OpenSUSE Install :: Moving XFS To New EXT3 Partition
Feb 5, 2009
I have an 80 GB XFS / partition which is dying. Got some errors like this:
ata9: SError: { UnrecovData Dispar BadCRC Handshk }
It's not a problem to create another partition, I've got 2 500GB and 2 1TB disks, all EXT3. I've also 2 80 GB disks, 1 for / and 1 for /home. I will remove the 2 80 GB disks but I have a lot of stuff compiled myself. I use openSUSE 11.1. Is it possible to create a 80 GB EXT3 partition on each of the 500 GB hdd, 1 for / and 1 for /home and move the data to it? must it be done with the DD command or can I easily copy everything within a live-cd. The /boot and swap are already on one of the 500GB disks, and there is no bootrecord on the 80 GB disks.
View 9 Replies
ADVERTISEMENT
Jan 1, 2010
I installed openSUSE 11.2 on an external HDD to test. I think it's brilliant, and want to move it to an internal HDD. What is the best way to do this? I don't want to lose all the programs / tweaks I've made to SUSE so far.
Coming from the Windows' world, it's as easy as taking an image of a partition and restoring it over a new HDD partition.
View 5 Replies
View Related
Jul 24, 2011
I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?
View 9 Replies
View Related
Jan 30, 2010
A while back I ran into the situation of running out of space on /boot. When I last installed Suse I just went with the recommended LVM layout, which proposes a very small /boot partition. When you run out of space you are now faced with resizing the LVM, which Gparted unfortunately does not support.In Googling around I did not find a concise guide, so I collected the information I needed and and then wrote a guide on the steps I used to resolve this issue and it is available at Resizing Default LVM Partitions and Moving /boot - Mine the Harvest
I found using EVMS from a live CD to be quite simple and was able to create a new /boot partition and reconfigure grub to use it in very short order. I was quite impressed with how easy to use EVMS was and the options it provides. (I think that the default LVM layout the Suse installer proposes is overly conservative on the size of the /boot partition. Why not allocate a few hundred megs, especially considering the size of drives today? Perhaps Suse will soon move to using grub2 and eliminating /boot altogether, but for now the very small allocation of space can be a bit of a pitfall for users -- especially when they are not familiar with resizing LVMs and reconfiguring grub. Of course moving to grub2 also introduces its own complexities too.)
View 2 Replies
View Related
Mar 16, 2011
I just installed the 11.4 version after using numerous previous versions. During this install the /usr directory was placed in a separate partition. How would I go about placing it in the partition with all the other running directories?
View 7 Replies
View Related
Jun 12, 2011
i am going to be upgrading to a ssd and would like to move /var and /tmp to a separate partition (it can be separate but preferably the same) how would i extract /var and /tmp to a different partition (need fstab lines and permission settings) when i get another stick of ram i will make /tmp into a ram disk here is my partition layout
View 3 Replies
View Related
Aug 31, 2010
I have a drive with ext3 that was my old /home drive.When I moved to 9.04 I went with ext4 and just linked to my old home drive.My old ext3 drive is becoming unstable so I want to back it up.I have a 500gb ata drive (unfortunately not a sata drive) thatto wipe and put 10.04 on. I want to move my data from this backup driveIm going to back up to, to the new 10.04 until I get another hd as abackup drive.My question is, I know there is some issue between ext3 and 4 and I dontwant to get into a bind. What would be the best format for moving
View 3 Replies
View Related
Apr 8, 2010
What must be done to mount an ext3 partition that's on another computer which is connected via utp crossover cable? I can't seem to figure this one out, though I've read somewhere that it can be done, and I'd like to know how.
View 2 Replies
View Related
Sep 25, 2009
I'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
View 1 Replies
View Related
Sep 26, 2010
I have formatted a second internal drive as ext3. It worked fine until I copied (rsynch) my /home to the new drive. Now when I try to delete anything I'm forced to delete immediately or skip the deletion. I also tried moving the /usr/local directory to the second drive and it works fine, it doesn't break the Trash. I tried moving /home back to the root drive and the problem is gone. The second drive again works properly. I can reproduce this. The problem only occurs when I move the /home directory to the new drive.
