I'm having trouble getting conky to start automatically after resume from sleep. I've tried putting a copy of my conky startup script into /etc/pm/sleep.d but nothing happened.
My startup script:
PHP Code:
#!/bin/bash
sleep 20 && conky
I have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
I'm sure this doesn't need a new thread but after searching for a bit I didn't find much about this. The problem is this;My system sleeps quite well, I can resume from sleep and get back to the desktop. However. the one thing that doesn't resume is > networking.I can disable> re-enable networking from the NM-applet and it tries again to connect but won't.I can sudo /etc/init.d/ networking restart, which essentially is the same as above. No connectionI've run ifconfig, and the connection is there but no address. Has this bug not been solved? Is it just a driver issue with my particular network card?It's the realtek 8201, part of the VT8237 chipset.Does anyone know what to do about this? I've been avoiding sleep mode on this computer for a very long time because of this bug.
View 9 Replies View RelatedI just bought a Logitech V470 bluetooth mouse. It's no problem to let it work under Koala 9.10 (gnome), but after shutdown/standby/sleep, it doesn't work anymore. With my USB mouse, I have to click the bluetooth icon and select 'switch off bluetooth'. After that, I click 'switch on bluetooth' and bluetooth works again. I thought switching on and off bluetooth with the applet is the same as 'sudo /etc/init.d/bluetooth start/stop', but it isn't! The previous command greyes out/in the bluetooth icon, but it doesn't resume my bluetooth. If 'sudo /etc/init.d/bluetooth restart' would work, I would be able to add this line into /etc/pm/sleep.d, so it's automatically loaded on resume.
View 6 Replies View RelatedWhen my akoya mini E1210 with UNR10.10 resumes after sleep my wifi searches forever and then cuts out. When I do iwconfig the card seems normal for about a minute and then I do iwconfig again it gives gives no id. Reboot and bang, everything perfect. Did make new driver from latest ralink driver, as explained by Sven ,but nu change. Also blacklisted the rt2800 and rt2x00.
Seems that after sleep the wifi card driver is not loaded. Worked like a charm in 9.10 and in 10.4 (upgrade from 9.10). After update to 10.10, it went wrong.
extra: when I do sudo ifconfig ra0 up I get the message "SIOCSIFFLAGS: Operation not permitted" Also, after hibernation, no luck...
in dmesg found that the mailbox keeps MCU active, and rt2860 could not be initialised.:
Quote:
maarten-laptop kernel: [ 1902.168454] ERROR!!! NICInitializeAdapter failed, Status[=0x00000001]
maarten-laptop kernel: [ 1902.168788] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
maarten-laptop kernel: [ 1902.174003] !!! rt28xx Initialized fail !!!
When Evolution Mail is not used, everything is ok. I know this message is not related to mail, but it helps for a while. After longer period of sleep, same problem again. Firmware problem?
I have upgraded from Ubuntu 9.x to 10.04 LTS after the upgrade, my netbook goes to sleep in a short period of time and makes me login every time i resume. This is very annoying as i have to wait for login and sometimes my wifi connection drops. I just quickly want to check my messages. The delay is annoying and has me using a windows (argh) laptop instead. i miss my ubuntu netbook.
i have tried adjusting power management setting to never go to sleep and adjusted some other power management module from the command line, but with no luck. is there a way to reset the sleep pref's or any way to fix this.
Just recently I notice this behavior. When the machine sleeps either on timeout or after closing the lid, it doesn't come back on opening or hitting esc etc..
The machine seems to come back to life, but the screen stays black. I even tried Ctl-Alt-F1 with no response.
uname -a yields
Linux xxxxxxxxx 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
and lsmod for video yieldsvideo
17683 2 i915,nouveau
Whenever I resume my laptop, there is no audio... the only way to make it work is to restart my comp ...I am using fedora 14 on Thinkpad x201 .
View 1 Replies View RelatedConky does not start during start up.I used this script, It has execute permission also!But it did not start! What is the problem!It works manually when i run that script!
Note: It is not working in the background also at startup as i checked it -When is run killall conky it showed No such process
I'm experiencing low importance nuisance with conky. I'm running ubuntu 10.10 and use conky to have basic system overview. Whenever I mount/umount USB flash, conky disapears from display. It does not crash, it only falls into neverending sleep (process state: Sl+). When I send rehub signal (kill 1 {conky_pid}) conky happily wake up, reloads configuration and shows me what I want to see. I dont have anything USB realted in my monitor.
View 2 Replies View RelatedRunning FC13 on Dell E6410. Everything was great until I ran the latest update about a week back. I started to see (or actually not see) that after resume from sleep the mouse cursor will disappear. It is there, just not work showing. If i click on left click on the desktop I get the menu, I can also "see" going over windows from time to time as I move it. I'm currently running 2.6.33.6-147.fc13.i686.PAE I think previously it was /vmlinuz-2.6.33.5-124.fc13.i686.PAE Nvidia driver is 195.36.31
View 1 Replies View RelatedSaid that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
when I type "conky" in terminal it returns with Conky: invalid configuration file '/home/user/.conkyrc' Conky: missing text block in configuration; exiting ***** Imlib2 Developer Warning ***** : This program is calling the Imlib call: imlib_context_free(); With the parameter: context being NULL. Please fix your program. I've tried completely uninstalling, rebooting, then reinstalling, still same error?
View 3 Replies View RelatedI have a problem with conky. It draws a black background instead of using pseudo-transparency. I ofc tried to achieve this with feh but to no avail. All the instructions here failed: Conky Hardcore! Conky transparency with KDE (3 and 4)
[Code]...
