Software :: GNUCash Crashes - Cannot Open Specific Account
Mar 12, 2010
I have been using gnucash for years and never had any problems but now every time I try to load it it crashes upon trying access an account. The sequence is that it first tells me it cannot get a lock on ANY of my files reporting that they may be in use by somebody else; this is impossible. However when I do load it the initial list of accounts installs.
However when I try to open any specific account Gnucash crashes. I am using Mepis 8.0 and Gnucash 2.2.6 directly from the repositories. I have removed it and reinstalled it but to no avail. I have tried to install version 2.2.9 as a tar file but I keep getting dependency errors despite the fact the files are installed.
View 1 Replies
ADVERTISEMENT
Apr 30, 2011
i have a large data file for gnucash of several years in age. when i did the upgrade, gnucash starts and loads, and the main account appears to load, but there is nothing displayed. just an empty gray space where the alternating colors of the ledger should be.the account listing loads, and i can view other smaller accounts just fine. but the main ledger does not display. however, if i click on some areas of the screen, it will display what i assume is the underlying text in the bottom status bar.
and when a window or some other graphic element 'over writes' any area, some remnants of the former image remain.
View 9 Replies
View Related
May 8, 2011
I've used GNUCash before and just didn't click with it. Has anyone here used Homebank? I was just wondering how it might compare with GNUCash?
View 3 Replies
View Related
Oct 5, 2010
I am using Red Hat LDAP (version 3) and I have passwordLockout set as "on" at global level. Is there a way to disable account lockout for a specific user?
View 1 Replies
View Related
Jul 12, 2010
how i can resend a message to specific mail account and not delete it when qtrap is enabled in a domain? If qtrap find a word in a mail, delete the mail but i want resend to
another mail address?
OS: centos 5.4
qmailinstall: qmailtoaster.
View 1 Replies
View Related
Oct 19, 2010
Is there a possibility in openldap to allow a user to only create/manage specific LDAP users?For example user "mailadmin" may only create/manage mail accounts in LDAP that are named like "m1342895"? Or a specific list of user accounts that are in a specific group?
View 1 Replies
View Related
Jul 6, 2011
Is there a way to set Linux to automatically log in to a specific user account and at the same time lock the screen? I want to save time and trigger various software that always should start up on boot, while leaving the computer unattended during startup (extra important and practical for remote control boots), by enforcing a 'screen lock' so that no-one can see what happens behind the login screen without entering the login credentials.
View 3 Replies
View Related
Sep 29, 2010
Is there any specific tools available for analysing the server crashes ? My server gets crashed frequently. What are all log files i have to visit ? I am using CentOS 5.5
View 2 Replies
View Related
May 16, 2011
I am running Ubuntu 11.04 I have a Asus Altec Lansing N61JQ-X2 laptop
Sometimes, not all the time, when I close the lid of the laptop and come back later on and open the lid the log in screen wont come up for me to enter my password. I press keys everywhere but nothing will bring up the log in screen, the only thing I can do then is to press the on button till the computer shut down and then restart again.
I had this problem with Ubuntu 10.10 as well but it seems i have this problem more often with 11.04
View 9 Replies
View Related
Jun 20, 2011
The first time I opened banshee in 11.04 it didn't load up all my music files. I went to rescan the music library to bring them up and it froze my system.Upon restarting I tried opening banshee again and it crashed.The details are below. My previous experience with banshee are not all that great.Is there a way to make this work better or a way to remove it from 11.04 all together?Error Details:Encountered a Fatal ErrorException has been thrown by the target of an invocation.
Code:
An unhandled exception was thrown: Object reference not set to an instance of an object
at
[code]...
View 1 Replies
View Related
Oct 26, 2010
I have two applications that I would like to always open up in Workspace 2, even when i restart my computer. Is there a GUI solution that can do this? One of the apps is the Sound Preference window I would like set to open with the input tab selected.
View 1 Replies
View Related
Mar 16, 2011
I have this problem, that I want a specific .exe file to open in Mono, but all other .exe files to open in Wine.
However, the only option there is, are 'Select an application to open XXXX.exe and other files of type "DOS/Windows executable"'
but I just want to open THIS .exe file in mono, and the rest in WINE.
I have been in similar situations before, in that I opened a folder containing music with VLC, and it worked fine, but after that, it assumed that I wanted to open all folders in VLC.
I assume that there must be an option for this, and I can not see why it ain't an option by default.
(I'm using Ubuntu 10.10)
View 3 Replies
View Related
Oct 10, 2009
I've got a big problem on a F10 (i386) box. I work with KDE 4.3.1. The open and save dialogue of gtk(Gnome) crashes in many applications. It works in audacity. It crashes in gimp, firefox, thunderbird, xsane and gtkpod. The is alleyways a "Segmentation fault" in the console output. See below. I all ready reinstalled all gtk-packages.
