Debian Multimedia :: Compiz Running In XFCE4 On Lenny?
Feb 25, 2010I have compiz running in XFCE4 on lenny, and when the cube rotates it rotates 2 cubes. Is there any way to change this behavior? I would like a single cube to rotate.
View 2 Replies
ADVERTISEMENT
Debian :: Install Absolutely Minimal Xfce4 On Lenny?
Feb 15, 2011I'd like to install absolutely minimal Xfce4 without any extra stuff like xfce4-panel, taskbar, calendar etc.
How to install it on Lenny?
Debian Multimedia :: Just Installed Squeeze / Running Back To Lenny
Feb 6, 2011 I could not get the hardware to work with Lenny's ancient drivers, so I gave up and decided to upgrade to Squeeze.Well, the hardware works (except sound), but KDE4 is a such a disaster that I want to run not walk! all the way back to Lenny. I'm stunned that after four years of active development, this desktop still doesn't have something as basic as keyboard shortcuts or the ability to place icons where YOU want them.
The widgets frustrate me to no end. The new K menu is impossible to navigate. I'd rather hang myself than use Dolphin as a file manager. KDE4 gives me more notifications than MS Windows' crapware. And it's UGLY !!! The "Oxygen" theme makes me want to tear my eyeballs out.
Debian Installation :: Wheezy- No Running Instance Of Xfce4-panel?
May 15, 2011I posted this same issue in the Xfce support forums this morning. So far, no replies. This morning, using Synaptic, I finally upgraded my main Wheezy Xfce 4.6 computer to Xfce 4.8. There were 225 upgrades, plus 33 new things to be installed. It has been about 2 weeks since I last fully upgraded that system, so I'm sure that not all of today's upgrades were directly related to Xfce 4.8.
I waited to upgrade as long as I did because Wheezy's been getting a steady stream of Xfce 4.8 upgrades for the past several days -- I wanted to wait until that stream stopped, to reduce the chances that I would run into an upgrade problem that was on the verge of being fixed.
The only issue I had was that, in the middle of the configuration step (for lib6, I think), it asked me to either stop or restart xscreensaver before continuing (so that I wouldn't get locked out of the current session), so I completely stopped xscreensaver.
Debian Multimedia :: Debian Wheezy Xfce4, No Reboot, No Shutdown?
Sep 3, 2011i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies View RelatedHardware :: Debian Lenny - Nvidia GTX280 - Driver Version 195 - Compiz Fusion - Shell-Caracters
Sep 8, 2010I have installed Debian Lenny and the Driver for an NvidiaCard GTX280. As this card is not supported by the debian-repositories, i have installed the driver from the nvida-Site. It works ok, but there's one thing: When i have compiz fusion activated, the caracters in the shell are sometimes hidden (pls see attachment).
View 4 Replies View RelatedDebian Multimedia :: XFCE4 Shutdown Just Goes To LightDM Greeter
Apr 7, 2015Since I've made the switch to Systemd, I've been having various problems with LightDM.
The most interesting and frustrating problem is when I choose Shutdown or Restart from the XFCE4 shutdown menu, the XFCE4 session closes but then the lightDM greeter pops back up. The system doesn't even try to shut down.
Its as if restart and shutdown both act the same as the Logout button.
Im running XFCE4 4.12 (but same behaviour on 4.10). I have the latest LightDM and the latest Systemd.
Debian Multimedia :: Xfce4 Desktop - Screen Goes Dim After 10 Minutes
Jun 9, 2015I'm using the xfce4 desktop and I removed the default screensaver. The screen goes dim after 10 minutes and I was wanting to know if there is a config file where I can adjust the time.
Searching synaptic for "screensaver" shows xdg-utils installed which has xdg-sreensaver but I'm not sure if that is really the program that is dimming the screen. Anyway, I couldn't find a way to change the amount of time that it takes to do so.
Debian Multimedia :: How To Move Safe From Xfce4 To Gnome 3
Jul 2, 2015I use debian 8 with xfce. but I have big problem with sound and I want move to default desktop manager gnome 3 in debian . I install many pakages ?
how I can move safe from xfce4 to gnome3...
Debian Multimedia :: Xfce4 Panel Bar To Bottom Of Screen
Nov 14, 2015Upgraded my system and again gnome got messed up. Mate doesn't run on Debian 8 so decided to try XFCE4.
How can move the panel to the bottom of the screen ?
I go to applications -> settings -> panel
I can choose between vertical / horizontal / deskbar.
Debian Multimedia :: XFCE4 Icon Themes Gone / Not Applying
Mar 9, 2010I don't know what happened here, but running debian lenny and all of a sudden my icon theme is rodent, a decent chunk of icons are not showing up, and when I go to the icon changing panel they all look the same - like rodent! Icon themes I put in ~/.icons don't show up, and the icons in /usr/share/icons are permission as such:
root:root
755
Debian Multimedia :: - Save Configuration Panel Of The Xfce4 ?
