how to tell to the linux system, that when it will switch to the sleep mode, system launch a specific code (in python).
So two solution possible?
1) set a specific config file witch inform system to launch a python.py code. ?
2) config my own screensaver witch execute app when system call it. ?
In the two case, I don't find informations on the web.
I have Ubuntu 10.04, and I have my power settings set so that my display is never supposed to go to sleep, yet it still does after 10 minutes of being idle. Has anyone else had this issue?
View 4 Replies View RelatedHow can I stop my display going to sleep?
I've got the Power Management settings for mains power as:
Actions - put computer to sleep when inactive - never
Display - put display to sleep when inactive - never
Screensaver settings are:
Regard computer as idle set to 2 hours
Unticked Activate screensaver when computer is idle
Yet the screen still goes blank after a few minutes when I'm not using it.
I dual boot and it doesn't do it in Windows. It didn't do it in 8.10 or 7.10 either.
Whenever I close my laptop lid or just press the suspend button, it will go to sleep just fine. Perfect. Waking up is the problem. The drive light flashes for a few seconds, and then it just goes to back to normal but my display is still busted.
View 9 Replies View RelatedI have Kubuntu 10.4 cleanly transformed to Gnome (aptitude task kubuntu-desktop was removed and ubuntu-desktop installed). I want to switch off the sleep key, because I sometimes press it accidentally and the computer goes to sleep. Fortunately the sleep is correct, no applications crash, but still some network connections goes away and it is annoying and time wasting. I tried to switch it off with the power management tool, but there are only two options: sleep to memory and sleep to disk. I am sure, there was "do nothing" option in some other versions, but it isn't there.
How can I fix it? Is it possible to hack it with some "edit gnome variables directly" tool? I am experienced linux user, but not a gnome or X expert, and I don't like to solve simple problems (and I think this is a simple problem) with complicated scripting and strange hacks.
My display is set to sleep after 30 minutes of inactivity. When I go to sleep at night I don't want to wait 30 minutes for the monitor to shutdown, is there any way I can use the keyboard (like a hotkey) for :
1. Start my screensaver (when I go for 5-10 minutes afk for example).
2. Make the monitor go to sleep mode.
When ever my computer goes to sleep it becomes unresponsive. No mouse or keyboard click wakes it up. The only thing I can do is press the power button which makes it completely reboot. This is killing my productivity. Anyone have any tips on how to make this function correctly?
View 9 Replies View Relatedhow to put my ubuntu 7.04 to sleep
when i run 'su pmi action suspend'
i got following output:
erdos@erdos-desktop:~$ su pmi action suspend
Unknown id: pmi
erdos@erdos-desktop:~$ sudo pmi action suspend
Password:
[Code].....
Asus u43f wont go into sleep/suspend mode. Either manually from the shut down menu or by closing the lid. the screen will turn off but the various lights do not turn of and hard drive continue to spin.
I found this suggested test with a google search but no fix
sudo /etc/acpi/sleep.sh
which returned:
cat: /var/lib/acpi-support/system-manufacturer: No such file or directory
cat: /var/lib/acpi-support/system-product-name: No such file or directory
cat: /var/lib/acpi-support/system-version: No such file or directory
cat: /var/lib/acpi-support/bios-version: No such file or directory
my PC running ubuntu goes to sleep whenever I don't type or use the mouse for a very short period of time when I have to reenter my password can I turn this facility off so that it doesnt go to sleep ?
View 3 Replies View RelatedI configured Dell Latitude D620 to go to sleep mode (suspend to ram) when i close the lid. It suspends ok and then I open the lid. It wakes up ok, but few seconds after goes to sleep again! So I need to press the power button to force it to wake up.
Sleep button works just fine. /etc/acpi/sleep.sh from console too.
/etc/acpi/events/lidbtn
Code:
event=button[ /]lid
action=/etc/acpi/sleep.sh
update:
I noticed that it always goes to sleep again when I wake up laptop by opening the lid. For example if I run /etc/acpi/sleep.sh, pm-suspend or press the sleep button laptop goes to sleep, then i close the lid and when i open it back - the problem occurs.
I'm running 9.10, how do I wake up from sleep or hibernation on my Dell XPS notebook? I have no problem putting the comp to sleep/hiber but can't seem to work out the keys to wake it up again.
