Ubuntu Multimedia :: Main:2273: FATAL: Failed To Open '/dev/dvb/adapter0/frontend0': 2 No Such File Or Directory
Jun 2, 2010
My USB stick is this one: [URL] I can't get it to scan my frequencies. PC finds the stick (lsusb):
Code:
Bus 002 Device 005: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick When I plug it in, dmesg shows this:
Code:
[ 5680.696043] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 5680.834917] usb 2-2: configuration #1 chosen from 1 choice
[ 5680.849872] af9015: tuner id:179 not supported, please report!
[ 5680.852951] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[code]....
But if the directory is created, then after the same command I have
Code:
scanning /usr/share/dvb/dvb-t/lv-Riga
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device
I found on the internet a firmware for my USB HDTV DVB-T stick named "dvb-usb-af9015.fw" and copied it into /lib/firmware/ but I have not seen any difference with that.
View 1 Replies
ADVERTISEMENT
Oct 29, 2010
I am trying to install a program called airfart and when I run make after cd'ing to the appropriate file i get this
Code:
g++ -g `pkg-config gtk+-2.0 --cflags` -o src/main.o -c src/main.cpp
Package gtk+-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk+-2.0.pc'
[code]....
View 9 Replies
View Related
Feb 3, 2011
I have an Acer 9410Z laptop that I believe is running the Maverick Meerkat version of Ubuntu Studio. I just did an upgrade using Synaptic. I get to GRUB, but When I try to boot 2.6.35-22 (or the recovery mode or a real time kernel I had installed )I get the error:
INIT: Failed to spawn ureadahead main process. No such file or directory I then get the Ubuntu Studio splash screen for 2 seconds but then instead of a normal boot I end up in the terminal.
View 3 Replies
View Related
May 27, 2010
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
View 3 Replies
View Related
Apr 6, 2011
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory
init: Failed to spawn rcS main process: unable to execute: No such file or directory
init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
PS: My Fedora 14 installation is working fine.
View 1 Replies
View Related
Jan 15, 2010
I was attempting the pear installation as per the instructions given here:url
I think i got the installation correct.
Then i tried this program
<?php
require_once 'System/Folders.php';
$sf = new System_Folders();
$home = $sf->getHome();
echo "$home
";
?>
and compiled it as follows:-
php spear.php
to get the results as
Warning: require_once(System/Folders.php): failed to open stream: No such file or directory in /var/www/spear.php on line 3
Fatal error: require_once(): Failed opening required 'System/Folders.php' (include_path='.:/opt/ZendFramework/current/library:/usr/share/php5:/usr/share/pear') in /var/www/spear.php on line 3
how should i correctly set the path in /etc/php5/apache2/php.ini
or how correct is my path statement
include_path = ".:/opt/ZendFramework/current/library:/usr/share/php5:/usr/share/pear"
in /etc/php5/apache2/php.ini
View 1 Replies
View Related
Jul 27, 2010
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies
View Related
Nov 12, 2010
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
View 2 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
Nov 23, 2010
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies
View Related
Feb 19, 2011
I am trying to upgrade my NAS with anew toolchain, gcc-4.5.2. The NAS have been "hacked" fonz_plug, that contain a gcc version 4.1.3 with uClibc. I have download all needed tar files and done the following.My goal is to upgrade the gcc to 4.5.2 and replace the ucLibc on the system with a GNU libc.
# Pass one
#
# binutils
./configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --with-gmp=/ffp --with-mpfr=/ffp
But when I try to compile the gcc with
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-__cxa_atexit --with-float=soft --enable-languages=c,c++ --with-build-sysroot=/ffp --with-build-time-tools=/ffp/bin --with-system-zlib --enable-threads=posix --disable-bootstrap
[Code]...
View 6 Replies
View Related
May 31, 2011
I'm using Slackware 13.37 x64 (upgraded to slackware-current) and I have trouble compiling mysql workbench 5.2.34.
The error is:
Code:
scintilla-marshal.c:2:25: fatal error: glib-object.h: No such file or directory
But I have that glib-object.h file:
Code:
$ locate glib-object.h
/usr/include/glib-2.0/glib-object.h
This is when I try to compile version 5.2.27:
Code:
./PlatGTK.cxx:13:21: fatal error: gdk/gdk.h: No such file or directory
Code:
$ locate gdk.h
/usr/include/gtk-1.2/gdk/gdk.h
/usr/include/gtk-2.0/gdk/gdk.h
View 12 Replies
View Related
Mar 4, 2011
Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
View 6 Replies
View Related
Sep 6, 2009
This morning when attempting to upgrade (aptitude update; followed by aptitude safe-upgrade) my system I started receiving the following error:
Preconfiguring packages ...
(Reading database ... dpkg: unrecoverable fatal error, aborting:
unable to open files list file for package `apache2-doc': Stale NFS file handle
E: Sub-process /usr/bin/dpkg returned an error code (2)
A package failed to install. Trying to recover:
It doesn't seem to matter what repository I use or what particular package that I attempt to upgrade (all or just a single package). (In particular, apache2-doc is not even a package being upgraded, although it is installed on the system.) I have rebooted, run apt-get clean, run apt-get check, etc. to no avail. I am running a standard Debian (5.0.2/Lenny) desktop PC and am not running any NFS processes, client or server.