Quote:
[thomas@192 ~]$ firefox
/usr/lib/firefox-3.0.14/run-mozilla.sh: line 131: 2160 Segmentation fault "$prog" ${1+"$@"}
[thomas@192 ~]$ thunderbird
[code]....
View 2 Replies
View Related
Jan 10, 2010
I have a problem when I try to launch openoffice at fedora 12.
I have installed it with yum:
yum install openoffice.org-impress.i686
and then:
[code]...
View 14 Replies
View Related
Mar 1, 2011
My vlc player cannot open mkv files for some reason :S I checked and it seems like it complied with --enable-mkv option, so no problem in that. When I open it in the terminal and try to open mkv file, last thing in the message is "segmentation fault".
View 4 Replies
View Related
Jan 12, 2011
How do tell an application to open in a specific workspace?
More info:
I like to have my C++ IDE in workspace 2, my Java IDE in workspace 3, and my email, browser and miscellaneous in workspace four. I also use a shell script that executes upon log in code...
Of course currently it all opens in the current workspace... Is there a way for me to specify which workspace each command should start in?
View 1 Replies
View Related
Jul 15, 2010
I tried
Code:
tomboy --title-note "To Do"
but it returns
Quote:
[INFO 14:55:56.264] Initializing Mono.Addins
and opens in notification area.
but the note does not open.
View 4 Replies
View Related
May 16, 2011
Last weekend i have increased the open file size (ulimit -n) for the application user id i have update the limits.conf file with necessary inputs restarted the service and the server as well, when i check the ulimit value for the specific user by switching user from other user it shows the new value (10240) but if i login directly using the application id the ulimit value shows as 1024 which one is the default one.
View 6 Replies
View Related
Apr 8, 2009
I look after a server which accepts automatic overnight PASV FTP uploads from remote clients. When the uploads are complete, my Bash script copies the files to another location. The problem is, my script needs to be a bit smarter when it comes to detecting active FTP sessions.
I was using:
Code:
netstat -n | grep ":21 " | grep ESTABLISHED
to test if there were active sessions, but came unstuck when a local user left an unrelated FTP session active. The result - my script hung around all night thinking there was an active upload from a remote client. My server is behind a firewall, so remote clients all show an internal (NAT) address,so I can't differentiate by source IP address.I can't install LSOF or FUSER for security reasons. Is there a way I can test for active FTP sessions from specific users? I am running Red Hat Enterprise Linux Server release 5.2 (Tikanga).
View 7 Replies
View Related
Jan 18, 2016
I have this one comp with an Radeon (MSI-R7850) card in it and its been working fine untill I tried to open Blender (3D creation Studio) today. Blender pops open and crashes. I opened it in command line to get the output but I dont know where to go from there. Blender used to work just fine on this comp. does on my others (they're NVidia).
output;
Code: Select all:~$ blender
X server found. dri2 connection failed!
connect failed: No such file or directory
X Error of failed request: BadLength (poly request too large or internal Xlib length error)
Major opcode of failed request: 157 (GLX)
Minor opcode of failed request: 1 (X_GLXRender)
Serial number of failed request: 161
Current serial number in output stream: 164
comp;
Code: Select all~$ uname -a
Linux node-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02) x86_64 GNU/Linux
View 1 Replies
View Related
Oct 5, 2010
Open Office crashes each and every time I try to save anything, profile,ettings, documents, spreadsheets. I submitted a help ticket to redhat, the engineer had me remove and download open office once again. The problem still persists. I have waited about two weeks for a 2nd reply from redhat, so far nothing. The particulars are:I had to reload my system. I downloaded and checked the installation disks from redhat. Once the system was downloaded I tried to run Open Office, it crashed as stated. I submited a ticket and removed Open Office as instructed using the Yum command and reinstalled Open Office using yum. The installation was taking a considerable time and I had to leave the computer.When I returned the system had rebooted so I don't know if the download was successful.
View 2 Replies
View Related
Apr 4, 2011
I am new to opensuse, having migrated from Ubuntu. I have had some difficulty with power management on Ubuntu so i decided to install opensuse with kde as i heard it was good for laptops. I have had lots of trouble getting opensuse 11.4 to boot properly and to run without freezing.
I have trawled the forums and bugzilla and the documentation, e.g. SDB:ATI - openSUSE and SDB:Configuring graphics cards - openSUSE. Consequently i am now able to boot (normally), however whenever i open any application, e.g. Dolphin file manager, Firefox, etc, the tab starts to load (little circle starts spinning on the tab), and then it freezes.
At this point I can exit X Windows and enter the text mode. I have repeated this with the FGLRX and Radeon drivers running. This is always repeatable. I can also boot into level 3 and do things there.
My computer details are:
HP Pavilion dv6 3032TX
Processor - Intel i7 720 QM
Ram - 6GB
GPU - ATI Mobility Radeon 5650
Harddrive - 640GB 5400rpm
[Code]...
