I installed a fresh version of Ubuntu on a computer, but I'd like to copy over my settings from my old installation. Where are settings for Gnome (panels and menus) and other applications (chromium, thunderbird, ktorrent, pidgin, skype, code::blocks, amarok) located?
View 4 RepliesI have a bunch of gconf settings that I change by default when I install Ubuntu on someone's machine and thus I've created a script to make it easier after a fresh installation. Here is a list of changes I make so far:
[Code]....
However, I'm looking to remove the top panel and have only the bottom panel like I have set up on my machine. The gconf settings seem to be pretty complex and I'm not sure which keys I should be changing to remove the top panel and include the settings I have currently for the bottom panel (e.g. Menu Bar | Shortcuts | Window List | Notification Area | Clock)
I want to re-install my 10.04 because Anthy (app to write in Japanese) won't work any more, whatever I try; how do I proceed? I'd like to find a way to keep my files/Firefox settings and bookmarks etc. intact during the re-install, just like I upgraded from Koala to Lynx. Is that possible? If so, how do I do it?
View 4 Replies View RelatedIs there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies View RelatedI like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
View 2 Replies View RelatedI have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
View 2 Replies View RelatedJust setup a new install and want to get the packages from the other system over to the new system without spending all day looking them up and apt-get'ing them. I am so ridiculously noobish when it comes to ubuntu and linux in general but I'm sure there is a quick fix or someone can point me in the right direction.
Have ssh installed on both machines and quick access to both but the couple places that I have searched on the internet have spooled up nothing that has worked.cliffs: new install needs old packages, easiest way to get them to the new system?
i am going to be upgrading to a ssd and would like to move /var and /tmp to a separate partition (it can be separate but preferably the same) how would i extract /var and /tmp to a different partition (need fstab lines and permission settings) when i get another stick of ram i will make /tmp into a ram disk here is my partition layout
View 3 Replies View RelatedI've been setting up a media server on a an actual server machine I picked up dirt cheap, and had it running xUbuntu fine. gave it a 5gig root directory, 5gig swap partiton, and three 34gig storage drives. Everything was running smoothly.
Just recently I learned that the 5gig's dedicated to running my operating system of choice, aren't enough to install all the software I wanted(I might be just a little greedy). The first logical step to correcting this problem was to move /etc to one of the storage drives and create a link were it was, but not being entirely sure how xUbuntu would take that, I thought I'd get an expert opinion.
The thread prefix is "all variants" because I have installed the desktops for kUbuntu and just plain Ubuntu on this machine(what I meant by being a little greedy).
Currently, my disk layout is as follows:
Code:
/boot /dev/sda1
/ /dev/sda5
windows /dev/sda3
/home /dev/sda4
/dev/sda2 is currently an extended partition.
I purchased a small SSD, and I'd like to move most of the root partition and my home directory over to it. Assuming the new drive is /dev/sdb, my desired layout is this:
Code:
/boot /dev/sda1
windows /dev/sda3
/data /dev/sda4
[code].....
What's the best way to go about this with minimal downtime? Second, what configuration files would I need to update?
I installed openSUSE 11.2 on an external HDD to test. I think it's brilliant, and want to move it to an internal HDD. What is the best way to do this? I don't want to lose all the programs / tweaks I've made to SUSE so far.
Coming from the Windows' world, it's as easy as taking an image of a partition and restoring it over a new HDD partition.
I have an 80 GB XFS / partition which is dying. Got some errors like this:
ata9: SError: { UnrecovData Dispar BadCRC Handshk }
It's not a problem to create another partition, I've got 2 500GB and 2 1TB disks, all EXT3. I've also 2 80 GB disks, 1 for / and 1 for /home. I will remove the 2 80 GB disks but I have a lot of stuff compiled myself. I use openSUSE 11.1. Is it possible to create a 80 GB EXT3 partition on each of the 500 GB hdd, 1 for / and 1 for /home and move the data to it? must it be done with the DD command or can I easily copy everything within a live-cd. The /boot and swap are already on one of the 500GB disks, and there is no bootrecord on the 80 GB disks.
