This is a weird problems.Everytime i log on to my computer/restart my computer, the terminal always autostart.I already checked at startup application.No terminal there.Any suggestion to stop the terminal from autostart with startup?
View 2 RepliesEvery time I start Ubuntu, I set up an ssh session to a server. In order to automate this I made an entry in startup programs like this:/usr/bin/gnome-terminal -e '/usr/bin/ssh name@server.com'Nothing happens when I log in, and I've checked that the command works.
View 2 Replies View RelatedIm trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
Recently I've updated from 13 to 14. However, after updated I've tried to work with my terminal and it seems doesn't works fine. I can read 'starting terminal' but after that it's closed.I've uninstalled and re-installed it through the graphical tools (gnome-terminal) but that doesn't works fine.
View 3 Replies View RelatedI want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
I install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
when my netbook remix 10.04 starts I can see only terminal and no graphic interface (as you can see in the picture). I see the log in screen type my password and when the screen like on the picture. I 'm using lenovo N100 nb Tryed to install ubuntu desktop but no use
View 9 Replies View RelatedI know how to make things run at startup, and obviously know how to run a command in terminal (type and enter... duhhhh). However I would like to be able to run vnstat in terminal when my computer logs in, this is very handy for seeing how much I have downloaded. I have a terminal embedded on the desktop and would very much like to run vnstat in it for me when it starts, I know I could just type in vnstat when I've logged on, but where is the fun in that? Just having it already there for me would be far better.
The command for starting my desktop terminal is as follows:
Code:
gnome-terminal --window-with-profile=trans --geometry 90x40+280+30
I know this has been asked a 1000 times, but none of the solutions I've read so far work.I need to run the following terminal command every time Ubuntu (10.04 64bit) starts:Code:xset m 9 1This boosts mouse speed to maximum. I don't know why, but it is the only thing that works. All built-in mouse settings are at maximum, yet my mouse crawls across the screen when Ubu starts. So far, I have tried:Creating a startup script called "/etc/init.d/autorun.sh" containing code...
View 9 Replies View RelatedI've searched everywhere, but they all talk about BOOTING into the terminal instead of ubuntu. But here all I want is for ubuntu to automatically run a certain command when I boot into ubuntu.This is related to the screen brightness change problem that's still much of an unsolved mystery for ubuntu and I have mostly solved this 'm able to change the brightness with sudo setpci -s 00:02.0 F4.B=xx, xx being from 00 to FF, but it doesnt seem to stay when I log out and log back in. Is there any possible way to put a terminal command in the startup applications or something or a possible solution to the brightness problem that I havent discovered yet?
View 9 Replies View RelatedI recently upgraded to Ubuntu 11.04, and I installed it via the Update Manager and restarted as normal. But, as I went on my dual boot OS selection screen and selected Ubuntu, this message appeared:
init: udevtrigger main process ( 398 ) terminated with status 1
init: udevtrigger post-stop process (404) terminated with status 1
init: udevmonitor main process (397) killed by TERM signal
The disk drive for / is not yet ready or is not present
Continue to wait; or Press S to skip mounting or M for manual
I'm afraid to do anything after this screen...
Well, I want to run a terminal command at startup. I Google searched, but all the threads were ~5 years old. The command I want to run is code...
View 9 Replies View RelatedI have a question regarding terminal. I try to launch it from the "Startup Applications" by entering a script.Code: sh -c '/usr/bin/gnome-terminal'but it does not start.Also, when it does start I would like it to auto run certain commands: navigate to my project folder run "play test" open a new tab run "top".how can I achieve this?
View 9 Replies View RelatedIve got a simple bash script that basically just displays a couple lines of text and a random quote. In startup applications, I made "gnome-terminal --full-screen" open up and in the profile preferences of gnome-terminal I made it run my startup script. There are two problems though.(1) At startup, 2 terminals are opened (one fullscreen, one not fullscreen)(2) By bash script runs and keeps on running (how do I get it to display another input line?)
View 5 Replies View RelatedI'm having trouble with the rc.local file. So I tried the suggestions on this page[URL]I could run the script ok through the terminal. But it doesn't run on startup. Has anyone got this to work in the way explained in the link above? I'm using Ubuntu Lucid.
View 2 Replies View RelatedI would like to setup a command to run when I start up the terminal, but have the terminal stay open for use when it's finished. I was trying to get my terminal to run fortune whenever I start it just for cosmetic value, so I tried changing the launcher command to gnome-terminal --command=fortune, but that makes it just output the fortune result and then terminate.
