Ubuntu :: Failsafe Graphics Option In Recovery Mode Boot Fine
Nov 24, 2010
This started a few days ago and I checked back through recently installed packages and nothing looks related. If I boot into ubuntu normally, plymouth looks a mess, but then things boot fine but while the mouse is showing and ubuntu goes about with connecting to networks and so on, but it doesn't register the and input from the mouse or keyboard. It will sleep if you press the power button, but its no more responsive after waking up.
If I boot into recovery mode, and use the failsafe graphics option then everything runs fine. Apart from 3D graphics being pretty slow, which I can kind of understand. I get the same behaviour on all of the last three kernels. I'm running the latest maverick on an HP 6715b. i386 version although the processor is 64 bit compatible. 2Gb RAM.
View 1 Replies
ADVERTISEMENT
Mar 12, 2011
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
View 9 Replies
View Related
Apr 14, 2010
I've set up a triple boot system (Ubuntu Karmic, Windows Vista and OSX86 -- a patched OS X which works on a PC) on a Dell 9200 (C2D 2.13 GHz, 4GB RAM, nVidia G210). I sue Grub2 as the bootloader and update-grub picks up OS X and it boots without any problem.
However, although when booting OS X using its own Darwin bootloader, I can apply the boot option "Graphics Mode"="1680x1050x32" to ensure that I get the screen resolution that I want, when OS X boots from Grub2, the only resolution available is 1024x768 which is disappointing. I have tried adding gfxmode=1650x1050x32 to the OS X section of /boot/grub/grub.cfg in Ubuntu but this does nothing.
View 3 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Nov 5, 2015
My previously running debian system recently started failing with systemd failure messages as some services are being started. It never completes. I can log into recovery mode.
I added systemd.log_target=kmsg systemd.log_level=debug into my grub parameters.
After I do that all that I see scrolling down the page on boot are:
systemd-journald[36] /dev/kmsg buffer overrun, some messages lost
and the occasional
systemd[1] Looping too fast Throttling execution a little
Is there a way that I can boot without systemd using sysvinit?
View 4 Replies
View Related
Mar 9, 2010
last week I did an update and it may or may not be tied to the fact that now I can only login to Failsafe Gnome mode. I'm running Ubuntu 9.10 - Karmic Koala. I've had Ubuntu for a year but I'm not that familiar with it.
View 1 Replies
View Related
Oct 27, 2010
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
View 9 Replies
View Related
Nov 18, 2010
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies
View Related
May 2, 2011
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
View 9 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Nov 23, 2010
ibm a31 2 gig ram and the nasty ati mobile 7500x graphic 10.04
been working like a charm. booting up flawlessly to desktop and then I decided to change my backround and now when I boot I get just past the ubuntu with the dots screen and then a mostly black with a few white and red scratches. if I go to recovery and then start x, boot up is flawless.
View 1 Replies
View Related
Apr 6, 2011
I'm having a huge problem right now and I could use some help deciphering what's wrong.I can't get my system to boot (see signature) and even the recovery mode is buggered. henever I try to boot, all I get is a flashing underscore. This is the same for both the normal and recovery modes Kernels. I've run the boot info script from a live cd and I've attached it to this post.
View 9 Replies
View Related
Jul 6, 2010
After a lot of updates yesterday I have found that Lucid will no longer boot, I just get a blank screen that has a cursor flashing in the top left corner. I can't boot into recovery mode to see what the issue(s) might be because I took that option out when I ran update-grub.My question is this, is there a way to run update-grub -either from a live-cd or grub-rescue mode- that would put the recovery boot option back in? I have already edited the /etc/default/grub file to comment out the field.
View 3 Replies
View Related
Oct 17, 2010
Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.
My question is...is this a problem? it seems to work fine but i dont want to have problems later on.
View 4 Replies
View Related
Mar 8, 2010
This is an urgent problem. I removed my propreitary ati display drivers because I had to update them but I don't know what happened. Now I can't boot. The screen shows the Ubuntu splash screen but then the login screen does not come on. I get a blank screen. Worst of all, I had removed Recovery entries from the grub so I can't boot into recovery mode so easily. It's urgent. I don't want to reinstall with my exams a week away.
View 2 Replies
View Related
Apr 16, 2011
as Ubuntu is my only OS on this box.I had this PC running as a server for a few months with few reboots.I installed updates as usual yesterday, and hadn't changed anything configuration-wise since the last reboot. Well last night this server that I was running was moved to another Windows box and so I finally got to shut this PC down for the night. In the morning, I was greeted with an endless splash screen. It went on for 20 minutes without anything. I did update the kernel through update manager.
So what do I do? This machine has a 1TB HDD with a lot of very important data on it--reformatting is not a considerable option at this point. Which is bad because I don't know what else I could so when even recovery mode isn't working...
View 1 Replies
View Related
Aug 4, 2011
I had many problems with installing kubuntu 11.04 on my laptop HP Elitebook 8560p and after downloading different iso everything works well, but sistem freezeout and would not reboot also in recovery mode that would load untill Recovery menu when system won't responde.
