plans to upgrade my "production" desktop from Ubuntu 9.10 to 10.04 LTS. Based on what I have read and experienced with "upgrades" it is better to install the new version from scratch. That is what I plan to do. The next task is to install the various additional programs I wish to have. I can make a list of them and do the installs no problem.
So now I get to the question of my user account information. I have my current system built with the following file systems:
/ (for the OS)
/home (for my account)
/data (for all "data" including Firefox and Thunderbird profiles, OpenOffice.org documents and other data files)
Moving my "data" to the new OS will not be an issue. My user account information is stored in /home/ken. Can this be moved to the new OS? I would like to avoid having to redo gnome and program preferences and configurations, icons on the panel, saved passwords, ssh bookmarks and other stuff which Linux has stored in /home/ken.
I have created an Ubuntu virtual machine and tried a couple of approaches to transferring the files under /home/ken. The results were not promising. Is moving my profile a practical idea or should I just take a couple of hours and tweak everything on the new OS to my liking?
p.s. If I rebuild my profile are there any things I can do to make it "portable" in the future? For when I move to 12.04 LTS?
I'm about to sell an old computer and I want to put a fresh copy of Ubuntu on it for the buyer to use. I don't want to configure a user name and password--I want to leave that process to the buyer, similar to the experience of (for example) buying a new Apple computer, where it asks for a user name and password on first boot after the OS is already installed.
I am on ubuntu 10.10 and want to install boxee to use as a media player for me and my roomates. My ubuntu account is password protected and I would like to create another user that when you log on (with out a password) it automatically runs boxee, and nothing else.
openSuse v11.1 Linux 2.6.27.39-0.2-default x86_64 VirtualBox v3.1.0
One user account completely ignores all keyboard input. No other account demonstrates this bizarre behavior. The faulty account has had occasional keyboard difficulty but it has always been related to the Virtual Machines (VirtualBox); the hosting account always functioned correctly.
Then the ban on keyboard input. Poof! "Keyboard? What keyboard? I don't see no stinking keyboard!"
It is not the physical keyboard. Three different hardware exhibit the same fault. It is not the motherboard; two mb's show the same fault. It is only that one account. And I even took the Windows route of re-installing the OS (what a waste of time that was).
If something changed, I am not aware of it (although something must have).
My install of 11.4 has been running perfectly for for several weeks now. But- (always a but) today it started acting up. I cannot log in to any user account including Root after logging out. After a cold boot I can log in again anywhere but after logging out I have to reboot again then I can get back in to any account once. After logging out any attempted log in causes the splash screen to blank for a few seconds and then it comes back with the previous successful user name log in but typing in the password blanks the screen a few seconds again. Clicking on a user account also blanks the screen a few seconds and then it again comes back with the previous log in users name.
I cannot log into the normal user account after shutting down the OPENSUSE 11.1 system by cutting off electricity. The system always returns to the login page which requires to choose account id and enter passwd even when I type in correct normal user id and passwd. The root account can be used.
I have a problem with the Google search box top right corner in Konqueror, when entering search I recieve an error page "Unsupported Protocol" Google asks for ioslave or kioslave. Also when highlighting text on a page and right clicking with the mouse no search option is given. I created a new user and all works as it should for the new user. What is wrong with my user account? I have reset default values in Konqueror setup.
I have two Fedora 10 boxes. Both have a user account, Andrew. I use this account all the time.
Now when I put my USB drive (ext3-filesystem) in box I, create a file in it. It works. But when I attach it to box II and try to access the files, it gives me error - Permission denied. I have to use
Quote:
sudo chown -R Andrew
Only then I am able to access the files in it.
When I attach my drive to box I again, it also gives me error - Permission denied. So in both boxes, I have to use
Quote:
sudo chown -R Andrew
first. Otherwise I get Permission denied message.
