I've added mpd to System->Preferences->Startup Applications several times and it always just disappears and of course isn't started. I have used both mpd and /usr/bin/mpd as the command. I have done a log search as follows:
Code:
sudo find /var/log -type f -mtime -5 -exec grep -i -e 'mpd' '{}' +
and nothing significant was found, e.g. an error message indicating that the mpd startup command was removed.
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
I install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
As the title implies, I have fluxbox and conky running in Karmic. The problem is getting conky to start at startup. Below is my ~/.fluxbox/startup file. I have searched and tried everything I have found to get it to work. Conky works beautifully when I run it manually. Anyway, here is my startup file:
Code:
#!/bin/sh
xmodmap "/home/doug/.Xmodmap"
unclutter -idle 2 &
conky &
exec fluxbox -log "/home/doug/.fluxbox/log"
Lines added before and after the conky line run perfectly. Unclutter runs, but no conky.
How do I make something start on boot? I remember there being a command.. nano something, can anyone tell me?
View 3 Replies View RelatedThis is a weird problems.Everytime i log on to my computer/restart my computer, the terminal always autostart.I already checked at startup application.No terminal there.Any suggestion to stop the terminal from autostart with startup?
View 2 Replies View RelatedI want to have it with vnc remote, because I want to have it in a place away from monitor and if it shuts down I have to connect it with a monitor and keyboard enter the user password and open vnc. So I want to do as windows start vnc on startup, and I don't know if it's possible enter the user password from remote.
View 4 Replies View RelatedIm trying to get iBus daemon to start on boot, but cant seem to do it. In the Desktop Session Settings window iBus is not listed in the start up programs and there is no option to start in on boot in the iBus preferences window. How do I tell my computer to start it up when I boot?
View 4 Replies View RelatedI'm having difficulty making Autokey start at startup. I use the startup applications utility but don't know how to use it properly. I guess that I'm supposed to navigate to Autokey's executable but don't know where that is or if it exists because I don't understand the file system.
View 2 Replies View RelatedI need to start vboxwebsrv and x11vnc on startup with a specific username.I tried entering the commands in rc.local as:/bin/su -c "/x11vnc -forever -usepw -httpdir /usr/share/vnc-java/ -httpport 5800" user1/bin/su -c "/usr/bin/vboxwebsrv -b" user2.But this does not start the app on startup.
View 2 Replies View RelatedI wrote a script, and what to make it surring with ububtu as startup shell.
View 9 Replies View RelatedI have a problem in my Ubuntu box. The applications defined in "Startup applications" fail to start. On another user's account, everything works fine. I think that's some configuration problem. Where are the data of of the startup applications stored? (i suppose it's .xx file that I could just delete to restore defaults)
View 8 Replies View RelatedA lot of times when I start up my computer, instead of the graphical login screen I'm brought to a CLI login. If I log in and do "startx," it'll start KDE, but sound doesn't work and the shutdown/restart options disappear. (The logout option is still there.) It's inconsistent; sometimes it'll start the GUI and sometimes it won't. I have yet to find out what causes it to work right and what causes it to bring me to the CLI. When it doesn't work, if I run "shutdown -r now" or "shutdown -h now," it'll start the GUI as the computer is shutting down. I've tried Ctrl+Alt+F7 when it's brought me to the CLI, but it didn't do anything
View 2 Replies View RelatedConky does not start during start up.I used this script, It has execute permission also!But it did not start! What is the problem!It works manually when i run that script!
Note: It is not working in the background also at startup as i checked it -When is run killall conky it showed No such process
Using 10.04. I use one machine mostly as a printer server: If it goes down for whatever reason I want to restart without having to enter any password. Samba seems to start and allow file shares, but does not start the printer sharing so I must manually enter "sudo restart smbd" to allow the printer sharing. From reading the various threads I guess that the samba "start command" is before the printers are "initialized" and thus are not "setup". So how can I make the samba "startup" last after everything else? I am not enough familiar with all of the commands to understand the thread posting to make it work.
