Ubuntu :: Laptop Crashes When Open The Lid?
May 16, 2011
I am running Ubuntu 11.04 I have a Asus Altec Lansing N61JQ-X2 laptop
Sometimes, not all the time, when I close the lid of the laptop and come back later on and open the lid the log in screen wont come up for me to enter my password. I press keys everywhere but nothing will bring up the log in screen, the only thing I can do then is to press the on button till the computer shut down and then restart again.
I had this problem with Ubuntu 10.10 as well but it seems i have this problem more often with 11.04
View 9 Replies
ADVERTISEMENT
May 10, 2010
After an upgrade to 10.04, every time I unplug the AC adapter, the laptop crashes, and immediately shuts down and restarts, and will boot up normal, and shut down again as soon as it reaches the login screen.The laptop only runs fine when the cable is plugged in.I'm assuming this has something to do with the gnome power manager.I'm running an HP Pavilion dv4-2012la .
View 5 Replies
View Related
Apr 25, 2011
I recently switched from windows 7 to ubuntu 10.10 on my Gateway NV56 laptop. I previously had used wubi on it and had no problems, but with this installation it frequently crashes to a black screen and I have to reboot via the power switch. alt+sys-req+REUISB does not work, and I have lost a lot of data to this.
My hardware is as follows
-AMD turiion X2 RM-75 2.5 GHz dual core processor
-ATI Radeon HD 3200
-4 GB memory
-500 GB SATA HDD
-6 GB Ubuntu
-41 GB linux swap
-453 GB data
View 9 Replies
View Related
Jun 20, 2011
The first time I opened banshee in 11.04 it didn't load up all my music files. I went to rescan the music library to bring them up and it froze my system.Upon restarting I tried opening banshee again and it crashed.The details are below. My previous experience with banshee are not all that great.Is there a way to make this work better or a way to remove it from 11.04 all together?Error Details:Encountered a Fatal ErrorException has been thrown by the target of an invocation.
Code:
An unhandled exception was thrown: Object reference not set to an instance of an object
at
[code]...
View 1 Replies
View Related
Feb 12, 2011
I've just installed brand new Debian 6 on an oldish Dell Inspiron 5160 laptop. This features an XGI Volari XP5 video card, which I can see reported in /var/log/Xorg.0.log.
When Debian boots it will only run in command line mode. Running startx hangs up the whole system and just displays a black screen with a few vertical stripes in different colours of dark green.
the default vesa driver for X.org doesn't play very well with the XGI video card.
I've tried running
X -configure
then
X -config /root/xorg.conf.new
This correctly detects the XGI Volari XP5 card (if you look through the xorg.conf) but running the second X command still hangs up the system.
X runs fine under Knoppix, but most recent Ubuntu distros I've tried actually hung up after the initial text-based startup section, so presumably died as soon as X started up. Debian's graphical installer worked fine, however.
View 1 Replies
View Related
Oct 10, 2009
I've got a big problem on a F10 (i386) box. I work with KDE 4.3.1. The open and save dialogue of gtk(Gnome) crashes in many applications. It works in audacity. It crashes in gimp, firefox, thunderbird, xsane and gtkpod. The is alleyways a "Segmentation fault" in the console output. See below. I all ready reinstalled all gtk-packages.
Quote:
[thomas@192 ~]$ firefox
/usr/lib/firefox-3.0.14/run-mozilla.sh: line 131: 2160 Segmentation fault "$prog" ${1+"$@"}
[thomas@192 ~]$ thunderbird
[code]....
View 2 Replies
View Related
Jan 10, 2010
I have a problem when I try to launch openoffice at fedora 12.
I have installed it with yum:
yum install openoffice.org-impress.i686
and then:
[code]...
View 14 Replies
View Related
Mar 1, 2011
My vlc player cannot open mkv files for some reason :S I checked and it seems like it complied with --enable-mkv option, so no problem in that. When I open it in the terminal and try to open mkv file, last thing in the message is "segmentation fault".
View 4 Replies
View Related
Dec 6, 2010
Well, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
View 9 Replies
View Related
Mar 12, 2010
I have been using gnucash for years and never had any problems but now every time I try to load it it crashes upon trying access an account. The sequence is that it first tells me it cannot get a lock on ANY of my files reporting that they may be in use by somebody else; this is impossible. However when I do load it the initial list of accounts installs.
However when I try to open any specific account Gnucash crashes. I am using Mepis 8.0 and Gnucash 2.2.6 directly from the repositories. I have removed it and reinstalled it but to no avail. I have tried to install version 2.2.9 as a tar file but I keep getting dependency errors despite the fact the files are installed.