View 3 Replies
View Related
Jan 19, 2010
After upgrading to 9.10 Karmic Koala, my Amilo Laptop (AMD64) refuses to boot. I installed GRUB2 which works fine for my WinXP ... and Karmic will boot in recovery mode.
When trying a normal boot, I get a black screen. CRTL-ALT-F1 yields just a blinking cursor. The system will immediately reboot when pressing CRTL-ALT-Entf.
When booting in recovery mode, I choose "Resume normal boot" from the menu, log in while in cosole mode and enter "startx" ... and the grafic environtment works fine!
Why does the system work in recovery mode, but does not start with a normal boot?
Fly.By.Wire
Here's some information on my system:
cat /proc/version
Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009
lshw
mistral
description: Notebook
product: Amilo A3667G Series
vendor: FUJITSU SIEMENS
[Code]....
View 2 Replies
View Related
Nov 13, 2010
I'm posting this in the "General Help" category, because it doesn't really fit in another one. Feel free to move this thread, if it's the wrong place. I'm having a problem with my Linux. Since today, my Kubuntu 10.10 (running on an Dell XPS M1530) doesn't but anymore.
Neither normal, nor recovery-mode is working. I also tried out different kernels in the grub-menu without any success. The boot-process stops at:
Code:
...
...
[2.115441] EXT4-fs (sda2): mounted filesystem with ordered data mode: Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
[code]....
View 7 Replies
View Related
Jan 1, 2011
I have GRUB on my laptop with Ubuntu and Windows 7. GRUB and Windows 7 seem to boot just fine, but recently, Ubuntu doesn't boot. My suspected cause is simply because I've often shut down unofficially. My laptop doesn't have a battery, and even the AC connection is awry, so as soon as an accidental disconnection or something occurs (because it too is broken), it'll essentially shut down.
I try booting Ubuntu, and it doesn't boot. I think I see that Ubuntu and the dots page, but it'll hang there (and I waited overnight). Immediately, I want to run an fsck, but I seem to be unable to, so I run Recovery Mode. I always get a forever loop of a bunch of stuff that doesn't make sense to me, but this is one thing that I always see (or something similar).
Quote:
[295.439361] EXT4-fs error (device sda5): __ext4_get_inode_loc: inode #1571 (comm pci-db) unable to read inode block 525047
View 8 Replies
View Related
Apr 30, 2011
I started a thread over in installations and upgrades in which I was trying to upgrade from Ubuntu 10.04 to 10.10 using the upgrade manager. My computer froze in the middle of the process, requiring me to restart my computer. When I try rebooting Ubuntu, I get an error message "The configuration defaults for Gnome power manager have not been installed correctly" and then a blank screen. No mouse pointer, no cursor. It will not take me to the Ubuntu desktop screen. I've already found the sudo commands I can run to try and fix Ubuntu. They are as follows:
sudo apt-get clean (If the problem is not having enough free hard drive space)
sudo dpkg --configure -a (If the problem deals with the upgrade installation process)
However, what I can't get is the terminal to come up to run these commands. In the other thread I started, someone mentioned that in the Grub menu, you can choose "recovery mode", hit "enter" to boot it, and it will give you a menu of options to choose from. However, when I choose "recovery mode" and hit "enter", I do not get a menu but instead 3 pages of data about my computer that ends with this:
"Begin: Running/scripts/init-bottom...
Done. "
It gives me a blinking cursor at the very end but I cannot type anything and I cannot page up to see the 3 pages of data. What I am looking for is a way to get to the recovery mode menu OR somehow open up a terminal so I can run the sudo commands. My computer automatically logs me in, so I do not get a login screen and Ctrl+Alt+F1 does not work for me. Anyone know how I can open a terminal with only access to the Grub menu? Perhaps a BASH command that I can use in the command line that will open up a terminal? To summarize: My computer does not boot Ubuntu. I get an error message followed by a blank screen. It does not go into the desktop screen so I cannot choose Applications->Accessories->Terminal.
My Grub menu consists of Ubuntu and it's version, Ubuntu and it's version with recovery mode, memtest, and Windows XP (I have a dual boot system). In the Grub menu, I can select "e" for edit, "c" for command line and "enter" to boot either regular Ubuntu OS or Ubuntu recovery mode. "Sudo" commands are not recognize if I choose the command line for either Ubuntu OS or recovery mode. I have a Live CD for 10.04 but you cannot run sudo commands because you do not have access to root on the Live CD.
View 1 Replies
View Related
Jan 5, 2010
i'm a recent convert from windows and my first few days with this os have been great. to think i've been living in the dark all this time...
anyway, my question is about the boot screen in bios. normally it booted up thusly:
ubuntu-linux generic [...]
ubuntu-linux generic [...] (recovery)
memory thing
windows xp
but today, the boot screen showed two instances of ubuntu generic, its recovery mode, and the memory thing (i forget what it's called exactly. do you know what i mean?). i installed the os only once.