View 2 Replies View RelatedI recently updated to Ubuntu 10.04. On this same machine I've used Ubuntu for 3 or 4 years now. Upgrading from 8 - 9 - 10. I love Ubuntu and use it as my everyday work environment. Anyway, recently when I start my machine in the morning it boots to commandline instead of the desktop. For the last couple days I boot to safe-mode and do a package repair. Sometimes more than once. Eventually I get the desktop to start but it is annoying. When trying to boot to Fail Safe Graphics Mode(?) I get an error stating: "Fatal Server Error: No Screens." The message referred me to /var/log/Xorg/failsafe.log. Here is a snippet of the end of that log file:
[code]...
Also, I'm using an NVidia graphics card on an HP machine. I installed the "current version" accelerated graphics driver which it says is proprietary.
I'm putting a program in my startup applications that is completely GUI, with no command line options. The program is Calibre, if anybody is curious. Is there any way to start this program minimized? Gnome, Lucid, x64
View 1 Replies View RelatedI have put som programs in System -> Preferences -> Startup. That works fine, except that Synaptic starts without asking for a password, and therefor also without superuser privileges.Is there a way I can change the command so that it will ask for a password?
View 1 Replies View RelatedI've recently installed ubuntu 10.10 again and when I boot it starts in ffy1 console, in which I need to login.After the login in console version it will display the error after this it takes ~30 seconds till the normal graphical login screen I've searching the forum about this problem but haven't encountered the solution anywhere nor the problem itself.And yes I do see the disk errors but that would be during the login on the graphical screen.
View 3 Replies View RelatedI'm having a weird problem, eth0 does not start neither on bootup nor ifup...not even issuing /etc/init.d/networking restart...i will show you some info just to check
[Code]...
how can I execute pppoe-start on Slackware during startup or reboot? What is the proper way? Should I add a script on rc.d directory?
View 2 Replies View RelatedEvery time I start Ubuntu, I set up an ssh session to a server. In order to automate this I made an entry in startup programs like this:/usr/bin/gnome-terminal -e '/usr/bin/ssh name@server.com'Nothing happens when I log in, and I've checked that the command works.
View 2 Replies View RelatedI am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.
How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.
[Code]...
How to auto start programs in startup time?
View 4 Replies View RelatedI'm preparing a vitualization server (host) with VirtualBox. This machine, running Debian, is intended to run in HeadLess mode, without GUI.
I've got some guests VMs running. But I was wondering about the best way to start this guests VMs on startup and shut them down kindly when host is shutdwon.
Virtual Machines run under non-root user. I was thinking about making a script in /etc/init.d/ in order to start certain VMs and to stop every VM running when system is halted. Is this really the simplest and most secure approach?
Actually I couldn't find very much on this subject in user manual or googlin' around.
my Conky needed the Coretemp, and a friend of LQ told me to run modprobe, and it works greate! no every time I start my system, I need to run the modprobe to add the module to Kernel. How can I put the coretemp to start every startup? (I think there is somenthing to do with a file on the rc.module at /etc/rc.d/, but I'm afraid to do something stupid...) I want to make the conky running after start of the system. How can I do this?
View 2 Replies View RelatedI have to use pppoe because my ISP uses service names, and as far as I know the only program which lets me input a service name is pppoe (inside the pppoe.conf file). Networkmanager is buggy because it tends to disappear from the panel periodically and, worse, it doesn't reconnect (although the option is selected, it does reconnect only once).
So, for peace of mind I open a superuser terminal and enter "pppoe-start" and "pppoe-stop" to have everything I want (reconnects automatically, etc.). Now the question is: how can I have pppoe-start run at startup, automatically, without entering superuser mode, and without having a terminal open for this? Using Debian Testing (Wheezy).
I It does not start when the system boots. The smbd daemon is present and there are no suspicious messages in the system log, dmesg or the samba logs. The nmb service *is* enabled at all of the relevant run levels and does start if I issue the command "service nmb start" as root after I log in. This particular box's networking is 802.11n via a usb port and is under the control of the network manager. I have another fedora 12 box with an internal intel 5100 802.11n card and it does not have this problem.
View 10 Replies View RelatedHow to add something to start when you are logged in (System -> Preferences -> Startup Applications), but I want to know, where this parameters stored.
View 2 Replies View Related