View 5 Replies
View Related
Dec 9, 2010
whenever i am trying to compile a c++ program i am getting the following error sample.cpp:1: fatal error: iostream.h: No such file or directory compilation terminated
View 1 Replies
View Related
Jan 16, 2011
Recently I have downloaded TBB and I want to run a program using its libraries. But I encountered the following error: Linker: fatal error LNK1104: cannot open file 'tbb_debug.lib'
View 1 Replies
View Related
Aug 16, 2010
After trying to unsuccessfully install OSS4, it seems I've broken ALSA and have no sound. I've uninstalled the oss4 packages and rebooted, and now alsamixer reports "cannot open mixer: no such file or directory". Here's the output of aplay -l: List of PLAYBACK Hardware Devices aplay: device_list:244: snd_ctl_pcm_next_device PulseAudio also doesn't find any hardware devices, though it is able to play to the Apple Airport Express down the hall. I'm running 10.04 64-bit on a Thinkpad X61.
View 1 Replies
View Related
Oct 13, 2010
since the recent upgrade to Maverik every time I boot this error message appear on the top of the screen: "modprobe: Fatal: Could not load /lib/modules/2.6.35-22-generic/modules.dep: no such file or directory" fter that plymouth starts without any graphics and the first visible object is the login interface (GDM)
View 1 Replies
View Related
Jun 12, 2011
I'm trying to build a program called Obpager, but I'm getting an error saying I don't have xlib.h. From what I understand, that file is included in libx11-dev, which I have installed. Any idea?
Code:
dagoss@MAGIC-PORT:~/Downloads/obpager-1.8$ make
Compiling src/main.cc
In file included from src/main.cc:33:0:
[code]....
View 2 Replies
View Related
Oct 2, 2010
I have updated to ubuntu 10.10, but when I try to compile chromium on ubuntu, I get this error:
Code:
In file included from /usr/include/gtk-2.0/gdk/gdkcairo.h:28,
from /usr/include/gtk-2.0/gdk/gdk.h:33,
from app/active_window_watcher_x.cc:6:
/usr/include/gtk-2.0/gdk/gdkpixbuf.h:37: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
What I don't understand is why gtk-2.0/gdk/gdkpixbuf.h complains that gdkpixbuf/gdk-pixbuf.h is not found. And how can I fix it?
View 7 Replies
View Related
Mar 6, 2011
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
View 1 Replies
View Related
Jun 22, 2011
I have iMac 2.4GHz with rEFIT installed. I installed Unity on one of the partition. Kernel is still 2.6.38.8. I am getting error message when I run the command
sudo gedit /etc/x11/xorg.conf
The error message is
(gedit:2139): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.AC7YXV': No such file or directory
(gedit:2139): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
View 3 Replies
View Related
Feb 15, 2010
there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies
View Related
Aug 8, 2010
I was looking to download "America's Army" and was doing alright until I hit a slight snag, It had an error while loading libgtk1.2, so I scoured the Internet for a way to fix this and the find command I found just told me it couldn't find the package, this is the first error I got when I tried to uncompress the "America's Army" version I downloaded:
/home/zac/.setup3597: error while loading shared libraries: libgtk-1.2.so.0: can not open shared object file: No such file or directory.
View 1 Replies
View Related
Dec 22, 2010
I followed [URL] that thread for installing BitPim on 10.04, but am getting this error:
Quote:
Traceback (most recent call last):
File "/opt/cx_Freeze-3.0.3/initscripts/ConsoleSetLibPath.py", line 35, in <module>
File "src/bp.py", line 20, in <module>
File "src/bp_cli.py", line 21, in <module>
[code]....
View 1 Replies
View Related
Mar 11, 2010
Here is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
View 1 Replies
View Related
May 11, 2010
I've got a problem with running a program called Synapse in ubuntu 10.04.
When i run "runSynapse.sh" script nothing happens. Then i tried running it from terminal with sudo command and this is what i got:
Code:
error while loading shared libraries: libalter.so.1: cannot open shared object file: No such file or directory
I checked the synapse directory but libalter.so.1 was there.
View 1 Replies
View Related
Sep 6, 2010
Whenever I try to install a game thats in a .run file format, I get the following error. libgtk-1.2.so.0: cannot open shared object file: No such file or directory
I am trying to install Unreal Tournament.
View 4 Replies
View Related
Jan 6, 2010
my squid show like this when i try create swap directory
[Code]....
View 2 Replies
View Related
Oct 31, 2010
After upgrading from 10.4 to 10.10, the Ubuntu Software Center refused to start, and I got an icon in the notification area saying that "a problem occurred when checking for the updates." When I run software-center in the terminal, I get this error message:
Code:
Traceback (most recent call last):
File "/usr/bin/software-center", line 88, in <module>
from softwarecenter.app import SoftwareCenterApp
File "/usr/share/software-center/softwarecenter/app.py", line 32, in <module>
[code]...
I've tried re-installing apt and all related packages, even dpkg, and even downloaded the apt package directly from the ubuntu web site, but no matter what I do, I can't run these things. Aptitude and apt-get seem to work fine.
View 7 Replies
View Related
