it does not permit me use Times New Roman font! It says down the dialogue box Font on MS Word that it is not, like, installed, and that it will use the most likely one. It's not good, because the texts (all of them) get italicized when I open some on it. It was working fine before. I use Wine on Lucid Lynx, very updated.
View 4 Replies
The OpenOffice word processor can open and read Microsoft Word files containing XML (.docx) perfectly well, but it--or KDE--does not seem to recognize a .docx by default. To open one with OpenOffice, I have to manually tell OpenOffice to open it, by going through the "open with" option on the right-click menu and specifying soffice. That's obviously not a problem, but it's a minor curiosity. Haven't Word XML files been around long enough that KDE and OpenOffice should recognize them immediately?
I'm not quite sure which to blame this on--KDE or OpenOffice--but KDE seems more logical. And is this a small limitation of KDE 3.5? because I'm still using 3.5. (I'm trying to switch over to Trinity, but have not made the switch yet.)
Well, I am facing one issue:How can i read two files word by word at a time using any loop as i need word by word comparision in shell script?Please let me know pseudo code.
View 14 Replies View RelatedI have a output file look like this:
{"test1" : "test2", "test3" : "test4"},
How can I read word by word in each line?This is not working code:
a=0
while read word
do a=$(($a+1));
[code]...
Want to search for ~ and delete it as well as to append the entire line to the above line. For Ex:
1111xxxx date Sandy area is ~around this area.3222xxx date There seems to ~left side of map, the colours are accurate (showing green areas)Even if I ~zoom in, the green parks, xxx3258 date The dammed up
~away, the "other" body of water varies ~blackNatural gas leaching.
IT MUST LOOK LIKE:
1111xxxx date Sandy area is around this area. 3222xxx date There seems to left side of map, the colours are accurate (showing green areas)Even if I zoom in, the green parks, xxx3258 date The dammed up away, the "other" body of water varies blackNatural gas leaching.
I am pretty new to bash scripting...I am trying to write a script that will take an input and read it word for word and then DO something with it like echo. I have been able to find how to read word for word from a file but I don't know how to do it with input.
I was looking for something like
Code:
exit 0 The input would be A-Z a-z 0-9 and have a single space between each word.
I have to modify formsweb.cfg file in Oracle IAS.
Problem description
In formsweb.cfg file are two lines with labels archive_jini= and archive= at the beginning of line. After equal sign (=) is row of filenames of java archives delimited by coma(,). When I insert a new jar file in java directory, I have to append the very same name of jar file to both lines if that name is not yet present.
Example snippet from formsweb.cfg
I just finished installing a bunch of truetype fonts. After installing them, firefox is displaying "bradybunch" font when I search google.
The font settings are all serif and sans serif in both the system fonts settings and firefox settings.
I am using ubuntu 9.10.
Any idea why this could be happening?
I would like to use the Adobe Garamond Pro in my text doccument in open office writer. I got a text document where from a friend where it is used so I know that it can. But when I want to edit I cant find it in the fonts dropdown menu.
View 2 Replies View RelatedI have a folder with over 1500 fonts, I would like to move them to my /usr/share/fonts folder so that they can be used. Some are from Windows, some are just random extras. I've installed the msttcorefonts, but there are quite a few missing that make some wen pages look different.
How can I go about putting the fonts from my folder, into the appropriate /usr/share/fonts folder to be used? And how can I move them all? I can't drag and drop them, and mv FONT_NAME /usr/share/fonts for all of them will take a month or two. Is there a way to elevate my self to be able to just drag and drop them all? And which folder would they need to go into for them to be used in Chrome and Firefox?
I have just installed openSUSE 11.2 X86_64 on my laptop, I then used KDE to install lots of type 1 fonts for my printer. These get loaded to /usr/local/share/fonts/...These installed fonts are visible to KDE (KWRITE) and GIMP so I assume that the installation was O.K. When I start openOFFICE writer I do not see these fonts. The font selection appears to be the fonts located under /usr/share/fonts. I have not tried other ooo3 components. I assume that they are not going to see the fonts either.
I have searched google and it appears that /usr/local/share/fonts is the correct location for non-packaged fonts. Has anybody any idea what is wrong? I think I could move all the fonts to /usr/share/fonts and ooo3 would work but this seems to break the installation directory structure. I have considered symlinks but I don't like the idea of defining a font twice to Linux and creating the syslinks is more work than reinstalling the fonts if they are lost
In linux is there a way to find the next word of a particular word of a file. grep displays entire line of the particular word. But i want only the exact next word of that particular word.is there any command for that.
