Fedora :: 14: Boot Time Error Opening ATTR No Such File Or Directory?
Jan 22, 2011
After boot, Fedora 14 gives the following message, on my HP Pavilion dv2701tx laptop.
Starting udev: udevd-work[454]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory
I suspect it has something to do with my Authentec AES2501 fingerprint reader. I need it to work for my project, but it's not working, even though it works fine in the Windows 7 installed on my system.
View 3 Replies
ADVERTISEMENT
Jan 31, 2010
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
View 6 Replies
View Related
Mar 4, 2010
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
View 4 Replies
View Related
Feb 19, 2011
Okay, so on occasion when I boot into ubuntu I get this error
[mount: mounting /dev /root/dev failed: no such file or directory]
[mount: mounting /dev /root/sys failed: no such file or directory]
[mount: mounting /dev /root/proc failed: no such file or directory]
[code]...
I get the error when I open any of the kernel versions or any recovery mode. Ubuntu 10.10 Desktop is the only OS installed on the computer, which is a Lenovo S10-3. I can eventually get it to go away, sometimes by repeatedly unplugging it and plugging it back in, and sometimes I will boot into GParted, do nothing, then restart and it will work.I have found some solutions online, but all of them involve the error happening as a result of dual booting with Windows.I have made no major system changes recently, so I can't see anything like that being the problem.
View 3 Replies
View Related
Jun 8, 2010
I am trying to install the program qtstalker I have run ./configure successfully But i get the following errors when i run make
Code:
cd lib && make -f Makefile
make[1]: Entering directory `/home/martin/Apps/qtstalker-0.36/lib'
g++ -c -pipe -ffast-math -Wall -W -g -D_REENTRANT -fPIC -DQT_NO_COMPAT -DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_NO_DEBUG -I/usr/lib64/qt-3.3
[code]....
View 2 Replies
View Related
Dec 23, 2010
my problem is inkscape-0.48.0-1.fc14.3.src.rpm in fedora 14 64 bittry rebuild --source inkscape-0.48.0-1.fc14.3.src.rpm and this my error:I think something wrong pkgconfig .
attributes.cpp:20:32: fatal error: glib.h: No such file or directory
compilation terminated.
arc-context.cpp:21:28: fatal error: gdk/gdkkeysyms.h: No such file or directory
[code]....
View 6 Replies
View Related
Nov 28, 2009
I finally got the repos enabled and installed skype, but when I run skype I get this error
bash: /usr/bin/skype: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
View 3 Replies
View Related
Dec 18, 2010
I am using fedora 14 and after i have installed RealPlayer11GOLD.rpm , i didnot work and it give me the following error
./realplay: /opt/real/RealPlayer/realplay.bin: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
View 14 Replies
View Related
Apr 29, 2011
What is the magic that needs to be done to be able to record in audacity?
- Fedora 15 x86_64 2.6.35.12-88.fc14.x86_64
- SoundBlaster X-Fi card.
-I have added rpmfusion to yum repos.
When I start audacity the following is printed to the concole:
Code:
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
View 5 Replies
View Related
Dec 19, 2010
You may know the Humble Indie Pack 2, which is a set of crossplatform indie video games. There's one game in the bundle that doesn't offer a 64bit build and therefore it fails to load. It's called Braid and that's what you get when you try to run it: $ ./braid ./braid: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
Of course the 64bit libs for OpenGL and the propitiatory nvidia drivers are installed, but the game asks for the 32bit ones, at least to my understanding. I do know that why can install 32bit libraries on a 64 bit linux system (we do that for the sake of crappy Adobe Flash), but I don't know where to find these libs (searching the repo with keywords like .i586 or ia32 led me nowhere).
View 2 Replies
View Related
Apr 4, 2011
I have been comileing that kinect hack with the 3d video capture. i did everything, calibrated cameras and everything else but when i try to open the final program (KinectViewer) i get back this error: Caught exception Misc::File: Error opening file CameraCalibrationMatrices-B00363201643043B.dat in mode rb. From what ive gathered off the web it is not opening it because its in binaly mode or something to that affect. any tips to fix it? is there a way to change what mode im in?
View 2 Replies
View Related
Jan 6, 2010
I am trying to launch gst in frrescale IMX51 board. when i try to launch that i am getting the following error as [code]error in opeing firmware binary file pu bin file to /usr/lib folder or export VPU_FW_PATH env
ERROR: pipeline doesn't want to pause.setting pipeline to NULL FREEING pipeline ...[/code[
but i already exported the VPU_FW_PATH and its there in /usr/lib/ also. But still i am getting the same thing.