View 1 Replies
View Related
Aug 12, 2011
I have some problems with my Ubuntu 11.04 x64 Maybe it's the video card because moving the windows goes very slow Wine is also doing very strange because when I try to open a game the screen blacks out and can't move my mouse and then it crashes. I have the drivers installed of my ATI Radeon HD5650 ( fglrx)
PC/Ubuntu Info:
Code:
View 1 Replies
View Related
Jan 18, 2016
I have this one comp with an Radeon (MSI-R7850) card in it and its been working fine untill I tried to open Blender (3D creation Studio) today. Blender pops open and crashes. I opened it in command line to get the output but I dont know where to go from there. Blender used to work just fine on this comp. does on my others (they're NVidia).
output;
Code: Select all:~$ blender
X server found. dri2 connection failed!
connect failed: No such file or directory
X Error of failed request: BadLength (poly request too large or internal Xlib length error)
Major opcode of failed request: 157 (GLX)
Minor opcode of failed request: 1 (X_GLXRender)
Serial number of failed request: 161
Current serial number in output stream: 164
comp;
Code: Select all~$ uname -a
Linux node-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02) x86_64 GNU/Linux
View 1 Replies
View Related
Oct 5, 2010
Open Office crashes each and every time I try to save anything, profile,ettings, documents, spreadsheets. I submitted a help ticket to redhat, the engineer had me remove and download open office once again. The problem still persists. I have waited about two weeks for a 2nd reply from redhat, so far nothing. The particulars are:I had to reload my system. I downloaded and checked the installation disks from redhat. Once the system was downloaded I tried to run Open Office, it crashed as stated. I submited a ticket and removed Open Office as instructed using the Yum command and reinstalled Open Office using yum. The installation was taking a considerable time and I had to leave the computer.When I returned the system had rebooted so I don't know if the download was successful.
View 2 Replies
View Related
Apr 4, 2011
I am new to opensuse, having migrated from Ubuntu. I have had some difficulty with power management on Ubuntu so i decided to install opensuse with kde as i heard it was good for laptops. I have had lots of trouble getting opensuse 11.4 to boot properly and to run without freezing.
I have trawled the forums and bugzilla and the documentation, e.g. SDB:ATI - openSUSE and SDB:Configuring graphics cards - openSUSE. Consequently i am now able to boot (normally), however whenever i open any application, e.g. Dolphin file manager, Firefox, etc, the tab starts to load (little circle starts spinning on the tab), and then it freezes.
At this point I can exit X Windows and enter the text mode. I have repeated this with the FGLRX and Radeon drivers running. This is always repeatable. I can also boot into level 3 and do things there.
My computer details are:
HP Pavilion dv6 3032TX
Processor - Intel i7 720 QM
Ram - 6GB
GPU - ATI Mobility Radeon 5650
Harddrive - 640GB 5400rpm
[Code]...
What i have tried so far:
1. First 4 steps on SDB:Configuring graphics cards - openSUSE
2. Install and run FGLRX
Note that i cannot failsafe boot - it never boots into X Windows and just hangs. I really do like the look and feel of opensuse and would love to use it, but at this point my only option is to try another distro.
View 3 Replies
View Related
Jan 20, 2011
I am not able to play certain movie files with MPlayer since a few days:
Code:
MPlayer dev-SVN-r32749-4.4-openSUSE Linux 11.2 (i686)-Packman (C) 2000-2010 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing somefile.wmv.
ASF file format detected.
[asfheader] Audio stream found, -aid 1
[asfheader] Video stream found, -vid 2
VIDEO: [WMV3] 640x480 24bpp 1000.000 fps 1500.0 kbps (183.1 kbyte/s)
Opening video decoder: [dmo] DMO video codecs
DMO dll supports VO Optimizations 0 1
DMO dll might use previous sample when requested
MPlayer interrupted by signal 11 in module: init_video_codec
I am not sure which filetypes are affected by this bug, but I can play *some* files. The specific file here used to work a few days ago.
Code:
kalle@hoppers:~> file somefile.wmv
somefile.wmv: Microsoft ASF
The only major thing referring to multimedia in the past few days I remember is installing 'h264enc' from Packman, however, meanwhile I uninstalled this package, yet the problem persists.
Code:
kalle@hoppers:~> grep h264enc /var/log/zypp/history
2011-01-15 20:11:53|install|h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers|Packman|c5bd1d534726472929134e5acc8f66492c52c51b
2011-01-20 22:06:20|remove |h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers
The only way of solving this was moving MPlayers config, but that did not help either.