I'm a plain user of Open SUSE 10.2 for more than six months now on a dual boot machine (Vista Ultimate) and I'm 80% mostly on Linux now but because of my job I still have to keep windows.
My 1TB HDD is full and I've got a new 1TB HDD to add to my system. My plan is to leave this HDD only for Vista and to use the new HDD for Open Suse, changing it to the 10.3 version and without to lose my data and my settings (keeping the Home directory).
Considering that I am a ignorant could someone give me a step by step plan as much as detailed possible, in order to succeed?
I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?
View 9 Replies View Relatedplans to upgrade my "production" desktop from Ubuntu 9.10 to 10.04 LTS. Based on what I have read and experienced with "upgrades" it is better to install the new version from scratch. That is what I plan to do. The next task is to install the various additional programs I wish to have. I can make a list of them and do the installs no problem.
So now I get to the question of my user account information. I have my current system built with the following file systems:
/ (for the OS)
/home (for my account)
/data (for all "data" including Firefox and Thunderbird profiles, OpenOffice.org documents and other data files)
Moving my "data" to the new OS will not be an issue. My user account information is stored in /home/ken. Can this be moved to the new OS? I would like to avoid having to redo gnome and program preferences and configurations, icons on the panel, saved passwords, ssh bookmarks and other stuff which Linux has stored in /home/ken.
I have created an Ubuntu virtual machine and tried a couple of approaches to transferring the files under /home/ken. The results were not promising. Is moving my profile a practical idea or should I just take a couple of hours and tweak everything on the new OS to my liking?
p.s. If I rebuild my profile are there any things I can do to make it "portable" in the future? For when I move to 12.04 LTS?
I have limited experience in terminal, but let me first explain what I am trying to do to see if there is some easier way to do it. Basically I want to change the skin in aMSN. I downloaded the new skin but am unable to unzip or move it without /root permissions. I don't know how to acquire this without being in terminal. So I figured there had to be some way to go into the terminal and use it to move the unzipped folder from the desktop to the aMSN skins folder.
View 3 Replies View RelatedI installed debian 8 on a 16 GB usb drive using this guide. I used a debian 8.2 64-bit image with mate. If I were to get a larger usb drive, would I be able to transfer everything from the 16GB drive to it? How?
View 1 Replies View RelatedI have Windows XP and OpenSuSE 11.1 installed on my laptop. I have recently removed the recovery partition provided by the laptop manufacturer (HP) to free up some space and ideally I would like to be able to add the free space to the existing Windows partition.The current partition set up is as follows:
Code:
Disk size 93Gb, P = Primary, L = Logical, U = Unallocated
P Windows XP 36Gb /dev/sda1 /windows
[code]...
A while back I ran into the situation of running out of space on /boot. When I last installed Suse I just went with the recommended LVM layout, which proposes a very small /boot partition. When you run out of space you are now faced with resizing the LVM, which Gparted unfortunately does not support.In Googling around I did not find a concise guide, so I collected the information I needed and and then wrote a guide on the steps I used to resolve this issue and it is available at Resizing Default LVM Partitions and Moving /boot - Mine the Harvest
I found using EVMS from a live CD to be quite simple and was able to create a new /boot partition and reconfigure grub to use it in very short order. I was quite impressed with how easy to use EVMS was and the options it provides. (I think that the default LVM layout the Suse installer proposes is overly conservative on the size of the /boot partition. Why not allocate a few hundred megs, especially considering the size of drives today? Perhaps Suse will soon move to using grub2 and eliminating /boot altogether, but for now the very small allocation of space can be a bit of a pitfall for users -- especially when they are not familiar with resizing LVMs and reconfiguring grub. Of course moving to grub2 also introduces its own complexities too.)
If you want a full run down as to WHY I want to do this, read here: webhostingtalk.com/showthread.php?t=899909Basically, my ISP could not get my server running stable on a simple raid 1 (or raid 5) so what it came down to was having them install my system on a single disk. I don't exactly like this, main reason being, if the system (or HDD) crashes, I'll end up with another several hours of down time..