I have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
I have a suspend problem in my laptop. Sometimes, when resuming from suspend, the network adapter is down (that is, the network does not work and the light of the network adapter is off). Restarting the network service doesn't work, because I think that the system forgot about the hardware, and probably the driver should be reloaded.Does anyone knows how to do that?(ps. /etc/init.d/networking restart does not work, because the hardware driver is not being recognized anymore).
View 5 Replies View Relatedi have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
[Code]..
Whenever I choose "Restart" from the GDM screen, GDM appears to shutdown, and the first TTY is displayed with a login prompt at the bottom (assuming I haven't used that TTY). I am by no estimation a patient individual, but I waited a solid minute or two for something to happen, but nothing ever did. I end up logging in as root on that TTY and running "shutdown -r now" to get the job done. This is a shared computer, and ideally any user should be able to perform shutdown options graphically from GDM.The only mentioned workaround doesn't apply to me as I am using the nvidia driver, not intel.
View 1 Replies View Relatedwhats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies View RelatedI found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?
My laptop won't resume after it suspends. It works fine under win 7 so it's not the hardware. The light says it's on and it's pretty much a blank screen. I'm not sure whether it's operational but the screen is off. It has exactly the same resault a waiting for the blank screen except it won't go back on.
View 9 Replies View RelatedI've just upgraded from 9.10 to 10.04 via the upgrade manager. Prior to the upgrade I was able to suspend and hibernate without any problems. Now that I have upgraded to 10.04, I can suspend however when I resume I am back at the gdm login prompt, logging in again with a new session.Having just done another test whilst writing this, it actually appears that if I select suspend from the top right I am suspended and can resume my session. If I close the lid on my laptop (which is supposed to suspend) I am logged out and suspended.Also, Hibernate doesn't work as well - sometimes it never actually hibernates (just sits on a black screen) and sometimes it doesn't resume (it's never hibernated and resumed correctly since the upgrade)
View 9 Replies View RelatedI have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
i am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
This issue happens on both my Dell D630 and my homebuilt desktop, so I'm pretty sure that its not a hardware issue. Both installs are clean new installs with encrypted home directories. Computers go to sleep just fine but when I wake them, karmic is unresponsive and stuck in IO wait for the majority of the time. How can I gather enough information to submit a useful bug report?
View 1 Replies View RelatedWhatever way I suspend my laptop (menu, keyboard shortcut, close lid), it seems to suspend just find (no panic lights, suspend LED indicator flashing as expected). However, when i try to resume, the laptop seems to begin the proper wakeup process (for example, the DVD-drive is tested), there's a lot of HDD activity for about 5 seconds, screen does not power on, and then the laptop just shuts off.
System setup:
lucid beta 2, fully updated (just check now)
LG E-500 laptop /w nvidia gforce mobile 8400G
bios version 1.17 from June 2007 (not sure this is important)
Things I tried:
* Completely remove anything to do with gpu drivers and installed nvidia-current driver.
* Suspend stress test described here. this didn't work at all. The first test failed (with ac adapter attached) and the second test suspended but didn't automatically resume (see "the behavior" above). Also, when I booted up again, no apport bug report is created. I tried both with rtc set to utc=yes and utc=no. with utc=yes, the second test did automatically resume, but the same problem happened (laptop shutdown while resuming).
* The debugging steps described here, but I couldn't get the "no_console_suspend" option to work. I tried adding both "no_console_suspend" and "no_console_suspend=1" (without quotes) to the boot script in the grub menu, but when I did pm-suspend in tty1, the laptop really did suspend. I would like to try to do this again if someone could explain how to add this option.
Notes:
* Not sure this is relevant, but when I boot up after a failed resume attempt, wireless network is disabled (this only happens after a failed resume!!!).
* I found a package called nvram-wakeup in synaptic that seems to be related to this. This package is not installed. Should I install it?
In case this is relevant, forgot to mention I'm running ubuntu in dual-boot along side windows7.
I don't have any problems with 9.04 at all with suspend & resume just shutdown (wont power off usb saitek keyboard & razer mouse) but i don't care for that I prefer suspend & resume. However trying 9.10 suspend works while resume gets a black screen & locks up. Now on 10.04 it will suspend very fast but will not power up from resume keyboard & usb power is turned off thats what I can't figure out I have checked bios & changes settings after settings & nothing happens. I know in windows everything works but i do not want windows at all I prefer linux (ubuntu). In my asus eee pc 1001p suspend & resume works with both 9.10 & 10.04.
View 7 Replies View RelatedI'm experiencing very slow resume from hibernation. Last one was nearly 3 minutes. Sure, there is 2GB of RAM to read from disk (no SSD) to memory but that long?What could I check/do?
View 4 Replies View RelatedI've read many threads here on wireless problems in 10.04. I've got it updated as of this morning.
Symptom: wireless works perfectly - doesn't drop out and starts right up at boot. But if computer (Dell Latitude D505) goes to sleep, wireless won't resume. Network Manager shows wireless networking greyed out after waking.
Here's output that should be helpful:
xxx@xxx-laptop:~$ sudo lshw -C network
[sudo] password for xxx:
*-network:0
description: Network controller
product: BCM4309 802.11a/b/g
[Code]....
I've read in several other threads here that blacklisting the wireless driver file(s) may resolve the problem.
- What driver file(s) on the computer do I blacklist?
here is my workaround on how to run a script after the PC resumes from suspend.
This is at least working on Lucid Lynx.
1. Have a look at folder /etc/pm/sleep.d/ - all scripts within this folder are automatically run as root-user after/before suspend or hibernate.
2. A script needs to look like this example:
Code:
#!/bin/bash
case "$1" in
hibernate|suspend)
ACTION BEFORE SUSPEND/HIBERNATE
[Code]....
