I'm running Ubuntu 10.04 Lucid Lynx Desktop Edition and most of the time I get these random freezes and then I have to turn off my computer and reboot it back on. It's getting really annoying because I am constantly downloading huge packs of data and it freezes and then I have to start re downloading...
View 2 RepliesIt seems that my Ubuntu 10.04 (clean install) to randomly freeze / hang (mouse/keyboard unresponsive, only a hard reboot is available as option) but with no garbled screens/windows/etc. There's no pattern why or any application that could be responsible. It could happen ten minutes after it is started or after 2 days but at some point and suddenly the system will become totally unresponsive, freeze and hang up. I used the same PC with Karmic Koala and releases before that (sometimes on for days) with no such problem so it shouldn't be a hardware problem.
I thoroughly check system logs after the hard reboot (System > Administation > Log File Viewer) and there's no entry around the time of each freeze / hang to pinpoint me to something.
The only thing that is certain is that the following errors / warnings always appear in .xsession-errors file:
Here is also some info about my system:
M/B: ASUS P4R800-V DELUXE
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
RAM: 1GB
Graphics: ATI Radeon 9100 IGP
1st post @ LQ. Ubuntu user since 2007ish. Lots of PC experience... now vexed by upgrade from 9.10 Karmic to 10.04LTS Lucid.
The problem: random freezes whenever I boot into Lucid as user through usual Grub menu. The freeze sequence is: 1- screen stops, 2- mouse pointer freeze w/ no effect on click but moves freely and keyboard is useless, 3- screen blacks out for about 30 seconds and then returns but is unusable and 4- constant HDD activity for about 5-10 seconds. I have waited several minutes for a recovery of some sort but no dice. I reboot via on/off or reset button. Ubu deletes 2 inodes and then I'm off and running again.
If I boot through the recovery console there are no problems at all. The recovery console sequence: 1- select recovery from Grub menu, 2- at recovery menu select drop to root command prompt, 3- give root password, 4- enter 'gdm' at console prompt, finish boot up in my only user desktop (not root.)
I have not been able to find any log files that show an error message, but I'm not so tech oriented that I would necessarily know one if I saw one. Through many hours of browsing posts describing Lucid problems @ UbuntuForums (one of which has over 1,000 responses) I have found my '.xsession-errors' file (attached) is full of data.code...
I had to do quite a lot of digging before I managed to work out how to do this. It turns out to be reasonably straight forward, and so here is my howto all in one place.
Objective: Connect to my Ubuntu (Lucid Lynx) Desktop machine (which does not have a screen or keyboard) using a remote desktop viewer and get my usual GNOME desktop interface. And have the desktop persist while I am not disconnected.
I have recently discovered one niggly issue with some of the keys being messed up. 'm' and 's' in particular? I am looking into it and will update this post when I have resolved it.
The following steps were performed on a freshly installed version of Ubuntu 10.04-desktop. Just for clarity:
Code:
Install a VNC server. There is a choice of servers I chose the "tight" one.
Code:
Setup your VNC password. This password isn't very important as my setup will only allow for connections via SSH, so 123456 is what I used. One can possibly disable it?
Code:
At this point or the first time you run 'vncserver' (I forgot to check) the all important and much discussed ~/.vnc/xstartup file is auto generated. This is the make or break place where you can either get GNOME over VNC or not. My xstartup which required NO changes was:
Code:
Give the VNC server a test, by running it from the command line.
Code:
Try connecting to the VNC server:
Code:
Ok if that all worked then great! It all did for me and my machine was fresh from the CD.
Now we setup the VNC server to run all the time. There are a variety of ways of doing this. Since this howto requires the use of a SSH shell one could quite easily run the vncserver (as we did above to test it) and then disown (haven't tested if this is actually required) commands the first time you connect. This would leave the VNC server running until you used the vncserver --kill command. This would be a suitable approach if you had many different users wanting to have VNC GNOME desktops.
For convenience in a single user setup we can get the VNC server to be started at boot time:
Code:
Make the contents of 'vncserver.user' (credits to some smart guy on some blog out there that I couldn't find again. and then I made a few improvements):
Code:
Cant enable desktop effects Nvidia 9200M GS after update to Lucid Lynx
View 3 Replies View RelatedHow I can boot my desktop (Ubuntu Lucid Lynx 10.04) into runlevel 1? Can you also tell me how to get from runlevel 1 back to the default (2)
View 3 Replies View Relatedexperiencing a lot of desktop freezes on Lucid. it goes fine for a while then i cannot minimize or maximize Sometimes i can open a new window from the top but often not
View 9 Replies View Relatedcan i install ubuntu 10.04 Netbook edition in my laptop? Is there any drawback in installing in laptop? which one is better-netbook edition or desktop edition?