View 2 Replies
View Related
Feb 18, 2010
I have a 8.04 x64 server installation that is receiving a kernel panic on boot no matter which kernel I choose even recovery mode.
[ 27.738620] raid1: raid set md0 active with 1 out of 2 mirrors
Done.
Begin: Running /scripts/local-premount ...
kinit: name_to_dev_t(/dev/disk/by-uuid/c224854e-37bd-491a-b895-48e8bf07fe00) = md1(9,1)
kinit: trying to resume from /dev/disk/bby-uuid/c224854e-37bd-491a-b895-48e8bf07fe00
[ 31.665733] Attempting maual resume
kinit: No resume image, doing normal boot...
Done.
[ 31.717461] kjournald starting. Commit interval 5 seconds
[ 31.717471] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
init: Error parsing configuration: No such file or directory
[ 32.064009] Kernel panic - not syncing: Attempted to kill init!
I have built a new server, now I am trying to restore my db from mysql. I have a backup that is out dated, I was hoping there was a way to copy the files over and have them work on the new installation. I can boot the server with the installation cd using recovery mode, I can get to the hdd and mount a smbfs share from the new server. I have tried to cp the files retaining the permissions and get a permission denied error, but if I copy without retaining the perms they copy just fine and do not work.
I have setup the new server with very close to the same version of all software. I have built a new instance of my service using all of the same users and passwords. I then backed up the new db and moved it over and attempted to copy the old db over. I did not copy it straight to the mysql folder as I did not share that folder out. Any other ideas to get this db recovered? What about getting my old server to run again just long enough to get a mysql dump?
View 5 Replies
View Related
Apr 25, 2010
So I have been messing around with the new 10.04 and I managed to screw it up. When I started to log off, I closed the lid to my laptop so it would hibernate, but instead the screen went black and I could only see the cursor. It stayed like that for several minutes so I shut it down manually. When I booted it up again, it froze on the splash/loading screen and I haven't been able to boot it since. I've tried to boot in recovery mode, but I think my campus internet interferes with the downloading of the necessary files from the internet. Is there any way to boot a recovery mode from the install disc? Or am I SOL?
View 6 Replies
View Related
Aug 1, 2010
I have an encrypted file system and recently installed proprietary ATI drivers for my graphics card. The moment I did that, Ubuntu boots with a black screen. Now I'm attempting to get back into the OS to remove the drivers, but when I choose Ubuntu Recovery Mode from the grub boot screen, it shows some dmesg output and then the screen goes black. Whats interesting is it doesn't even ask me to decrypt the hard drive (like it normally does). how I can get back into the OS to remove the drivers?
View 4 Replies
View Related
Sep 20, 2010
I installed ubuntu 10.04 by wubi. It works perfect until I installed and ran "startupmanager". I find that I can't enter ubuntu, even in recovery mode. The screen keeps showing "rstslog main process ended, respawning [fail]" and other text
View 4 Replies
View Related
Nov 20, 2010
My friend asked me to look at their laptop as it was not booting up. I checked it and found that you could not even boot into safe mode. I have used a windows boot disk to try and sort any issues but this has not worked. The problem is he never made the recovery disks by the manufacturer so I cant reinstall windows. I can access all the files on the hard drive when running Ubuntu. So what I need to know is it possible to run the manufacturers program to make the recovery disks from Ubuntu.
View 3 Replies
View Related
Jun 28, 2011
I tried to make Compiz work using the experimental 3D support of the free Nvidia driver, because I am suffering from a bug in the proprietary driver (click here for launchpad entry). The free driver I mean is the one that shows up as "Experimental 3D support for NVIDIA cards" in the "Additional Drivers" manager (note: for some reason, this option will only present itself when no proprietary driver is currently active).
Now the strange thing is: the driver does not provide 3d support, and behaves generally awful (lots of glitches and so on) when I boot my system normally. But when instead I boot from the grub menu into recovery mode, then select "failsafe graphics", and then select "restart X", the whole thing works perfectly! So now I am running the experimental 3d driver, I have compositing working, 3d animations on docky. Somehow, the failsafe boot sequence does something right that my normal boot sequence does not. When I reboot in normal mode, everything is screwed up again.
I have no idea what statistics about my system I should include here, because I really have no idea what could possibly be wrong. I am running 32bits Natty in Classic mode, on an Ahtlon Dual Core 4850e machine, with a GeForce 6150 LE graphics card. These are the normal and recovery entries in my grub.cfg:
Code:
menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
[code]....
View 2 Replies
View Related
Aug 18, 2010
I've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
View 2 Replies
View Related
Jan 18, 2010
i am not able to start gnome desktop though most gnome applications work in icewm and xfce4 newly installed. the system config edit button i cannot understand what keys where to edit? how do we reinstall gnome fully? by the way my system is
intel 845 mother board[gigabyte]
LG Studioworks 520Si monitor.
250 80 Gb disks
512mb mem
LG dvd writer
View 9 Replies
View Related