What i have tried so far:
1. First 4 steps on SDB:Configuring graphics cards - openSUSE
2. Install and run FGLRX
Note that i cannot failsafe boot - it never boots into X Windows and just hangs. I really do like the look and feel of opensuse and would love to use it, but at this point my only option is to try another distro.
View 3 Replies
View Related
Jan 20, 2011
I am not able to play certain movie files with MPlayer since a few days:
Code:
MPlayer dev-SVN-r32749-4.4-openSUSE Linux 11.2 (i686)-Packman (C) 2000-2010 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing somefile.wmv.
ASF file format detected.
[asfheader] Audio stream found, -aid 1
[asfheader] Video stream found, -vid 2
VIDEO: [WMV3] 640x480 24bpp 1000.000 fps 1500.0 kbps (183.1 kbyte/s)
Opening video decoder: [dmo] DMO video codecs
DMO dll supports VO Optimizations 0 1
DMO dll might use previous sample when requested
MPlayer interrupted by signal 11 in module: init_video_codec
I am not sure which filetypes are affected by this bug, but I can play *some* files. The specific file here used to work a few days ago.
Code:
kalle@hoppers:~> file somefile.wmv
somefile.wmv: Microsoft ASF
The only major thing referring to multimedia in the past few days I remember is installing 'h264enc' from Packman, however, meanwhile I uninstalled this package, yet the problem persists.
Code:
kalle@hoppers:~> grep h264enc /var/log/zypp/history
2011-01-15 20:11:53|install|h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers|Packman|c5bd1d534726472929134e5acc8f66492c52c51b
2011-01-20 22:06:20|remove |h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers
The only way of solving this was moving MPlayers config, but that did not help either.
Xine also is not able to play this video:
Code:
kalle@hoppers:~> xine somefile.wmv
Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6.
(c) 2000-2007 Das xine Team.
[wmv3 @ 0x8f78060] Extra data: 8 bits left, value: 0
xiTK received SIGSEGV signal, RIP.
View 9 Replies
View Related
Aug 12, 2011
I have some problems with my Ubuntu 11.04 x64 Maybe it's the video card because moving the windows goes very slow Wine is also doing very strange because when I try to open a game the screen blacks out and can't move my mouse and then it crashes. I have the drivers installed of my ATI Radeon HD5650 ( fglrx)
PC/Ubuntu Info:
Code:
View 1 Replies
View Related
Dec 25, 2010
Gnucash 2.4 has been released and I'd like to install it in my OpenSuSE 11.3 system. It isn't in any of the repositories that I have listed, although it might be in some repository I don't know about. If it's not in a repository, then I'll have to build it from source. I downloaded the source package and attempted to build it, starting with configure. I got as far as this:
configure: External QOF Disabled. Using Internal QOF Code.
checking dbi/dbi.h usability... no
checking dbi/dbi.h presence... no
checking for dbi/dbi.h... no
configure: error: Unable to find dbi/dbi.h
The perl-DBI package is installed, so that's probably not what it's looking for.So what do I need to do to install Gnucash 2.4?
View 3 Replies
View Related
Apr 13, 2011
The latest version of Gnucash available in openSUSE - and I checked the Gnome factory repo - is 2.4.0. The latest version from Gnucash was announced on Sunday and that was 2.4.5. Admittedly 2.4.1 doesn't seem to have been released and 2.4.2 had a bug in Windows but 2.4.3 was released on 27th Feb. Any reason why openSUSE seems to be lagging behind? Graham Davis, Bracknell, Berks. E-mail: change boy to man openSUSE 11.4; KDE 4.6.00; AMD Athlon X2 Dual Core Processor 5000+; Video: Radeon HD 2400 Pro; Sound: MCP61 HDA (nVidia); Wireless: BCM4318
View 3 Replies
View Related
Apr 22, 2010
I'm running OpenSuSE 11.1 and trying to install aqbanking using Yast. Gnucash tells me this: The external program "AqBanking Setup Wizard" has not been found. The aqbanking-qt3 package should include the program "qt3-wizard".check your installation to ensure this program is present. On some distributions this may require installing additional packages.When I try to install aqbanking-qt3, I get dependency problems. How can I get past this?
View 4 Replies
View Related
Apr 18, 2011
Based on Product highlights - openSUSE, it would appear that using sqlite3 in gnucash would be available. However, I do not have an option to save an existing book to the database format, nor is it available when creating a new book - only xml is available. Is there anything special that I need to do to enable the sqlite backend?
View 2 Replies
View Related
Jun 27, 2010
How to take Backup & how to do restore in GnuCash. I need to take backup of my all accounts & all transactions
View 1 Replies
View Related
Jul 27, 2010
I installed GNUCash to try it out, but ended up not liking it too much. So I went into Ubuntu Software Center and pushed remove. It was taking really long (over 25 minutes) so I restarted my system. Now it is telling me I need to first repair the installation before I can remove it.I've been trying really hard to keep my system clean and organized and now this is bugging me
View 3 Replies
View Related