This means Andrew on both systems is different. How can I make Andrew account on both systems same? So that I can access files on my usb drive without running chown all the time.
two days before I have formatted my / partition and everything seems to working fine. Next day I came to office and try to login as root through ssh. I am getting the error: [sunheer@svn ~]$ ssh root@192.10.10.23
I thought the password were wrong and I rebooted the server in to run level 1 and reset the password and it started to work. Again on next day the account got same problem.his started to happen after formatting the / partition
I want to know how to change a password to an user account. Can someone give me the syntax on how to do this? I was using usermod but it's not working (usermod -p 123456 user1). Is there other way beside usermod? I am using RHEL5.
I did an adduser to create a new account, but i forgot to add a description to the account, so it just looks like this when i look at the passwd file. how can i go back and add one? all my other accounts have descriptions after the two numbers.
I just installed Slackware 32bit 13.1. I created a new user with everything default. When I startup and logoff, I hear the startup and logoff sound. But other than that I have no sound in my user account I made. So I did some googling and found this command
Code:
So I logged in the terminal as root and gave it a try. Logged out then back in the user. And I still have no audio.
I never considered I would want to remote access my laptop, or that I would be able to figure out how (I know....). In any case, my (only) username and password are not all that complicated - just there for deterence more than anything else (I have a barely functioning battery and a FDE hard drive, so if you're going to unplug and transport this baby, it'll shut off; my hard drive PW is solid).
In any case, I wanted to create another account that I could use to log into with SSH to be able to access files. I've started by disabling SSH login to my current user account (DenyUsers myusername). I know I could add a new user to my system with its own home directory and all, but I want it as least 'present' or invasive as possible. So in sum, is there a way to create an SSH only user, and if so, how?
I thought I would check here to get some pointers, to be sure I don't mess up my system!
In SolarisQuote:#usermod -e 'September 18, 2010' usernameIs this correct format to set expire the user account after 180 days?Where is this information update?
Recently I have renovated an old computer which once belonged to my dad (the old HDD crashed, and I just bought a new one to replace it). My parents want me to fix this computer for my 5-year-old sister to use. I decided to use Linux Mint as the OS because everything (flash, mp3, etc.) is already configured.
How do I create a user account in Linux Mint with limited access for my sister, so that it won't mess up the entire system?
All she does is surf the web, so I'm just worried that she might accidentally mess up a system setting that I eventually will have to fix it.
I will be setting up a computer for people who have very little experience using computers and I want to limit their ability to break things. I'm thinking Linux is the way to go but I don't know what distribution to use. I don't know anything about their hardware other than it is an old laptop. I don't have a lot of experience with Linux, but I would think that without sudo there is not a lot of things you can break.
What would be a good Linux dist that has everything out of the box? (flash, vnc, office, etc) How should I set up the user account to avoid giving them too much power, yet still allowing the computer to be useable for daily tasks? (Will they be able to update software?) I also want to be able to control the machine remotely since I won't have physical access after I set it up, so I am looking into ssh, vnc, (or a better alternative?).
What is the user account number when you create a root user account for the system during the installation of any linux distribution? I'm not sure if its 0, 1, 10, or 100..
We are using ubuntu 10.04 desktop version.ls > /dev/lp0 permission denied in user account we need user can access lp0 /usblp0. Our printing module is lp0 writing technology example dir >prn.
When I reinstall my distro (MEPIS, for the last 2.5 years), making my new user account preserve all the old account's settings has always been a difficult and very messy process, especially if I have installed a new copy on another partition. (I'm doing that soon, so I have this copy as a backup until I have everything the way I want it on the new copy.) Most of my stuff gets saved, but not everything. The biggest problem is that, even if I select "preserve data in /home" in the MEPIS installer, my keyboard shortcuts become unusable (not completely erased) under odd circumstances. They're still listed in file /home/josh/kde/share/config/khotkeysrc, but they still can't be used, and I have to open hhotkeysrc and manually delete them and then reenter them in the menu editor (the K menu, by the way, gets completely overwritten).