I don't get any responses from the keys even when I try CAPS LOCK or NUM LOCK, so all I can do is reach for the on/off switch.
kubuntu 9.10, KDE 4.4.1, Nvidia driver 195
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
I am running Ubuntu 9.10 on my desktop and everynow and then I get this annoying problem. If I walk away for a bit, just upstairs to use the bathroom, sometimes when I come back the monitor is off and the power light is blinking. You know, like what monitors usually do when they are still powered on but the screensaver is done playing. However, this happens to me well before the 10 minutes that the screensaver is supposed to end.
It does not always happen, and I can't really isolate what may be causing it, as I never take a note of what I'm doing when I go pee. HOwever, I rarely do anything other that run VLC, Chrome, Firefox, or OpenOffice Writer.
The problem is that the screen won't wake up. Moving the mouse does nothing. Jamming some keys does nothing. Trying to go to text terminal does nothing. I have to either REISUB or hold down the power button on the tower.
I am trying to install Ubuntu 10.04 on my PC using NVIDIA GeForce 9150LE graphics and HP w2207h monitor. After using the Wubi installer and rebooting my computer, i select the ubuntu boot menu option and it says it is preparing to continue with the installation. after a countdown before it begins, my monitor goes to sleep. i used an eMachine monitor that i used in a previous installation of 9.10 that worked fine and reached the exact same problem. When booting from a live CD and selecting try without installing the screen comes up with a blinking underscore, and both monitors went to sleep. I believe its a problem with the graphics chip, but i dont know how to fix it.
View 9 Replies View RelatedThe question is instead of shotgunning the problem should I start with replacing the hard drive or the motherboard or the processor. Is there a way to tell what is blown? The house took a direct hit and most electronics were fried. The main problem is that I set the computer to never go to sleep and it does every few minutes and I have to log back on quite often. Several games no longer play or just quit in the middle of the game and sends me back to the desktop. I haven't tried to do everything yet so I don't know of other problems. I don't have a lot of extra money so I only want to replace what I have to. The computer is a Dell Inspiron with 2.5 Gb processor and an Nvidia card ordered from Dell with Ubuntu 10.4 installed.
View 9 Replies View RelatedI just recently changed one of my OSs to Ubuntu 10.04. I have run into a somewhat annoying problem. The problem: My monitor is going to sleep after 10 min. of inactivity no matter how I have the system set. I do not wish for this to occur, I mean why bother having a screensaver? lol I am using a desktop PC. The Power Management daemon is enabled. I have power management set to - Put computer to sleep when inactive for: Never Put display to sleep when inactive for: Never When power button is pressed: Shutdown When suspend button is pressed: Suspend
I have screensaver set to- Activate screensaver when computer is idle: unchecked Lock screen when screensaver is active: unchecked The duration slider is maxed out to 2 hours. The sleep function of my monitor is turned off. It's a Compaq WF 1907. I know it's Ubuntu because my monitor OSD is showing a "No Signal" message when it happens and it never happens when I am using Linux Mint 9. Since LM9 is built on top of Ubuntu, this leads me to believe a setting is simply not taking. Ubuntu is fully updated. I have a wonderful desktop set up and I would really hate to scrap it and go back to LM on this partition but this is really irritating. Is there some way to make it work the way it's supposed to?
anyway, been using lubuntu for a week after instaiing it instead of ubuntu as that was running to slow and its been really good, intsllad a few programs (wine, filezilla, kompozer, devede)but when I turn on the computer today, it boots into GRUB and i select lubuntu, and afer a few moments the monitor goes to sleep as there is "no signal"it does the same on recovery mode, after displaying a few lines of command firstI can still boot into windows
View 5 Replies View RelatedI just recently got my old box back and now I'm running 10.4. I've had some minor issues that I have got through but now there is one which seems to really be frustrating me. At any random time my monitor may go black as if it is in sleep mode. The problem is when it does this, no mouse movement or keystroke will wake the thing up. So I am forced to press the power button. When I press the power button the Ubuntu logo pops up on the screen as if it magically woke up but it is too late because now the computer is shutting down... When I go to System>Preferences>Screensaver I get to the options for the screensaver and I have about 2 seconds before that triggers the screen going black.