Sep 29, 2010Original tittle, edited for add the tag [SOLVED] on subject How can I save the configuration of panel of the xfce4 ?
I have a pretty panel configured on my xfce4 (debian lenny). How can I save the configuration of my panel ? I'm afraid to lost my configuration in some situation of error.
Debian Multimedia :: Gnome Application Alternatives For Xfce4?
Jan 24, 2011I've been Gnome user since I made switch from Ubuntu to Debian. But now I want to try xfce in Debian, but I do not know well what are alternatives for Gnome applications there. I haven't used xfce since Ubuntu 9.10 (Xubuntu).some alternatives for theese apps:
Archive Manager: (like file-roller)
Text Editor: (like gedit)
Screenshot: (like gnome-screenshot)
[code].....
Debian Configuration :: Strange - Running Php5 On Debian Lenny And Apache?
Jan 18, 2010i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
Debian Multimedia :: Xfce4 Power Manager Using Too Much RAM After Jessie Upgrade
May 11, 2015I recently upgrade from wheezy to jessie. I had a problem with the icons and solved it. Now when i place the xfce4-power-manager-plugin on the panel, the plugin is using more RAM than it needs. Currently its using 960 MiB. Yesterday it used about 3 GiB of RAM. It doesn't happen if the plugin is removed from panel.
Command in task manager:
/usr/lib/x86_64-linux-gnu/xfce4/panel/wrapper /usr/lib/x86_64-linux-gnu/xfce4/panel/plugins/libxfce4powermanager.so 20 20972767 power-manager-plugin Power Manager Plugin Display the battery levels of your device and control the brightness of your display.
Debian Multimedia :: Xfce4-governor-plugin - Package Is Missing ?
Oct 18, 2010I am using xfce in squeeze and I like xfce4-governor-plugin. But this package is missing in debian, pls can you add this plugin to squeeze repository. xfce4-governor-plugin_0.1.0 works in squezze very well.
View 1 Replies View RelatedDebian Multimedia :: Squeeze (Xfce4 Archiver) Can't Open Files?
Dec 23, 2010This is about the Squeeze (0.2.3-8) archiver in Debian Squeeze. I may be missing a dependency, but is Squeeze incapable of opening files inside archives? I created a generic archive with "tar -cvf arxiv.tar file01.txt" and Squeeze segfaults when I try to double click to open the file (file01.txt) stored in the archive (arxiv.tar).
Also, after experimenting with Squeeze on the command line, it seems the "-n" option works, but results in an orphaned gui window; the "-x" option will only extract to a directory which already exists (which is o.k., but should be documented); and the "-d" option doesn't follow the general syntax in the man page "squeeze [OPTION...] [archive name]", which isn't bad, but sure does make it unnecessarily cumbersome to use, and also, the gui runs (blinks for a split section) for no clear reason. Now it would be silly to use command line squeeze over tar, but the man page for Squeeze begins with: "Squeeze - modern and advanced archive manager for Xfce".
I would like a gui archiver/extracter to use with Xfce4 without all the QA problems. Unless I'm doing something really wrong, this software doesn't seem to be ready for release at all, and the upstream version has not changed in a long time.
Debian Multimedia :: Xfce4 - Failed To Mount External Hard Drive
May 30, 2015I can't mount my external hard drive with the graphic interface of my Xfce desktop anymore, since the latest upgrade.
The disk does show up, but when I try mounting it, I get a pop up window telling me that :
Failed to mount "My_Passport". Not authorized to perform operation.
Debian :: Running A Gnome Lenny LiveCD In Virtualbox?
Jul 31, 2010I have created a squashfs live CD from HD (Gnome - lenny ). It runs like a charm in a "fromhd" mode but when I try the iso or even a burned CD in virtualbox on the same PC, X does not start. It says:
Failed to load module "type1" (module does not exist, 0) /usr/bin/xorg: symbol lookup error: /usr/lib/xorg/modules/drivers//vesa_drv.so: undefined symbol: xf86GTFMode
Networking :: Debian Lenny 5.0.7 AMD 64 Connection Stops Running?
Feb 23, 2011I have a Dell PowerEdge 2900 on which I just installed from scratch Debian Lenny 5.0.7 AMD 64bit. I am having issues where when I ifup a second nic card the server will maintain connectivity for a period then all connectivity is lost and I have to ifdown all eth interfaces and bring them back up to regain connectivity. Here's how the server is laid out: I have 12gb or ram with 2 Xeon 5450s in the server, as I mentioned it's a Dell Poweredge 2900. It has a build in Perc6i raid controller with 2 drives in Raid 1 for the OS and 4 drives in Raid 5 for storage. It also has a Perc 5e card in it connected to 3x6TB raid arrays. I mention this because they are all sharing the PCI bus if that matters.
