I have an ubuntu desktop and vista home premium laptop. Is there a way to install SAP on ubuntu? Is there a way to install AS400 on ubuntu?I am out of job, and need to gain more knowladge and practice on different subject.
View 1 RepliesIm trying to install iSeriesAccess in ubuntu 10.04. I have found some articles in installing iSeriesAccess in older versions in ubuntu. but unfortunately those steps did not work with 10.04. this is the article that i have followed URL...
View 3 Replies View RelatedI tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedIf I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedIn /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
I have an apparently stable installation of Xubuntu that I've hand-tweaked in a few ways. I'd like to be able to reinstall this system verbatim on this machine should a disk crash happen, etc.Is there a "standard" method to create an install and/or total-backup CD that would be an instantiation of the currently-installed-and-modified system?
View 1 Replies View RelatedI am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View RelatedTrying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies View RelatedI downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
View 3 Replies View RelatedI'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies View RelatedInstalling Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies View RelatedI am on 10.10 using Gnome 2. When I go to install GIMP via Terminal, SPM or USC I get an error about not being able to install libpoppler-glib4. Odd thing is I have the updated version.
View 6 Replies View RelatedI am a rookie. Yesterday, I intended to install a dictionary with the command sudo apt-get install dict-xdict, but it turned out to fail with the error. Then, I quited with Ctrl+ c, and I did not care much till today because when I want install something else today, the error keeps coming out. Therefore, I think I would better remove dict-xdict first, so I use sudo apt-get remove dict-xdict, but the error still appears:
[Code]...
I have already tries sudo apt-get -f install dict-xdict and it doesn't work out. I am hoping to install some other applications now, but I have not idea what I could do to fix this problem or just circumvent it
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
I'm trying to migrate from Ubuntu to OpenSUSE but for some reason I can't get the install to work. I've tried installing the GNOME live CD both from a CD and a USB but after I select installation it goes to the loading screen for a few seconds and then the screen goes black and it stays like that till I reboot. Is it a problem with my hardware or something or did something miss-write when I burned the CD/USB?
View 3 Replies View RelatedWhen I run it live, I see KDE4. When I install it off the same disk, it installs Gnome. I can't figure out how to install KDE4. I had no luck with apt-get install kde4 (E: Couldn't find package kde4), no luck with aptitude, no luck with Synaptic (The following packages have unresolved dependencis kdebase-runtime-bin-kde4).
View 3 Replies View RelatedI installed Kubuntu-Desktop on Ubuntu & now my Ubuntu installation is on the 2nd (data)partition! It's hard to believe but I'm looking at it from a live cd and that's what looks like happened.For right now, my main goal is to get Ubuntu back.Should I make the 2nd partition bootable so I have a dual-boot option at startup? Should I make the 2nd partition bootable & not the first? Can I uninstall Kubuntu somehow & have things return to how they were?I thought I was just loading an alternative sassion to Gnome.I thought that the only thing I said yes to was to use the KDE boot manager (or whatever).
View 8 Replies View RelatedI just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
I have just installed ubuntu on my machine which doesn't have Internet. I can access the net on my laptop and copy any files over. I am wanting to install blueman to tether my iPhone. I cannot find a .deb of it, so downloaded the tar.gz but the stock install doesnt have a compiler. I could download and copy over a compiler, but I'm guessing I'm going to be here hours copying over each dependancy that I come across (I'm guessing there may be a few) how I can tether my iPhone or how I can install blueman? Does anyone know of any pre-built packages I can just copy n install?
View 5 Replies View RelatedWhat is the easiest and/or safest way to migrate my Wubi 10.04 install to a full install? Currently, my Dell XPS M1530 is currently dual-booting Ubuntu 10.04 LTS and Windows Vista Home Premium, and I've decided after using Windows a total of around 4 hours over the past 6 months that I can probably let it go. So, I don't need Windows anymore and I believe I'm ready for a full install of Ubuntu. Though, I probably will wait for 11.04 to come out first.
A few ways I've thought of already are: 1) Find an external hard drive to put the Wubi files on. 2) Upload files to an storage website. 3) Temporarily put the Wubi files onto another computer (Windows). All these meaning I would then wipe my harddrive and install Ubuntu from a CD. And by "files", I mean Documents, Pictures, Downloads, etc.