# / was on /dev/sda1 during installation
UUID=89a54f23-98ef-45d2-bef9-47d51992fd01
/ ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=fb609b91-7322-4903-9309-2f0d3a6b87d4
none swap sw 0 0
# My shared volume /dev/sdb1 (show it on desktop)
UUID=a726a583-03e5-47c6-9618-ddbfcdd4c1d6
/media/data ext3 defaults, users, exec0 0
# Moving /usr/local
/media/data/Ubuntu/usr/local
/usr/local bind defaults, bind, users, exec 0 0
# Moving /home
/media/data/Ubuntu/home
/home bind defaults, bind, users, exec 0 0
View 3 Replies
View Related
Jun 17, 2010
My co-worker install CentOS with /var (ext3) is 1TB:
Code:
I do the following tasks to move sdb1 to VolGroup00:
After that I moved /var back to / folder and reboot but the system hangs at "Starting system logger". Uninstall and re-install sysklogd package don't make any change. What I don't understand is I can start syslogd from command line:
Code:
Or run the init script in debug mode:
Code:
How can I debug this case?
View 3 Replies
View Related
Dec 11, 2009
I usually repartition a disk by backing up, deleting the partitions, formatting them and repartition. I just did a 200 gig backup (so i am safe) and i want to join 2 (ext3) partition together, sdb1 (data4) and sdb5 (data5) into one big partition. Is there a way to do it without scraping the data in sdb5 (data5). It would save me from rewriting the data back to that new partition (200 gig is time consuming).
View 1 Replies
View Related
Feb 23, 2011
I recently got myself a seagate 2 TB external usb harddrive.
I formatted it with ext3 and the fstab looks thus:
Code:
(the problematic device is in red) it worked well for a couple of weeks, but then, one day, after i rebooted, my machine can t find the device:
Code:
I ve rebooted a couple of times, but to no avail.
View 4 Replies
View Related
Nov 25, 2010
I was having trouble with an old lvm partition so I pulled all the data off and now want to re-partition it as an ordinary ext3 partition.
But gparted offers only Logical Partition for that partition. How do I convert that partition to a Primary or Extended partition - and which do I want?
View 1 Replies
View Related
Dec 14, 2009
I've been using Kubuntu for several years now (and Fedora and RedHat before that) and decided to give openSuse a try. Looking for more love for the KDE version of my distro basically. Anyway, the install was pretty rough.
My first go was to try and resize my kubuntu partition (ext3) during the install. The installer froze at 1%. After a boot to kubuntu which ran fsck, it seems no damage was done. Without letting it run fsck, it could not mount though, so it was not without risk.
I tried to resize it myself after reading some forum entries here and came to the conclusion that resizing is just not worth the effort and tanked my dell recovery partition (when was I going to use that?) instead. If you do have to resize a partition, ext3 at least, I would recommend that you try another approach or at least resize it outside of the installer. Once I let it just reformat an existing partition, the installer managed to install to the hd.
I had another freeze after leaving the installer for some time as it was waiting for me to enter my host name. I rebooted and it figured out right where it should be though.
View 7 Replies
View Related
Dec 15, 2009
I have a Westel 1 TB external hard drive and when attempting to partition it, the partitioner never finishes refreshing the device. I've tried gparted live, opensuse, & ubuntu; and none of them finish refreshing the device.
Another issue is, I have 200 gig of music & movies that can't be wiped out because I got no room elsewhere to move them to. I would like to set a partition of 750 gig for the ext 3 and leave the rest for ntfs.
View 9 Replies
View Related
Aug 30, 2010
Recently I was working on something on my windows partition (on the same HD as opensuse), and all the sudden windows stopped working and I got some bad sectors on my HD.
Now, my opensuse installation is on the same HD as windows, but I need to get rid of that HD soon because it's starting to get worse (and I think opensuse is randomly crashing because of it).
Is there any way to transfer my opensuse parititon/os to another hard drive?
View 9 Replies
View Related
Jan 4, 2010
I have two ext3 partitions within an encrypted lvm2 volume. when i start up my system it says that there are 0.3% non contiguous blocks.
This is my steup:
When i want to repair with repair system from dvd it tells me that the repair and check operation for encrypted LVM devices is not supported. so how can i fix my filesystem?
View 4 Replies
View Related
Dec 29, 2010
I'm a plain user of Open SUSE 10.2 for more than six months now on a dual boot machine (Vista Ultimate) and I'm 80% mostly on Linux now but because of my job I still have to keep windows.
My 1TB HDD is full and I've got a new 1TB HDD to add to my system. My plan is to leave this HDD only for Vista and to use the new HDD for Open Suse, changing it to the 10.3 version and without to lose my data and my settings (keeping the Home directory).