The nic cards I started with were the two builtin Broadcoms and lspci reports them both as:
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
After I started experiencing the problem I added an inexpensive Trendnet based off the Realtek RTL-8169 chip rev(10). Debian sees this card without any need for additional drivers. The Broadcoms required the non-free network drivers provided by and built against the Debian kernel (no custom drivers). One nic card is configured with a public IP address and I use IP tables to reign in the traffic to http and https only. There is also an outbound openvpn tunnel from this machine back to our offices through this interface. The second nic card is hard wired to a mac mini directly and is assigned an 10.x.x.x address. I am able to see the mac mini from it.
The amount of time the network connection stays up doesn't seem to follow any set pattern. I have flood pinged the 10.x.x.x while running apt-get and one time it fails, the next time it doesn't. Sometimes the network connection degrades and I can do an nslookup one second and get nothing and the next I get a response. Finally though it fails and it requires me to ifdown the eth connections and ifup them to get them going again. I don't really see anything in the logs. I've looked in kern.log, messages, syslog and pretty much came up empty, but not 100% certain I'm looking for anything more subtle than obvious errors. The routes all look good too.
Naturally, as Murphy's Law would have it, this is a remote server at a colo so that doesn't make troubleshooting any easier. What I have done to temporarily prevent me from losing complete access to the server is setup a cron script that runs once a minute and pings something. If there is 100% packet loss, it restarts the nics and I'm going again for another arbitrary period of time. Lastly, this has no effect on the OS running. I don't have a hung system when this happens just a trashed network connection.
General :: Apache Not Running After Installing On Debian Lenny
Jul 10, 2010I just installed apache2 on my VPS (running Debian 5 (lenny)). Problem is that when i start apache2 nothing happens.
Code:
ps ax |grep apache
and
Code:
ps ax |grep httpd
returns only the grep process itself, and
[Code]....
Debian Multimedia :: XFCE4.8 Wheezy (Testing) - Duplicates Entries In XFCE Menu?
May 5, 2011First of all - to refresh icon on desktop i've had to install gamin instead fam (after this, icons on desktop was refresh correctly). I don't know that have connection, but who knows. Anyway - my problem. Things marked as red are duplicated entries in menu. How to simple delete them? Menu are not refreshing too - i unmark "Inne" (Others) in alacarte, but it's still visible.
View 2 Replies View RelatedDebian :: Setup Vnc Server And Keep It Running In The Background After Restart On Lenny Workstation?
Sep 23, 2010How to setup vncserver and keep it running in the background after restart on Lenny workstation? The admin should be able to connect every time via vncviewer to this workstation.
View 2 Replies View RelatedDebian :: Change Boot Loader From Grub To System On Running Lenny Without Damage It?
Feb 1, 2011How to change boot loader from Grub to syslinux on running Lenny without damage the system?
View 1 Replies View RelatedDebian Multimedia :: How To Install Multimedia Codecs Under Lenny With Gnome
May 29, 2010How to install Multimedia Codecs under Lenny with Gnome?
View 3 Replies View RelatedDebian Multimedia :: Xfce4-power-manager Doesn't React To Power Button / Fix It?
Jun 4, 2010I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
Debian Multimedia :: Error - It Is Perfectly Working With Debian Lenny
Apr 23, 2010I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies View RelatedDebian Multimedia :: Exist Any Repository For Debian Lenny With Games?
Aug 28, 2010Are exist any repository for debian lenny with games like nexuiz vdrift planeshift etc?
View 2 Replies View RelatedDebian Multimedia :: No Sound In Lenny?
May 2, 2010recently installed lenny (5.0.4). I can't get any sound whatsoever (except pc speaker). I had to muck around with vlc to get video working, that works fine but there's still no sound. I have a C-media CMI8738 sound card, I've run alsaconf in root which seems to work fine, I've mucked around with alsamixer (v1.0.16) changing volumes and muting things but haven't had any change. Computer is an AMD Athlon xp2500.
View 5 Replies View RelatedDebian Multimedia :: Lenny Hangs After GDM
Jul 14, 2010I have a computer that is off the internet. It usually works right since I took great care to make it as 'clean' as possible from outside forces.Lately it just hangs whenever GDM is about to start.How to troubleshoot?
I tried a live CD SystemRescueCD, it works even the desktop environment works. so I e2fsck the partitions of the hard drive okay, memory test/checked the 1.2GBRAM -- passed other than these, I have no clue how to troubleshoot.Oh, I also used an nvidia driver which I forgot how I did it because it was installed almost a year ago.