View 1 Replies
View Related
Oct 13, 2010
since the recent upgrade to Maverik every time I boot this error message appear on the top of the screen: "modprobe: Fatal: Could not load /lib/modules/2.6.35-22-generic/modules.dep: no such file or directory" fter that plymouth starts without any graphics and the first visible object is the login interface (GDM)
View 1 Replies
View Related
Dec 1, 2010
I wanted to give kupfer a try, though I had to build it from source as it doesn't appear to be in the repos. The building seemingly went fine and installed, but I get these error(s) when I try to run the program:
Code:
$ kupfer
Kupfer: A free software (GPLv3+) launcher
Copyright � 2007--2010 Ulrik Sverdrup with others
http://kaizer.se/wiki/kupfer/
Error [kupfer.plugin.websearch] OpenSearchSource: [Errno 2] No such file or directory: '/home/snakepc/.mozilla/firefox/z6orlu2l.default/searchplugins'
[Code]...
View 1 Replies
View Related
Feb 2, 2010
I am attempting to install Xemacs-21.4.22 on Centos 5.4 and get the following error message when I attempt to... make install
..........
xlwmenu.c:39:28: error: X11/bitmaps/gray: No such file or directory
xlwmenu.c: In function 'XlwMenuInitialize':
xlwmenu.c:3015: error: 'gray_bits' undeclared (first use in this function)
xlwmenu.c:3015: error: (Each undeclared identifier is reported only once
xlwmenu.c:3015: error: for each function it appears in.)
xlwmenu.c:3016: error: 'gray_width' undeclared (first use in this function)
xlwmenu.c:3016: error: 'gray_height' undeclared (first use in this function)
make[1]: *** [xlwmenu.o] Error 1
I understand that there are some X11 bitmaps not included in Centos 5.4 however I have no idea how to install them.
View 6 Replies
View Related
Jun 21, 2011
I get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
View 7 Replies
View Related
May 1, 2010
Over the last few months there have been multiple updates and I am getting a list of things that no longer work or that cause my system to fail. I can no longer open a pdf in firefox. It says there is no application assigned to the task. I ran evince and tried to open a pdf file and received a "floating point" error message on the terminal screen I was working from.
View 1 Replies
View Related
Sep 2, 2010
I have install samba server.Now i am trying to shift data from linux machine to windows machine.it gives following error. NT_STATUS_ACCESS_DENIED opening remote file history.txt firewall and iptables are also disabled.
View 1 Replies
View Related
Oct 21, 2009
I have a problem partitioning an Hard Disk Drive on a server, and I hope someone can help me with this. Here is the system configuration: Operating System Linux localhost.localdomain 2.6.30.8-64.fc11.x86_64 #1 SMP Fri Sep 25 04:43:32 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Hardware: RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)
The system mounts one hard disk (120 Gb) with the OS, and four 1.5Tb Hard Disks mounted on RAID 10 for a total of ~3 Tb I need to create several partitions on this RAID drive, but I have some trouble doing it. I need a total of 10 partitions of different sizes:
[Code]...
View 3 Replies
View Related
Dec 22, 2010
I have installed CUDA-BLASTP on C2050.It is giving me an Error:"Bad address Error opening matrix file (null) for reading" while i am running with following query file and dataset:
./CUDA-BLASTP -i ./data/raimondii_contigs.fasta -d ./data/DB_sorted.fasta
and i am using BLOSUM62 as a matrix file which is already present in package.
And getting the error:"Error happened when the number of GPUs is 0" while i am running CUDABLASTP with a part of dataset taking as a query file and dataset is same. above mentioned error is comming from file "CUDA_Blast.cu" included in package.
else
{
printf("Error happened when the number of GPUs is %d
", localGPU_N);
exit(0);
}
View 2 Replies
View Related
Nov 13, 2010
Recently I migrated from Ubuntu to Debian, first thing i wanted to do was to give myself sudo permissions and lock the roir account. By default sudo group don't have permissions to do this on debian, so i wanted to edit sudoers file by typing visudo. But i keep getting this
error: Error opening terminal: vanilla How can i solve this.
View 1 Replies
View Related
Jun 26, 2010
Create a copy of the file above and call it commands.sorted. Use the vi command to manually sort this file. I.e. use yy to copy a line, P or p to paste a line, and dd delete a line. Order the commands with the two lines starting with double quotes first. Then list the rest of the command in alphabetical order.
Anyone have any ideas what he's talking about? Can I copy a file and rename it at the same time while copying it to the same exact directory again? Now sure what the two lines things means either. I have an email out to him but it usually takes a long time for him to answer me. I got alot of work to do so everytime I get hung up it kills me.
View 2 Replies
View Related
Sep 25, 2009
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies
View Related
Oct 25, 2010
Whenever I open the Terminal using the shortcut, I get the following error.
Code:
I understand that it is a misspelt word (report). But I didn't type that command in the past. And why it is coming up EVERY time I open the Terminal.
View 2 Replies
View Related
Apr 14, 2011
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
View 9 Replies
View Related
Jun 10, 2010
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
View 5 Replies
View Related
May 22, 2011
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
View 3 Replies
View Related
Jun 9, 2009
I am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
View 7 Replies
View Related
Jan 6, 2010
my squid show like this when i try create swap directory
[Code]....
View 2 Replies
View Related
Nov 12, 2010
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
View 2 Replies
View Related