View 1 Replies View RelatedI've added mpd to System->Preferences->Startup Applications several times and it always just disappears and of course isn't started. I have used both mpd and /usr/bin/mpd as the command. I have done a log search as follows:
Code:
sudo find /var/log -type f -mtime -5 -exec grep -i -e 'mpd' '{}' +
and nothing significant was found, e.g. an error message indicating that the mpd startup command was removed.
I am quite aware that one can add a startup application to the gnome session by going to System -> Preferences -> Startup Applications (Sessions). But, is there a way to achieve the same thing via the terminal? I want to know because I am writing a simple bash script that installs all of the programs I commonly use. One such program is compiz fusion with fusion-icon.And so I want to add the fusion-icon into the gnome session with my script (strictly within the terminal).
View 2 Replies View RelatedI wanted to write the script which runs at startup and opens the terminal window the moment desktop screen appears(GNU linux).
View 3 Replies View RelatedI have written a script to display a message that I wish to run whenever a terminal session is initialized.
The script is working but I am unclear how to implement it.Do I need to create a file called 'gnome-terminal.sh' in /etc/profile.d?
I'm a day-1 Ubuntu user with a question about getting multi-touch scrolling enabled on my laptop automatically each time 10.04 loads. I'm very green when it comes to all-things-Linux. Basically, I'm just searching for help, following step-by-step guides, and copying-and-pasting commands. I found the following website that helped me create a little script to enable multi-touch control:[URL]...
But I can't figure out the last step: "All you need to do to have this run at startup [instead of typing ./2fsrl in terminal manually each time] is add it to you startup programs." I tried creating a file path to the 2fsrl file in Preferences -> Startup Applications program, but upon re-starting the laptop, the multi-touch isn't enabled anymore. I'm sure I'm missing something simple. Can anyone advise? (Keep in mind my beginner's status!)
After several upgrades (from 8.xx) I noticed Gnome terminal took about 4 seconds to open an window and another 4 seconds to give me a prompt. This is excruciating when blasting out CLI in dozens of terminals ssh'd into dozens of machines. Tabs were no different.
Fix was: Comment out anything in ~/.bashrc that references xterm. BOOM less than 1s total to prompt.
If it's faster than I can get my mouse hand back to the keyboard to start blasting CLI, it's good enough
As the title implies, I have fluxbox and conky running in Karmic. The problem is getting conky to start at startup. Below is my ~/.fluxbox/startup file. I have searched and tried everything I have found to get it to work. Conky works beautifully when I run it manually. Anyway, here is my startup file:
Code:
#!/bin/sh
xmodmap "/home/doug/.Xmodmap"
unclutter -idle 2 &
conky &
exec fluxbox -log "/home/doug/.fluxbox/log"
Lines added before and after the conky line run perfectly. Unclutter runs, but no conky.
How do I make something start on boot? I remember there being a command.. nano something, can anyone tell me?
View 3 Replies View RelatedI want to have it with vnc remote, because I want to have it in a place away from monitor and if it shuts down I have to connect it with a monitor and keyboard enter the user password and open vnc. So I want to do as windows start vnc on startup, and I don't know if it's possible enter the user password from remote.
View 4 Replies View RelatedIm trying to get iBus daemon to start on boot, but cant seem to do it. In the Desktop Session Settings window iBus is not listed in the start up programs and there is no option to start in on boot in the iBus preferences window. How do I tell my computer to start it up when I boot?
View 4 Replies View Relatedi'm trying to automate terminal commands to execute at startup (rc5)one is a background process: Code: xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Two-Finger Scrolling" 8 1 the other is a gui application: Code: /home/labr/apps/gmail-notify/notifier.py i placed these commands in /etc/rc.local but does nothing.
View 2 Replies View RelatedI successfully created launchers for apps and I can run them in terminal with double clicking.Now I want them to run on startup, automatically. They run with arguments.There is System-> Preferences -> More Preferences - > Sessions - > Startup Programs where I can add my commands.I put:
gnome-terminal -e "/some_path/myapp1 -arg1 - arg2"
gnome-terminal -e "/some_path/myapp2 -arg1 - arg2"
I'm having difficulty making Autokey start at startup. I use the startup applications utility but don't know how to use it properly. I guess that I'm supposed to navigate to Autokey's executable but don't know where that is or if it exists because I don't understand the file system.
View 2 Replies View Related