I can't even start until I know that my screen won't shut off at any random moment!
because of a bug that changes the device of an USB-HDD from /dev/sdb to /dev/sdc after wakeup I need to re-mount my external usb-hdd on wakeup. As far I found out this could be done with an script in /usr/lib/pm-utils/sleep.d I placed a script there and made it executalbe, the contents are:
Code:
#!/bin/sh
sudo mount -a
echo "working" /home/max/Desktop/test.txt
exit 0
If I execute the script from shell the HDD gets mounted, when waking from sleep/standby the script writes "working" in the specified file but the hdd won't get mounted. As I plan using the HDD as a NAS it's important it gets mounted again because otherwise the samashares are invalid
I took my Dell Netbook and built some kind of networkstorage around it, with an external USB-HDD.
So far everything is working as expected, the only hassle is that the netbook tends to go to sleep unexpected, for example while playing music, running streamripper or downloading a linux distro.
I couln't find any hints in the syslog or the PM logs what is causing the system to go to sleep.
Im wanting to put HDD's to sleep using hdparm after 20min of activity (a 4x disk raid5 array and two single disks). I have edited /etc/hdparm.conf, adding the following lines at the end of the file:
Code:
#6TB RAID5 POWER DOWN
/dev/disk/by-id/scsi-SATA_ST32000542AS_5XW0T1R6 {
spindown_time = 240
[code]....
Code:
sudo hdparm -y /dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJDWQ411622
The HDD's will sleep with out issue. Ive looked around my log files and cant seem to find anything to do with hdparm, or the HDD's sleeping. Have I make a mistake in the .conf file? Is there some place hdparm logs, or if I can activate some sort of verbose mode? Or does hdparm need to be activated on boot?
EDIT: I'm using ubuntu 10.04.1 x64 last updated today.
When I installed ubuntu 10.10, there was a notification to update my nvidia card with a new drive...I updated and after the reboot the screen goes to sleep but I can hear sounds
View 6 Replies View RelatedIf I set my Ubuntu 10.10 to sleep after an hour of inactivity, I can't leave Blender to render overnight. The processing that Blender is doing seems to be ignored, and the computer goes to sleep after an hour. How can I prevent this from happening? I don't want to set Sleep to Never, I would like the computer to sleep after Blender is done.
View 7 Replies View RelatedWhen I insert any USB device (flash drive, bluetooth device, Nokia USB data cable), my system goes in suspend mode (standby). Same thing happens when I remove the device. I have to wake up the computer by pressing a key or the power button. By the way, I don't think this ever happened in the first 3 or 4 days of installing Natty.
View 1 Replies View RelatedI'm having trouble getting conky to start automatically after resume from sleep. I've tried putting a copy of my conky startup script into /etc/pm/sleep.d but nothing happened.
My startup script:
PHP Code:
#!/bin/bash
sleep 20 && conky
I'm sure this doesn't need a new thread but after searching for a bit I didn't find much about this. The problem is this;My system sleeps quite well, I can resume from sleep and get back to the desktop. However. the one thing that doesn't resume is > networking.I can disable> re-enable networking from the NM-applet and it tries again to connect but won't.I can sudo /etc/init.d/ networking restart, which essentially is the same as above. No connectionI've run ifconfig, and the connection is there but no address. Has this bug not been solved? Is it just a driver issue with my particular network card?It's the realtek 8201, part of the VT8237 chipset.Does anyone know what to do about this? I've been avoiding sleep mode on this computer for a very long time because of this bug.
View 9 Replies View RelatedSince installing 10.04 yesterday my laptop will not wake correctly from sleep mode. Opening the lid wakes the machine up but the graphics are all wrong. Loads of tightly packed horizontal lines. Turning the machine off and restarting makes all ok. It's only on wake up does the problem happen. The laptop is an Acer 1652,with an ATI Mobile Radeon X300 graphics card. Intel Pentium M.
View 1 Replies View Relatedis there a way to get rid of the required password after i go away from my computer for 10 mins and the screen goes to sleep? It's getting really annoying
View 2 Replies View RelatedI am using ubuntu 10.04 . Even though i have set power options where it says "put power options to sleep" to "never"the computer goes to sleep after 5minutes. I again have to give the password to unlock .
View 1 Replies View Related