
gtkrecordmydesktop gives me crummy playback if i have compiz on is there a recorder that does not give this problemi attached a screen shot of the playback issue
View 1 Replies View RelatedI now that there is a an effect that arrange all your windows nicely in a matrix (all windows have the same size). What effect is that?
View 3 Replies View RelatedI'm using currently ubuntu 10.10. Having a nvidia gt220 with the proprietary drivers. I used compiz for a while. It works quite well, with vsync on and so on. But one thing bothers me all the time: In any opengl program (like a game or the unigen benchmarks) or on video playback (no matter if its the default video player, xbmc or what ever) I see some kind of stutter. About every second or so it jumps one frame forward and then two back. Till the next second it plays fluid.
To be able to observe this easily you need a video (or a opengl scene) where the whole screen scrolls in a medium speed but smooth. Than you can observ how it "jumps" every second. If the scrolling is too slow you wont observe it. Now, if I turn composite off this disapears. All play fluid. Ofcourse I get tearing as long as I do not also disable the composite extension in the xorg.conf, but this is another story. Is there a possibility to fix this stuttering with compiz active? Cause I use this pc to watch movies quite often so this would render compiz unusable.
i have ubuntu studio 10.04 installed and this is my second installation of the system. now that i have updated the system, got the fglrx drivers for my ATI HD5750, installed compiz-config-settings and glx-dock (aka cairo-dock). the first time i started the glx-dock, half of the dock was visible and it was distorted all over. so i ran compiz-config-settings for the first time and saw that it wasn't also working. then i tried to find a solution for a few valuable hours because it was essential to customize the feel of an OS but i think i have came to a point that i should stop trying to learn things that i see for the first time but ask and hope for the best (soon). anyway i should say that compiz and cairo dock was working the first time i installed the system. now when i run compiz-check, it gives the following output:
Code: Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Device 68be
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia) ok AIGLX doesn't start, so i check Xorg.0.log and it says: (it has loaded and initialised AIGLX but maybe i misunderstand something, anyway you should see for yourself)
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux ubuntu 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=826145cb-591c-4a6e-9d6c-62fba6898f38 ro quiet splash
Build Date: 10 December 2010 05:53:04PM
[Code]....
Been using Maverick on my Dell Studio XPS for many months without issue. About a week or two ago, compiz has been acting funny and using a lot of cpu time, making everything "choppy," especially after resuming from suspend. I've googled and searched the forum, but all the related posts seem to be several years old.I tried selecting the previous kernel but it didn't help. Was there a bad update to compiz or ati graphics?
My info:
Code:
> lspci | grep VGA
21:02:00.0 VGA compatible controller: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series]
> grep -i driver /etc/X11/xorg.conf | uniq
Option "VendorName" "ATI Proprietary Driver"
Driver "fglrx"
[Code]...
I have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:
Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:
1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.
2. Reinstall nvidia-current - tried multiple times with no change.
3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.
I just got my new version of Debian, and under System>Preferences, near the top of the list, there should be a CompizConfig Settings Manager. But it's not there. I've tried apt-getting compiz, but it says I have the latest version out there. So I don't know what to do next.
View 8 Replies View RelatedI just installed Debian (Lenny) with xfce, and I was wondering...how do I install compiz and get it working?
View 1 Replies View Relatedcompiz is running just fine with compiz --replace, but it still not starting automatically with gnome.
View 4 Replies View RelatedI enabled Antialiasing in nvidia-settings and added "nvidia-settings -l" in a file /etc/X11/Xsession.d/, i knew it worked because sync to vblank works with glxgears and stuff. I enabled 4x antialiasing, allow flipping and texture sharpening in nvidia settings, i also enabled all instances of sync to vblank in nvidia-settings i disabled dynamic twinview i also enabled sync to vblank in ccsm and manually set the refresh rate to 60hz the cube is smoother now, but when i move windows around, i get slight tearing at the edges, when i disable AA and restart compiz, the tearing goes away. There is no tearing when i move windows vertically: It only happens when i move horizontally:
Debian stable 2.6.32-5 amd64
nvidia-glx 195.36.31-6 0
nvidia GT 230M
After a few tries, I managed to install Ubuntu on my 3rd generation Macbook Pro (MacbookPro3,1). I installed the proprietary drivers for the Nvidia graphics card and got all the other features working with the information from this page. However, I am having various problems getting the screens working as I would like. When my laptop is at my desk, it is connected to an external 24-inch monitor via DVI, however I regularly disconnect this screen when I go to uni etc.
Ideally I would like Ubuntu to do the following (all of which I can do in Windows and Mac, or the equivalent thereof): Auto-detect when the external monitor is plugged in, set that monitor as the primary screen (with gnome panel etc). And auto-detect when it is unplugged and set the laptop screen as primary.
Support moving windows between both screens Compiz on both screens Separate colour calibration on each screen So far, I have only been able to get a subset of these working at once. I got 2 working alone, without any compiz and the colour calibration only worked on the laptop screen. I got 3 and 4 working without being able to move windows between screens. I have not been able to get 1 working at all - when I disconnect the monitor, I have to tell the nvidia control panel it is gone.
Is there any way to get all four of these things working? I would be willing to sacrifice 3 if 1, 2, and 4 were all working. (I posted this thread to Apple users as well, but I figure there will be more activity here).
I use an online screencasting java applet called screencast-o-matic to record my screen. While recording, I use Compiz's annotation tool. Normally this tool works great, but for some reason while I'm recording, it gets very laggy (drawing is way behind the mouse movements) and less smooth. For example, drawing a circle at a quicker pace not only causes lag, but also makes the circle look more like a polygon with straight lines. While this is happening, my CPU also spikes, with large strains showing up on the java process. I'm running Ubuntu 11.04 with an intel i7 processor. Any ideas as to why annotation lags badly while screencasting, and any ways to fix it.
View 3 Replies View RelatedI have compiz running in XFCE4 on lenny, and when the cube rotates it rotates 2 cubes. Is there any way to change this behavior? I would like a single cube to rotate.
View 2 Replies View RelatedI had a Compiz update two weeks ago, this update came from the official repository of Debian. So everyone had this update, this update did not had a positive effect. The extra plugins on both my desktop and laptop can't be enabled now. Such as Expo or the Animations. I can just use the basic stuff. There have been some partial upgrades ever since for Compiz, so I guess they are still working on it. But my question is; am I the only one?
View 7 Replies View RelatedI am using the last Debian Lenny (506) + the last ATI Privative Driver (10.9) + Compiz + Gnome, and, I have a great Slow Resize windows problem.When I try to resize a window (Alt + middle click) is very very, VERY!! slow. I try to find the solution browsing. After search
and read forums and threads about this, couldn't find it
Although "Shadow Windows" is set to "any" in CCSM I get no shadow under gnome panels. I tried adding (any) & class=Gnome-panel, but this does neither do anything at all. I'm using Debian Sid amd64, Compiz 0.8.4, X 1.7.7. Video card: ATI Radeon HD4570.
View 12 Replies View RelatedDebian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
View 6 Replies View Related