EDIT: deleting all my applications, because OpenOffice.org won't reinstall on my computer due to dependency issues while attempting to install LibreOffice. So a fresh install would be nice.
I have been running ONLY linux (ubuntu) on my computer for years now. However, a friend sucked me back into the world of MMO's (angry fist @ RIFT). So, I decided to pick up a new disc, slap windows 7 on it and now want to dual boot.Basically I had to do some disc juggling to get windows to play nice. So my windows drive is now first, then my Ubuntu drive second.Its been a while so I'm wondering how involved / what would be the steps to get grub2 to chainload into windows7 (in my head I want to say I'm going to boot into the live cd, mount the windows disc and reinstall the loader to the windows drive since its the first disc in the chain?)
View 1 Replies View RelatedI just today installed OpenSUSE 11.0 on an empty drive I had (320GB) and I had Ubuntu 10.04 on another 500 GB drive, and I have now lost my GRUB menu.
Below is the output from FDISK. how to modify bootloader?
I'd prefer to boot from the OpenSUSE side and just have Ubuntu as an option.
Ubuntu (which is on sda drive) along with OpenSUSE 11.0 (which is on sdb drive):
I've lost the ability to Install or Un-Install Packages on my Advent 4213 Netbook running Ubuntu 10.04 Desktop Edition. I keep getting an error message saying Previous installation hasn't been completed
The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.
every time I try to Install or Un-Install Packages using Ubuntu Software Centre. Is there a way to repair my Install without having to resort to doing a clean Re-Install?
Is the OEM install included on the regular CD or the alternate install CD?
View 4 Replies View RelatedI tried installing bacula and i really had no idea what i was doing and i believe it failed. I ran sudo apt-get install bacula. Anyway, I tried removing it using sudo apt-get remove bacula but now whenever i run sudo apt-get install for anything, the app will install but then show all these errors from bacula. how do i get rid of it?
View 4 Replies View RelatedI'm trying to use a persistent install of Lubuntu 10.10 on a USB flash drive. I thought it was working at first, but the wireless connection won't happen at all; period!
Whenever I click on the network Icon, all I get is a pop up message telling me I'm not connected to the wireless Then when I click on the wireless menu to select a network, the sign in window closes before I can even try to do anything with it, and then I get that "your not connected" pop up message again.
It's quite irritating. It basically won't let me sign on to a wireless Internet connection at all.Every time I do try to connect all I get is the "your not connected" message and nothing else. I'm using a 16 GB Kingston Data Traveler USB flash drive and am trying to run it on a Toshiba A100 Satellite laptop.
I've also been experimenting with a 16 GB Kingston Data Traveler 102 USB flash drive, with Linux Mint 9 LXDE installed on it and haven't had any problems with that one accessing wireless connections on the same computer.
Does anyone know what would cause this? It seems to boot well enough. But I just can't get Lubuntu 10.10 to access wireless networks to save my life. Could it be a hardware issue? I should note too that I used exactly the same USB flash drive on the same computer when giving Xubuntu 10.10 a "test drive" as a persistent install. But I didn't have any troubles like that with it.
I'm trying to install alien on an Ubuntu 10.0.4 server, which happens to be a virtual host on an ESX 4 Vmware server, in case that matters.I have a lot of experience with various Unixes over the years, especially Solaris, but we're just getting going with Linux servers here.
dstrom@webserver:~$ sudo apt-get install alien
[sudo] password for dstrom:
Reading package lists... Done[code]............
I've installed 11.04 64bit several times, and here's what happens. On install and reboot,seems to work fine. Then on 2nd boot, 2 things:1) grub has changed, the count-down counter is gone.2) will not boot in normal mode, I have to boot in reduced graphics mode, and even then only boots about 50% of the time, and then hangs on shut down.Help! I'm running 10.10, and it's got problems on my new laptop too, and was hoping 11.04 would get me where I need to be. I do NOT want to go back to windows.Some more info:Dell Vostro 3550, with Intel i3, and Radeon discrete graphics.3GB DRAM
View 8 Replies View Related