View 13 Replies View Related1. What do I need to set all the fonts to in 11.04 to make them look more like W7 fonts?2. Is there a way I can improve the graphics in WINE? Some very simple games run slow. Is there a way I can change the cursors in wine.
View 3 Replies View RelatedFound a font bug: in the Arial-KOI type, the "è" word is replaced by a "X" word...
View 3 Replies View RelatedI am trying to install the open office suite using Add/Remove Software. It however give the following error:
Code:
dejavu-serif-fonts conflicts with dejavu-fonts
dejavu-sans-fonts conflicts with dejavu-fonts
dejavu-sans-mono-fonts conflicts with dejavu-fonts
I don't think that the regular 10.10 or 10.04 repos have XFCE 4.8, so I was wondering if anyone has any information on a PPA for XFCE 4.8 or that.
View 9 Replies View RelatedI'm very new to this , just got a acer revo 3600 with Linux but there seems to be nothing much on it apart from Internet , don't understand computers at all but am looking for word processor etc. been told to get ubuntu don't know how to or what it is also a bit stuck with the terminology.
View 9 Replies View RelatedAbiword is splitting words at the end of sentences. If I go to the end of the line and nudge the word, it will wrap but I get an extra space. I can usually delete the space. Sometime, the word will wrap correctly if I continue typing but this is not the typical case.
I know this is not a problem with OpenOffice but I don't want to install 70MB of program just to get a simple word processor.
I loose partial keyboard use after login. At first, I login, and can type about 1 word or so, then typing stops. I can use Ctl + Alt + Del to shutdown, restart or whatever. My volume and play stop, pause keys work when listening to music, but I have no pull downs. I can't use the Applications, Places, or System pull downs at all after the typing stops. However, I can still double-click things on the desktop, and I can also launch some launchers on the top system bar. I can browse the internet but no typing.
I once logged in, and did no typing for a couple hours. I just let it sit. Everything seemed normal until I started typing. Then it stopped typing, and no more pulldown menus. Another interesting fact is, I leave my computer on most of the time. I went away for 4 days and shut down my computer while I was gone. It was working fine when I shut it down, but then 4 days later when I boot back up, this crap starts. I'm using Ubuntu 10.04 on a Dell Precision 670. The keyboard is wireless, but I have recently changed the batteries.
My fonts are all set to times new roman or something. Yet the page shows up in wingings?
View 2 Replies View Relatedthis is driving me crazy. How can i in the terminal, display only the first 5 lines of say dmesg
View 7 Replies View RelatedMy Open Office word processor keeps closing after it's been open just a few seconds. I get to paste something I wanted to print into the word processor, and then it closes.
View 8 Replies View Relatedwhen I record something every word is repeated and it's very annoying
this is a sample(me reading the text above): [URL]
How can I install (or use if already installed) the Spanish language (Puerto Rico)?
It is not working for me.
I open the OpenOffice.Org Word Processor
I click:
-Tool
-Language
-Spanish (Puerto Rico) (For "Selection" or "For Paragraph" or "For All Text"), and nothing happens.
I am obliged o go online and use some of those "Type Spanish accents" online site to do my Spanish work. But I can't, it is too much because the accents, etc.
Also, I found some packages to download but it says that they are "Authenticated"
I want to write a small script to rename a bunch of files. Their name is of the form 'long number'|'name'|'extension', for example:
52354Football_part2.flv
2353452Nice_weather_4_ducks.flv
I would like to rename these to:
Football_part2.flv
Nice_weather_4_ducks.flv
If in my script I use something like
Code:
sed s/[0-9]//g
on each file, I will get
Football_part.flv, instead of Football_part2.flv,
and
Nice_weather__ducks.flv, instead of Nice_weather_4_ducks.flv.
how to instruct sed to only remove numbers that are in the beginning of the name in a simple way?
I know there are templates for writing cv's in word through windows.Are there any within Linux ?
View 1 Replies View RelatedI tried to install word2007 on kubuntu 9.10 with wine1.01 but everytime i got an error message in wine saying "setup cannot continue because a required file is either corrupt or not available. Run setup again from the original source disk or download location"
This is strange because in my previous installation of kubuntu 9.10 I could run word2007 without any problems.
When sending to a typical windows user a text document created in open office what must the file extension be for the MS user to be able to open it.
View 5 Replies View RelatedDoes someone have code or a program that will randomly shuffle letters in a word?
View 4 Replies View RelatedI have a word file that i transfered to my ubuntu laptop, when i copied it here it was changed to a rtf file
When i try to open this file Openoffice opens up but then immediately freezes and when I click on quit it tells me openOffice is not responding. I just did an update and its still doing the same .