View 1 Replies View RelatedFrom what I have understood, trying out different Linux distros is one of those things that a Linux user just needs to do now and again.
So what is the "best" way of keeping your home folder intact? Should I just copy the whole home folder to a separate storage space, install a new distro (I'm thinking going from Ubuntu to Suse) and then just past it in the newly installed distro? Or are there some other, more "refined" methods?
I thought one's home folder contains a lot of config and settings files, but they would surely just be applicable to the original distro!?
I know I can try out several distros via live CDs, which I have done, but when you've taken that next step and actually want to install another distro as your main Linux operating system.
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
I just installed the 11.4 version after using numerous previous versions. During this install the /usr directory was placed in a separate partition. How would I go about placing it in the partition with all the other running directories?
View 7 Replies View RelatedI am creating an openSUSE 11.2 Kiosk image. I have everything pretty much locked down but when I go into the gconf-editor under /apps/nautilius/preferences/show_desktop and uncheck the check box my mouse pointer changes to the circle icon that looks like it moves in a circle. Sortta like the busy or what it does during boot. Hard to describe by typing it out but if you make that change you'll see what I am talking about. I had this setup like this in previous versions of openSUSE so I am not sure what it is doing or what else I need to do to make the mouse pointer just the arrow like normally. I don't want the users to be able to right-click on the desktops to get a menu nor add icons so unchecking the show_desktop has served my needs.
View 3 Replies View RelatedI have a strange problem with grub. My grub boot image randomly changes sometimes into default opensuse and sometimes into penguin moving around.Is is a funny program?
View 9 Replies View RelatedAs my proficiency with Linux improves slowly, I've been trying to find the answers for myself, but in this situation I must admit I find myself rather stumped. I have a perfectly nicely working Fedora 12 install on an 80GB SATA drive, and when it hit an error and wouldn't boot last week (easily fixed with fsck from the initial command line) I panicked and ordered a new 250 GB drive. It got here and I might as well use it, I thought to myself, so I went about trying to figure out how to move my install without having to reset all of my settings, programs and so on. I didn't want to mess with dd because I'm not so so clear on resizing my partitions once the copy is done (if someone thinks this is a better idea I'm open to suggestions.) After some poking around I found this set of instructions which I attempted to follow to the letter, but hit some snags. I understand this thread I am referring to may be a bit outdated, which is why (I assume) I hit a bump here
Code:
# mount /dev/hdy1 /boot
mount returns an error demanding I specify the file system type. At a loss, I barreled on until
Code:
[Code]...
To summarize, I partitioned and mounted my new drive using fdfisk and the instructions provided above, then used rsync to copy over all of the files, so as far as I know the new drive is ready to go, just not yet bootable. Opening the Grub.conf file in Kwrite (as root) returns a blank page. What do I do now?
As a side note, you can see that I am not too squeamish about the terminal, so I would prefer to find a "command line only" solution to this relatively simple (?) procedure.
I recently installed 11.3 from the network install CD and I wanted to configure GRUB to have a boot password. I went into the necessary options and enabled the password and saved. I went back in to confirm it stuck, and the password option was unchecked and the password was blanked.I re-entered the information and just carried on. The installation summary didn't mention any password being applied to GRUB, but I just kept on going. Sure enough, there is no password on boot with GRUB now.I tried this over multiple installs in the past couple days, as well as with the 11.2 network install CD, and on no install was the password option honoured
View 4 Replies View RelatedDid you play too much with compiz and after-a-while you realize that certain functions are not working anymore?
Well, just follow the steps below:
Quote:
gconftool-2 --recursive-unset /apps/compiz
Then,
Quote:
Restart your PC / lappy
[URL]
i have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed.
2) change file permission settings to force all documents to inherit parent document settings
I have no idea what to do to copy settings for programs, etc. to a new install of Ubuntu so that I don't have to do it all over again. When 10.10 releases, I would like to upgrade with a fresh install because upgrades sometimes bug out. Which folders do I copy/What is the best method of doing this?
View 9 Replies View Related