Xine also is not able to play this video:
Code:
kalle@hoppers:~> xine somefile.wmv
Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6.
(c) 2000-2007 Das xine Team.
[wmv3 @ 0x8f78060] Extra data: 8 bits left, value: 0
xiTK received SIGSEGV signal, RIP.
View 9 Replies
View Related
Mar 30, 2011
I've installed 11.4 on the laptop. So far there hasn't been a huge leap of difference between the 11.3 and 11.4. But now I can't use Skype. It's installed and all of that. But whenever I open it, nothing happens.
View 6 Replies
View Related
Sep 18, 2010
I use slack 13.1 64 bits on my intel i7 machine. That is I can't find a flash-player plugin that works on all browsers. The firefox crashes on open. The release of adobe 64 bits plugin simply doesn't work on any browser. I use slack 13.1 64 plus kde. Anyone knows some that works?
View 6 Replies
View Related
Jan 25, 2010
installed Sketchup using Wine in Karmic, and nowwhenever I open Sketchupit crashes!Does anyone have a solution for this problem?
View 5 Replies
View Related
Nov 4, 2010
I have problem with laptop installed Ubuntu OS. Laptop can't connect Internet when open again after standby Mod. It can't receive issued IP from Router.
View 2 Replies
View Related
Dec 8, 2010
i have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.
View 4 Replies
View Related
Jan 1, 2011
I have installed openSUSE on a Compaq laptop that is approx. 10 years old. The mouse and trackpad will freeze up and a reboot is needed to fix the problem.
View 2 Replies
View Related
Mar 2, 2010
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies
View Related
Jun 23, 2010
I connected my HP Pavillion laptop to a 1360x768 Vizio TV. On the TV it displays my laptop but on my laptop it has a black screen. How do I fix it so I can see my laptop screen on my laptop and on my TV at the same time?
I used to be able to do this with this TV as well as my friend's Samsung. I'm using a VGA connector. What should I do to have my laptop screen on my laptop and on my TV at the same time?
View 1 Replies
View Related
Apr 15, 2011
I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried the cat /proc/acpi/battery/BAT1/state method but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find.
View 4 Replies
View Related
May 15, 2010
When I change the "When laptop lid is closed" option in Gnome Power Manager to either "Blank Screen" or "Do Nothing" (by manually using gconf-editor), the screen itself doesn't turn off when the lid is closed. Obviously not a huge deal, as I could just change the "idle before sleep" on certain occasions, but I liked that setting it to "Do Nothing" previously would actually turn off the screen when the lid was closed.
View 1 Replies
View Related
Jun 29, 2010
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
View 2 Replies
View Related
Dec 12, 2010
Server - Ubuntu 10.04.1 lts
Client - Kubuntu 10.10
When I try to open any nfs-mounted file using OpenOffice, I get a pop-up window titled "Document in Use". The text of the message is:
"Document file 'abcde.odt' is locked for editing by:
Unknown User
Open document read-only or open a copy of the document for editing." I then have three options - <Open Read-Only>, <Open Copy>, & <Cancel> If I cp any of these files from the mounted directory to my home dir (not mounted), I can open them without problem.Also, my firefox & thunderbird date are in this mounted directory as well (sym links to ~dan/.mozilla & ~dan/.thunderbird). Both of these apps hang when trying to open, leaving two processes behind that need to be manually killed. Again, cp'ing the data out of the nfs-mounted dir onto a local dir resolves the issue, so I am 100% confident there is nothing missing or corrupted in the firefox &/or thunderbird data...
relevant entry in /etc/fstab:
server:/nfs/dan/Documents /home/dan/Documents nfs defaults 0 0
relevant entry in server's /etc/exports:
/nfs/dan/Documents client(rw)
View 8 Replies
View Related
Dec 14, 2010
I don't know if I'm doing something wrong but I've been running Ubuntu or a variant for about a year now and suddenly every now and then one or two of my documents (open office or pdfs) have no information and they won't open.
View 6 Replies
View Related
Jan 28, 2011
I'm having sporadic issues with the openoffice.org program. Sometimes, power point presentations will crash the program and then I can't open any open office programs without rebooting the computer. The problem seems to be just with powerpoint files and I'm not sure what the issue could be.
View 7 Replies
View Related
Apr 12, 2011
So when I click Places in the Main Menu and then any directory like Desktop or Documents or Pictures the Movie Player starts, and all the files that the directory contains are in the playlist. The only way around is to click Computer which would bring me into the file manager as normal.
View 2 Replies
View Related