View 4 Replies View RelatedI have been setting up a box now and have it configured with everything I need and is running great.I would like to test out the netbook remix edition is there a way to install the desktop environment along site with Gnome (like I use to do with KDE)Would be great so I wouldn't have to re-configure drivers and such.To be able to switch from Gnome environment to Netbook remix environment.I am running Ubuntu 10.04.
View 5 Replies View RelatedI've just upgraded from 9.10 and everything is good, accept that netbeans will not load.
I get the netbeans 6.8 splash screen then nothing
I am trying to install Lucid on my Laptop but can't get the live cd to boot correctly. At the moment, it's giving me a purple screen with a white logo at the bottom, then a black screen with the underscore character blinking, and then nothing. (I have an HP tm2, with a USB DVD/CD drive. 64bit intel core 2 duo. I am using the Ubuntu 10.04 Desktop AMD64 .iso. I also tried the i386 .iso)
View 1 Replies View RelatedUbuntu 10.04 is unable to set up my Canon Pixma IP 6000D printer.So earlier tonight when my wife wanted 2 recipes she saw on this am's Today Show, I had to restart my computer with a Fedora 13 live CD in the drive. F13 quickly installs my Canon printer and I am able to print the recipes.But this sure is a convoluted way of printing 2 short text files.to get my printer to work with Ubuntu.I've been using Ubuntu almost 2 years now, and love it, love it, love it, except for this one little thing.
View 3 Replies View RelatedWhat exactly are the different features btw Ubuntu 10.04 LTS vs 10.4.1 Lucid Lynx?
View 4 Replies View RelatedI've been using Ubuntu for a while now, and ever since I installed 10.10 (I did a clean install) I've been having problems with the computer completely locking up... nothing is responsive. I've not had this problem on any prior Ubuntu version. The problem started after I installed the updates for ubuntu... I have a hunch that its either the nvidia driver i installed or the latest kernel thats causing the problem. I'm using the proprietary driver for nvidia and my card is a GeForce6100 nForce 405... the kernel 2.6.35-22... as you can imagine its quite annoying having the computer lock up.. P.S.- the freezes aren't exactly random, they happen generally when I'm using high CPU %'s (e.g. when i import all my music at once to rhythmbox and playing spring rts)
View 9 Replies View RelatedQuote:
The new Wacom Bamboo Pen (CTL-460) doesn�t work in Ubuntu Lucid out-of-the-box. You need a newer kernel module than the one that comes with Lucid by default. It�s pretty easy to get it working though, you just need to know how.
First, install some compiling tools and header files:
Code:
Code:
Now unpack, configure compile and install it:
Code:
# I know this is the wrong version, but it's the highest available and it works
Code:
The tablet should work now. You can also add the module name to /etc/modules to automatically load it on boot.
He also says (and I can confirm) that the gray lines are the new borders of the tablet. A little annoying, but I imagine one could configure that, too.
I upgraded from Karmic to Lucid yesterday and today today I've noticed that I can no longer apt-get update through the terminal. I'm behind a corporate firewall, so up till now I've always exported the proxy address like so:
Code:
export http_proxy=http://user:password@address:port
This hasn't worked under Lucid. I did some searching and found that Lucid did away with
[code]....
I have tried out Lucid Lynx Beta 1 back in march. During the installation I was announced that support for bluetooth was dropped. I installed anyway, thinking it would be back in the Final Release. Meanwhile (between March and April) I reinstalled Karmic because I really needed the bluetooth. I can see in the upgrade that bluetooth still isn't available. What should I do about this? Is there a way to keep Lucid Lynx and bluetooth? Or will I have to stay on Karmic until the end of times?
View 5 Replies View RelatedIs there someone from Dallas, Texas, USA area? I've got a friend there with lucid lynx on a netbook - and she says something's gone wrong with it - she cannot boot. Maybe someone could maybe somehow meet with her and see if there is a possibility to fix it? As i don't really know what's wrong but I am on another end of the world and have no chance to figure it out.