Considering that I am a ignorant could someone give me a step by step plan as much as detailed possible, in order to succeed?
View 9 Replies
View Related
Dec 29, 2009
I have Windows XP and OpenSuSE 11.1 installed on my laptop. I have recently removed the recovery partition provided by the laptop manufacturer (HP) to free up some space and ideally I would like to be able to add the free space to the existing Windows partition.The current partition set up is as follows:
Code:
Disk size 93Gb, P = Primary, L = Logical, U = Unallocated
P Windows XP 36Gb /dev/sda1 /windows
[code]...
View 1 Replies
View Related
Jan 19, 2010
During the file system check of an ext3 partition at boot I get the following output:
The super-block could not be read or does not describe a correct ext2 filesystem. If the device is still valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate super-block:
I'm then forced to login in as root and given the following prompt:
I'm reluctant to do as advised by the output and run e2fsck -b because it is not an ext2 filesystem.
Although I can still enter runlevel 5, it doesn't seem to recognise mouse and keyboard input in KDE so my system is effectively redundant at the mo. For this reason any short term workarounds are welcome, but a fix is needed. This problem is part of a longer saga to do with recovering a Windows Vista installation which started failing to boot. I have used both Vista and SUSE tools to try and recover my bootloader to no avail, and this has been the result. If more detail about this is needed please ask and I can explain what I have done.
View 9 Replies
View Related
Jun 29, 2010
From what I have understood, trying out different Linux distros is one of those things that a Linux user just needs to do now and again.
So what is the "best" way of keeping your home folder intact? Should I just copy the whole home folder to a separate storage space, install a new distro (I'm thinking going from Ubuntu to Suse) and then just past it in the newly installed distro? Or are there some other, more "refined" methods?
I thought one's home folder contains a lot of config and settings files, but they would surely just be applicable to the original distro!?
I know I can try out several distros via live CDs, which I have done, but when you've taken that next step and actually want to install another distro as your main Linux operating system.
View 7 Replies
View Related
Aug 26, 2010
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
View 4 Replies
View Related
Mar 10, 2010
I'm using opensuse 11.1,syetm specification is following
CPU entium 4 2.93GHz
motherboard:asus
Hardisk:40 gb maxtor
Ram:1 GB
my system getting hang periodically after some time and the kernal showing the following error message
[Code]...
View 7 Replies
View Related
Nov 28, 2009
I am creating an openSUSE 11.2 Kiosk image. I have everything pretty much locked down but when I go into the gconf-editor under /apps/nautilius/preferences/show_desktop and uncheck the check box my mouse pointer changes to the circle icon that looks like it moves in a circle. Sortta like the busy or what it does during boot. Hard to describe by typing it out but if you make that change you'll see what I am talking about. I had this setup like this in previous versions of openSUSE so I am not sure what it is doing or what else I need to do to make the mouse pointer just the arrow like normally. I don't want the users to be able to right-click on the desktops to get a menu nor add icons so unchecking the show_desktop has served my needs.
View 3 Replies
View Related
Dec 4, 2010
I have a strange problem with grub. My grub boot image randomly changes sometimes into default opensuse and sometimes into penguin moving around.Is is a funny program?
View 9 Replies
View Related
Feb 9, 2010
I have windows 7 and fedora 12 installed into my laptop.I just want to access linux ext3 partition in windows 7 as we can access windows ntfs as well as fat partition in linux
View 9 Replies
View Related
Jan 20, 2010
I just made a new storage partition and formatted it as Ext3. Now, this particular partition is shown and can be read at the terminal "fdisk -l". However, unlike in my Mint 7 partition, it does not show in my Fedora 10.
Code: [jun@localhost ~]$ sudo fdisk -l
[sudo] password for jun:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc5e3f820
[Code]....
This partition can also shows be seen in gparted in Fedora. However, even in the "Places" tab, it does not show.
View 9 Replies
View Related
Apr 15, 2010
I have a created an ext3 partition and when i tried to set is hidden flag, there seems no effect. how to set the hidden flag of an ext3 partition?
View 1 Replies
View Related
Mar 26, 2010
I created primary partition for Ubuntu. And for some reason that partition starts showing up in Windows XP as RAW. The partition should NOT be visible. In explorer. I tried with Ext4, Ext2 same thing, ext partitions should not be visible in windows.
View 9 Replies
View Related
