Ubuntu Installation :: Updated To 11.04 - Localhost:631 (CUPS) Don't Work?
May 2, 2011
I just upgraded to ubuntu 11.04 - now localhost:631 (CUPS) doesn't work anymore. However, I can still print. When I try to reload on localhost:631 I get: "Unable to connect - Firefox can't establish a connection to the server at localhost:631."
This is really really annoying. Please help. I've tried to google a lot, but I cannot see what's wrong. I've tried to completely re-install all cups-packages with synaptic, but that didn't work. Right now I think cups is running: $ status cups cups start/running, process 899 Worst thing is that previously today,
View 7 Replies
ADVERTISEMENT
Apr 3, 2011
So last night, ubuntu popped up with some updates. It was like...56mb or so worth. So I downloaded them. Once they were done, my mouse stopped working. (trackpad on my netbook) I restarted using the keyboard a couple times, shut it off, pulled the battery...but the mouse won't work. I havent tried an external yet, but I hope it will work so I can fix the trackpad problem. So, I loaded into Windows to check the mouse there, and it works fine. Is it a simple fix? Or, is it not so simple?
View 1 Replies
View Related
Aug 23, 2010
I'm having trouble installing 10.04, from a live dvd. The installation proceeds until 95% complete (running dpkg) then my computer shuts down. I can boot the system, but cannot download upgrades or get cups to work.
View 2 Replies
View Related
Oct 22, 2010
OK here's what I'm doing:
On terminal 1, I enter:
$ nc6 -vlp 5000
nc6: listening on 0.0.0.0 5000 ...
On terminal 2, I enter:
$ nc6 -v localhost 5000
nc6: ygt-asfandq (127.0.0.1) 5000 [5000] open
Now, as SOON as I make the connection on terminal 2, both netcats immediately quit back to the command prompt. The return code for both is 0.
I do not have ANYTHING in my firewall (I checked with sudo iptables -v -L)
I have attached a wireshark trace of the conversation..
View 2 Replies
View Related
Apr 24, 2011
I just updated my computer, 64 bit Lucid. Now my V7 mouse wont work. I know V7 is some Microsoft subsidiary, but my alternate Microsoft mouse works just fine. WTH? I have 4 of these computers in a Lab and I want them all to match. Plus, my keyboard is V7, so I'm getting paranoid that I might start getting keyboard errors.So my mouse was fine, I updated some recent updates, and now my old mouse wont work. What should I do?
View 1 Replies
View Related
Dec 23, 2010
I have Ubuntu 10.10 and i installed the lamp-server by typing:
Code:
sudo apt-get install lamp-server^
everything seemed to work fine.
[code]....
View 9 Replies
View Related
Jan 30, 2010
All my other systems work fine, tried setting mtu to 1492. Everything is set manually in network connections. Tried deleting and making a new connection. I set the dns servers in the /etc/resolve (don't remember the exact path.) I can ping servers fine. This was a fresh install of 9.10. Again, the internet worked fine until I installed the updates from the update manager.I had internet problems when I first started using ubuntu a couple years ago.
View 1 Replies
View Related
Oct 17, 2010
I can't access the web interface for cups to install a printer on Ubuntu server 10.4 tell me how to get it working right or i'll just throw the computer out the window and go with windows server, a much better, user-friendly product, like all Microsoft creations
View 1 Replies
View Related
Apr 8, 2010
I just brought up a new server on RHEL4 to replace an existing older one. The server is using CUPS for printing. I copied the cupsd.conf, printers.conf, and lpoptions files over from the old server. I also copied the printer files in the /etc/cups/ppd directory over to the new server. But I can't get printing to work. And when I run system-config-printer-tui I don't see any of the printers in the dialog box. What other file(s) am I missing?
View 1 Replies
View Related
Jun 20, 2011
I am probably going to get blasted for this statement which is a result of four days of frustration.There are many people on here who are having problems getting their printers to work with Ubuntu. In my case it is version 10:04. I have been reading and trying fixes for four days. Nothing works.Surely this has got to the attention of the people who know what they are doing and design these programs. I sure don't know how to fix this, along with a lot of other users. We are not being lazy or arrogant. Nothing seems to work.Surely someone in the hierarchy can put in a patch that fixes this problem.The fact that Ubuntu won't print for so many people surely must be a priority inhe development of this software. So, please will one of the program developers fix this problem and send out a patch.
View 8 Replies
View Related
Feb 25, 2011
I got everything working except any localhost connections from within the server. I've tried to connect using localhost, 127.0.0.1, and dedicated IP from within the server and several CMS sites I have moved over to the server and all the local host connections fail.
View 9 Replies
View Related
Jul 19, 2010
Tried CUPS-PDF on Suse 11.3 86x64 (I used it since Suse 10.3 and there was no problem with appearing Virtual Printer in manager printer or YAST2 Printer) , but Virtual Printer does not appear in Printer Manager or YAST2 - Printer . Tried to configured it with YAST2 Printer unsuccessfully . CUPS-PDF or other idea for Virtual Printer .