View 2 Replies View RelatedI've got a generic USB keyboard (not wireless) that works perfectly on WinXP, the BIOS and the GRUB boot menu. As soon as Ubuntu 10.04 loads, however,he keyboard stops working. Tried different ports, still nothing. I haven't tested on previous versions of Ubuntu or other Linux distros. A PS/2 keyboard works great on Ubuntu except the one I have is broken, hence why I'm using this USB keyboard. Any ideas on how to fix this? It's the only thing holding me back from leaving Windows for good. lsusb:Quote:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
When I try logging in using any user name, ubuntu just returns to the login screen. I cannot actually log in. I used the recovery mode to create a new login with password 123456, and the same thing happens. What could it be? Ubuntu worked just fine for a while, then DKMS started causing problems, I had errors with upgrades, software installs/uninstalls, then my sound went. I found a great fix for the sound (https://help.ubuntu.com/community/SoundTroubleshooting), the sound came back, but then I could not log back in again. I cannot find any help for this issue, and had to install 9.10 Karmic Koala, and that's what I have been using for the past couple of days.10.04 has been fairly buggy for me and I am considering staying with 9.10, or going to another Linux distro.
View 7 Replies View RelatedI recently installed ubuntu 10.04 lts. Whenever i boot ,it hangs the moment i log in. I had the same problem with 9.10 as well.
View 1 Replies View RelatedI have just updated ubuntu from koala to lynx via reloading the synaptic repositories, and after having restarting, to boot into lynx, found that my laptop's keyboard doesnt work, none of the keys are reponding at all, which is odd as I have never had this problem with my laptop before.. I thought this might have been a (semi) common problem with lynx, but after a few searches, have not found anything similar to this problem..Does anybody have any idea what might be the problem here, I can still use the laptop to do things via the mouse and even access the internet and grab text and paste it for things, but obviously would like my keyboard back (i didnt write this on my laptop!) I am 99.9% sure it is not a hardware problem
View 4 Replies View RelatedI don't know how many has had this problem, but I understand I am not the only onehe problem is that after using synclient to disable the touchpad in 10.04 it would enable itself, seemingly, at random.Well, what I found was that unchecking the "Disable touchpad while typing" feature in "System->Preferences->Mouse->Touchpad" will fix the problem.Apparently the system does not recognize that the user has deliberately disabled the touchpad. And so it will reenable it when the user is "done typing".
View 5 Replies View RelatedWhen Ubuntu tries to update I get an error message saying it was unable to synchronize files in the repositories and an older index will be used.
View 2 Replies View RelatedWhen I'm connected via NX and press the up button, Ubuntu takes a screenshot. I filed a bug, but this makes it absolutely impossible to use the machine.
View 2 Replies View RelatedI've been installing and uninstalling POedit 1.4.2-5build0.1 Ubuntu 10.04 Lucid Lynx.POedit is installed but it loads for around 10 seconds and then just go away.I'm installing it using Synaptic
View 3 Replies View RelatedI've recently built a half-new computer and installed Lucid Lynx on it.I managed to get everything else working and even got the ATI drivers installed. However, I can't get above 60 Hz on my old CRT monitor - the ATI driver controls have 60 as the highest selectable refresh rate. The preferred 1152x864 screenmode works fine otherwise.
Here are the known specifications:
Monitor horizontal refresh: 30-86 kHz
Monitor vertical refresh: 50-150 Hz
Known working display mode on earlier graphics card: 1152x864, 85 Hz.
My motherboard (with integrated graphics) is the Asus M4A88TD-V EVO/USB3 AMD 880G AM3. The GPU is Radeon HD 4250.The ATI drivers seem to have "taken over" the xorg.conf, so I don't know where to input any values.
I recently installed Maverick Meerkat on a hand me down laptop. And noticed that when I entered the password for admin privileges to install from the update manager, a key icon appeared on the top bar. I moused over it and saw I could use THAT to end privileges before the 10 minute grace was up. I should have thought of it before, and, small as it is, I thought this was a great feature.So, when I upgraded from Karmic Koala to Lucid Lynx on my desktop, I thought that feature would be there, but it's not.So first I'm wondering if it's there, but just not default. If so, how do I get that icon to appear? If not, how do I otherwise end admin privileges early?
View 3 Replies View RelatedI tried for the better part of two hours to change the icons for my pdf files in ubuntu. For some odd reason, the icon for my pdf files is the same as the icon for the .odt and .doc files.
View 2 Replies View RelatedI was running a small LAMP setup on my homenetwork with Ubuntu 9.4. Every thing was working OK. I then upgraded to 10.04 and now my php does get executed. Apache is still working, but I suspect something in the config has changed, but I don't know what.When I try to load a .php file, the resultant web page is just blank, if I have a .html file with php code in it, the page is not rendered from the point where the php starts. I have checked /var/log/apache2/error.log and there is nothing in that file.
View 5 Replies View Related