I can't just overwrite the entire new user account with the old one; I've tried, and something goes wrong so that the new account can't be opened (probably because some important files are inaccessible--I can't tell which ones they become inaccessible).Anyway, is there a program that can preserve all the user account settings neatly for a new installation of the distro? I am supposing there is a program or at least a method, because I never hear others complaining about this problem. I probably don't know something I should know.
I need to create a special linux user account that has a very limited set of permissions on the system. Essentially to have read-only permissions for his home dir (and sub dirs) and nothing else - i.e. this user has no write or execute permissions and should not be able to read/access other user dirs or indeed anything outside of his home directory, irrespective of rwx permissions.
I have recently installed linux mint 10 Julia on my wife's Dell. I installed off CD from linux freedom website with the ftp download. My wife wanted her own account so I went to admin/users and groups and created her account. Or so I thought. When I tried to switch users (with the boot CD in and out of the drive) I got the follwing error:
1) "The panel encountered a problem while loading "OAFIID:GNOME_mintMenu" do you want to delete applet from your configuration?"
2) "The panel encountered a problem while loading "OAFIID:GNOME_IndicatorApplet" Do you want to delete the applet from your configuration?" Both of these had an orange word bubble with an exclamation point in it.
3) "Nautilus could not create the following required folders; :/home?tina?Disktop,/home/tina/.nautilus. Before running Nautilus, please create these folders or set permissions such that Nautilus can create them." This came in a red word bubble with an "x" in it. One last thing. When I installed linux mint 10 on my ancient compac (it has a pent 4 processor and had win 2K on it) all I had to do was plug in a usb wireless card and I was online. My wife's Dell has a wireless card built in and I can't find it in mint 10. How do I set up the wireless. Sorry for the "2 fer" but I'm pressed for time and have to get to work. I'm a copier tech/electrician and I'm good with the hardware but with the software, not so much. I'm sticking with linux no matter what the learning curve because my Mom gave me the compac evo thinking it was useless and I've brought it back to life with linux.
I created new desktop account for my wife but it is not loading and I get an error message on log in that ICE.authority failed to load and than nautilus give an error message that nautilus unable to create folders in home directory. And then I get a blank desktop without any panels.
I am a user of a cluster. I don't want root to see/copy files from my user account(obviously). Is that possible to limit the access of root to users account?
I am running Debian Lenny with the default Gnome desktop. When I set up a new user the sound is not available. It says the device in not installed. I have used the Gnome system menu as follows.System, Administration, Users and Groups, then used the add user button and entered the appropriate info. I then went and clicked on the properties button and then the User Privileges section and checked off the "use audio devices" button. Still no sound. When I go to System, Preferences, Sound, Devices, and do the sound tests I get report that device is not installed.
When I am logged in to the user (jon) that I set up when doing the D.Lenny install, the sound on all various media play back works fine.There is one with 1 exception when loged in to this user(jon). I can not get any sound from the system sounds like select check box = toggle .wav, chose menu item = beep, etc. It would be realy nice to know how to repair or configure tis issue as well.under system info, pci devices it lists as follows Multimedia audio controller, Intel Corp 82801FB/FBM/FR/FW/FRW. Mother board is a ECS 915P-A2 and I guess about 2007 or so vintage. 1 G mem installed and a P-4 2.66 chip. It has the sound built in to it. It works fine on WinXP.
I just created new user account, but the new user is able to access all the directories structure (including other's home directories).I'd like to limit the user to access ONLY his home directory (and nothing "above"). How do I do this?
I would like to create a script for consistent user account creation and maintenance.
Current situation: Server A user1:11111:15:USER USER:... user2:22222:15:USER USER:... Server B user1:33333:15:USER USER:..
[Code]...
Now i would like to make uid consistent on all servers for each user. Next time if user1 needs to be created on Server D it should automatically pick the particular uid. Janak
creating template (phpldapadmin 1.2.0.5). I create new template where im creating User Account (possixAccount) but i need to create Generic: Ldap Alias that will be created in other ou than account and i need both in one template.