View 9 Replies
View Related
May 27, 2010
Ubuntu jaunty 9.04 and i installed it to my toshiba l450-02n and i updated the updates. one thing is the wireless does not work.
View 9 Replies
View Related
Jun 20, 2009
I have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
Code:
MaxLogSize 0
LogLevel info
[code]...
View 6 Replies
View Related
Feb 24, 2010
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
View 2 Replies
View Related
Feb 26, 2010
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
View 1 Replies
View Related
Apr 27, 2010
I have PDF printer on laptop, but not on work machine. Both using 11.2.How to install it on work machine (desktop)?
View 2 Replies
View Related
Feb 27, 2011
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
View 8 Replies
View Related
Mar 22, 2011
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
View 6 Replies
View Related
Feb 24, 2011
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
View 2 Replies
View Related
Feb 12, 2010
I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
View 9 Replies
View Related
May 17, 2011
I am unable to print on a new installation of Natty.The print configuration utility reports that no printing service is available. I have comfirmed that cups is installed and get a positive response to "whereis cupsd" When I attempt to start cups from the cl (service cups start) I receive the following response: start: Rejected send message, 1 matched rules; type="method_call", sender=":1.63" (uid=1000 pid=5577 comm="start cups ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init"))
There are no errors produced in the logs - either cups or syslog and if I turn apparmour to complain mode nothing improves: sudo aa-complain cupsd
I am aware of this post: [URL]... but since the workaround has no effect and in the absence of error messages I am not sure that it applies and cannot implement - and note that no print drivers are in play since I can't get cups to start.
View 2 Replies
View Related
Nov 26, 2010
i made a few updates and now i am stuck into windows. I have Windows Xp, and installed ubuntu 10.04 using wubi. I was using ubuntu, updates poped up, and after they finished i restarted and...crash!
Now, if i try to run ubuntu instead of Windows my pc will reset. I have tried to make a bootable ubuntu version into my pendrive and to use Super GRUB2 Disk, but cant launch any of them. Any idea of how to solve this problem? Maybe it ispossible to install grub from windows?
View 4 Replies
View Related
Feb 15, 2011
After upgrade to 10.10 and when i do update or tries to install/update/remove i get following message
Code:
Errors were encountered while processing:
/var/cache/apt/archives/vlc_1.1.4-1ubuntu1.3_i386.deb
[code]....
View 2 Replies
View Related
May 3, 2011
Under 10.10 the settings dialogue for Remote Desktop said that other machines can connect to this one as kubuntu.local or 192.168.1.85 but after u/g to 11.04 instead of hostname or IP it now just says 'localhost' - which won't work for obvious reasons. I use RD a lot.
Also, despite 'Always display an icon' being checked no icon is displayed in the panel. I tried checking 'Never display an icon' closing the dialogue, re-opening it and re-selecting 'Always display' it still doesn't appear.
View 1 Replies
View Related
Jan 28, 2010
I was running Update manager and my old system pull a 'freeze/lockup' before things were completed so I have tried using apt-get; I first updated then upgraded and get the same issue as in Update mgr with 2 small packages, 1 Rythmbox and 1 software center. This is the terminal just before, during and after:
-desktop:~$ sudo apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
libsmbclient libwbclient0 rhythmbox samba-common
samba-common-bin smbclient software-center
7 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
6 not fully installed or removed.
Need to get 18.4MB/20.2MB of archives.....
View 3 Replies
View Related
Feb 16, 2010
I just installed ubuntu 9.10 on a 4GB usb stick given the menu item at the top. I selected 512MB for my own user space. then I rebooted, and started updating it. I am getting almost 200 packages by default now that need to be updated.
alas, ubuntu live update now runs out of space while doing the update. this is not because 4GB is too little, but because too little space seems to be dedicated to the root partition.
what is the recommended way to have an up-to-date 9.10 copy now?
View 4 Replies
View Related
May 9, 2010
I've got a dual boot system with both Vista and Ubuntu. After upgrading to 10.04 my Vista doesn't load anymore. I select it in the Grub menu and the computer just hangs.
Are there any known fixes for this? Where do I start? I'm an Ubuntu novice, but I'm an able computer fixer.
View 1 Replies
View Related
Jun 8, 2010
I would like to know the quickest way to create either an ISO or bootable USB media that contains all the updates since the release of 10.04 for easy installations in environments that have slow Internet or no Internet. What would you all suggest?
View 4 Replies
View Related
Jun 15, 2010
I have grub dual boot. I upgraded from ubuntu 9.04 to 10.04 today, there was some questions about grub, and I marked all of the /dev. But now I cannot boot my windows partition.Windows XP is on the grub boot menu, but if I click on it, a black screen show up, and only a blinking cursor.When i boot ubuntu, I can read the ntfs partition.What do I have to do, to get windows xp to boot again?
View 5 Replies
View Related
